I think the correct way to do this is to exempt that is type from that filter, otherwise you'll mess up the graphs for everything else.
I'll try to remember that tomorrow!
Adam.
On 19 Jan 2016 21:40, Arno Mooreeleme arno.mooreleme@gmail.com wrote:
Ah got it,
The interfaces are seen as a L2VLAN So when commenting out the following option in includes/defaults.inc.php:
$config['device_traffic_iftype'][] = '/l2vlan/';
The graphs are generated like they should.
What would be the proper way to set this in the main config.php file?
On Mon, Jan 18, 2016 at 9:07 PM, Arno Mooreeleme arno.mooreleme@gmail.com wrote:
Well I have a few firewall's running in context mode in Observium now and all of them create the graphs just fine.
Only the asa 'type' is different (5515, 5525 work fine, the 5585 context does not)
so thats why i'm stumped.. :(
On Mon, Jan 18, 2016 at 8:42 PM, Markus Klock markus@best-practice.se wrote:
Hello Arno, The combined graph is always excluding all virtual interfaces to not report any traffic double, on a ASA in context-mode all interfaces are virtual which means the combined graph will not contain anything at all.
/Markus
2016-01-18 20:29 GMT+01:00 Arno Mooreeleme arno.mooreleme@gmail.com:
Still search but haven't found any clues yet. Anyone able to point in the right direction?
On Sat, Jan 16, 2016 at 10:38 AM, Arno Mooreeleme arno.mooreleme@gmail.com wrote:
We just added a host to observium for which the overview graph does not work.
It is an cisco firewall (ASA) running in context mode, the context itself has just 2 interfaces. Both these interfaces are graphed just fine when we look at the ports.
However the combined graph on the overview page just shows an 'error drawing graph'.
The problem seems to be that the RRD graph is generated without any path's to the existing RRD files. As you can see in the output below there is just an empty space for where the RRD path should be.
Any idea where to start troubleshooting this? Note that this is the only host, all other work just fine.
Performance & Output RRDTool Output: ERROR: String ends after the = sign on 'CDEF:inB='
Total time: 0.013 | RRDtool time: 0.011s RRDTool Command rrdtool graph /tmp/ddZYHLrHrQRbsOtM.png -g -Y --alt-autoscale --rigid --start 1452850542 --end 1452936942 --width 1152 --height 300 -c BACK#EEEEEE00 -c SHADEA#EEEEEE00 -c SHADEB#EEEEEE00 -c FONT#000000 -c CANVAS#FFFFFF00 -c GRID#a5a5a5 -c MGRID#FF9999 -c FRAME#5e5e5e -c ARROW#5e5e5e -R normal --font LEGEND:8:'DroidSansMono,DejaVuSansMono' --font AXIS:7:'DroidSansMono,DejaVuSansMono' --font-render-mode normal -E CDEF:inB= CDEF:outB= CDEF:octets=inB,outB,+ CDEF:doutB=outB,-1,* CDEF:inbits=inB,8,* CDEF:outbits=outB,8,* CDEF:bits=inbits,outbits,+ CDEF:doutbits=doutB,8,* VDEF:95thin=inbits,95,PERCENT VDEF:95thout=outbits,95,PERCENT CDEF:pout_tmp=doutbits,-1,* VDEF:dpout_tmp=pout_tmp,95,PERCENT CDEF:dpout_tmp2=doutbits,doutbits,-,dpout_tmp,-1,*,+ VDEF:d95thout=dpout_tmp2,FIRST VDEF:totin=inB,TOTAL VDEF:avein=inbits,AVERAGE VDEF:totout=outB,TOTAL VDEF:aveout=outbits,AVERAGE VDEF:tot=octets,TOTAL COMMENT:' \l' HRULE:999999999999999#FFFFFF:'Total Rx' GPRINT:inbits:LAST:%6.2lf%s GPRINT:inbits:AVERAGE:%6.2lf%s GPRINT:inbits:MIN:%6.2lf%s GPRINT:inbits:MAX:%6.2lf%s GPRINT:totin:%6.2lf%sB COMMENT:'\l' HRULE:999999999999999#FFFFFF:' Tx' GPRINT:outbits:LAST:%6.2lf%s GPRINT:outbits:AVERAGE:%6.2lf%s GPRINT:outbits:MIN:%6.2lf%s GPRINT:outbits:MAX:%6.2lf%s GPRINT:totout:%6.2lf%sB COMMENT:'\l' HRULE:999999999999999#FFFFFF:' Agg' GPRINT:bits:LAST:%6.2lf%s GPRINT:bits:AVERAGE:%6.2lf%s GPRINT:bits:MIN:%6.2lf%s GPRINT:bits:MAX:%6.2lf%s GPRINT:tot:%6.2lf%sB COMMENT:'\l' HRULE:0#999999
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium