Excellent!
If anyone using RH/CentOS could find the missing piece in our instructions we'd be most grateful.
But remember: we develop and test using Debian and Ubuntu only! :-)
Tom
On 07/24/2013 07:28 PM, Gerry Armstrong wrote:
Ok, so I have created a Ubuntu 12.04 server, installed Observium precisely step by step on the http://www.observium.org/wiki/Ubuntu_SVN_Installation webpage. I then added a device from the command line (as superuser) './addhost.php koe-netapp02 KOE_RO v2c' and it went through fine. I then did the './discovery.php -h all' and the './poller.php -h all' commands and no errors came up. I also added another device (koe-netapp01) using the web interface and that went through fine as well.
Both of these are showing graphical traffic now o there must be something going on in the RedHat/Centos config that is not covered in the setup that is causing the problem I was having previously.
Thanks for your assistance with this.
Gerry
On Wed, Jul 24, 2013 at 11:00 AM, Adam Armstrong adama@memetic.org wrote:
Note that we can't assist with rhel/centos installs.
Our recommended and tested platform is Debian/Ubuntu.
Adam.
Gerry Armstrong bajangerry@gmail.com wrote:
I followed the http://www.observium.org/wiki/RHEL_SVN_Installation guide step by step and had no errors with the process either. The Poller is running and I am seeing from the cron log that it is doing so and I also run it manually to see if i can get the data displayed. I do see that there is traffic being recorded but for some reason it is not being displayed. Since it is a new install I will wipe the installation and start again from scratch and see if somehow I missed a step.
On Wed, Jul 24, 2013 at 10:14 AM, Adam Armstrong adama@memetic.org wrote:
Its not clear what your problem is from your description.
I can say the issue is 99% likely to be fixed by following the install guide properly.
Adam.
Gerry Armstrong bajangerry@gmail.com wrote:
Hi Guys,
I am having a problem displaying data in the graphs. If I select an interface that has traffic reported and drill down to the graph I see all the graph entries with -nan but if I select the RealTime graph I can see the traffic flow. Can anyone explain why this would be and how I can resolve this?
Thanks for any assistance with this.
Regards, Gerry _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium