6 Oct
2015
6 Oct
'15
3:18 p.m.
On 06.10.15 2:13, Cameron Murray wrote:
Hi adam,
Still showing as 10bps – Have updated, Discovered and polled.
Pls send debug output: ./poller.php -d -m ports -h <this_device>
Also note, this updated only in trunk (rolling) repo, stable not yet updated.
Regards,
*Cameron Murray* Remote Support Engineer
How am I doing? Please click here http://www.techpath.com.au/contact-us/feedback/ to rate my work.
*P* 1300 033 300 *F* 07 3809 3999 *E* cameron@techpath.com.au
*www.techpath.com.au http://www.techpath.com.au*
Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 *Formerly* Betta Computer Services Pty Ltd
Facebook http://www.facebook.com/techpathau
Twitter http://twitter.com/techpathau
LinkedIn http://www.linkedin.com/company/techpathau
Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd.
*From:*observium [mailto:observium-bounces@observium.org] *On Behalf Of *Adam Armstrong *Sent:* Tuesday, 6 October 2015 8:57 AM *To:* observium@observium.org *Subject:* Re: [Observium] 10gbps port showing as 10bps
There's a fix for this in SVN now. I've added code to use ifHighSpeed if ifHighSpeed is greater than ifSpeed (as it is in this case, and should never been in cases where ifSpeed is correct)
adam.
Sent from Mailbird http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campaign=sent-from-mailbird
On 05/10/2015 23:54:22, Adam Armstrong <adama@memetic.org> wrote: Lol. Look up that RFC, it isn't helpful here :P adam. Sent from Mailbird <http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campaign=sent-from-mailbird> On 05/10/2015 23:52:32, Cameron Murray <cameron@techpath.com.au> wrote: From the Manual - RFC 3416 — Management Information Base (MIB) for the Simple Network Management Protocol (SNMP) Regards, *Cameron Murray* Remote Support Engineer How am I doing? Please click here <http://www.techpath.com.au/contact-us/feedback/> to rate my work. <http://www.techpath.com.au/> *P* 1300 033 300 *F* 07 3809 3999 *E* cameron@techpath.com.au *www.techpath.com.au <http://www.techpath.com.au>* Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 *Formerly* Betta Computer Services Pty Ltd Facebook <http://www.facebook.com/techpathau> Twitter <http://twitter.com/techpathau> LinkedIn <http://www.linkedin.com/company/techpathau> Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. *From:*observium [mailto:observium-bounces@observium.org] *On Behalf Of *Cameron Murray *Sent:* Tuesday, 6 October 2015 8:46 AM *To:* Observium Network Observation System *Subject:* Re: [Observium] 10gbps port showing as 10bps Silly statement but is there such a port as 10bps? Can we adjust the config for this if 10bps then 10gbps. Regards, *Cameron Murray* Remote Support Engineer How am I doing? Please click here <http://www.techpath.com.au/contact-us/feedback/> to rate my work. <http://www.techpath.com.au/> *P* 1300 033 300 *F* 07 3809 3999 *E* cameron@techpath.com.au *www.techpath.com.au <http://www.techpath.com.au>* Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 *Formerly* Betta Computer Services Pty Ltd Facebook <http://www.facebook.com/techpathau> Twitter <http://twitter.com/techpathau> LinkedIn <http://www.linkedin.com/company/techpathau> Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. *From:*observium [mailto:observium-bounces@observium.org] *On Behalf Of *Cameron Murray *Sent:* Tuesday, 6 October 2015 8:29 AM *To:* Observium Network Observation System *Subject:* Re: [Observium] 10gbps port showing as 10bps Switch is running the newest release. Regards, *Cameron Murray* Remote Support Engineer How am I doing? Please click here <http://www.techpath.com.au/contact-us/feedback/> to rate my work. <http://www.techpath.com.au/> *P* 1300 033 300 *F* 07 3809 3999 *E* cameron@techpath.com.au *www.techpath.com.au <http://www.techpath.com.au>* Unit 2/55 Tradelink Rd, Hillcrest QLD 4118 *Formerly* Betta Computer Services Pty Ltd Facebook <http://www.facebook.com/techpathau> Twitter <http://twitter.com/techpathau> LinkedIn <http://www.linkedin.com/company/techpathau> Note: This message may contain privileged and confidential information that is the property of the intended recipient. The information herein is intended only for use of the addressee. If you are not the intended recipient, then you are requested to return e-mail to TechPath Pty Ltd and destroy any copies made. Copying or disseminating any of this message is prohibited. Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of TechPath Pty Ltd. *From:*observium [mailto:observium-bounces@observium.org] *On Behalf Of *Eduardo Schoedler *Sent:* Tuesday, 6 October 2015 8:27 AM *To:* Observium Network Observation System *Subject:* Re: [Observium] 10gbps port showing as 10bps Have you tried a newer firmware? -- Eduardo Schoedler 2015-10-05 19:24 GMT-03:00 Cameron Murray <cameron@techpath.com.au <mailto:cameron@techpath.com.au>>: It is a very new Dell switch – Possible MIB set is different? What details would you need to correct? The model is a Dell x4012 http://www.dell.com/au/business/p/networking-x-series/pd Regards, *Cameron Murray* Remote Support Engineer *From:*observium [mailto:observium-bounces@observium.org <mailto:observium-bounces@observium.org>] *On Behalf Of *Adam Armstrong *Sent:* Tuesday, 6 October 2015 8:21 AM *To:* observium@observium.org <mailto:observium@observium.org> *Subject:* Re: [Observium] 10gbps port showing as 10bps Hmm. Returning "10" for ifSpeed is strange behaviour, and the cause of this bug. I'm not sure how one should handle that! Perhaps via an OS-specific knob. adam. Sent from Mailbird <http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campaign=sent-from-mailbird> On 05/10/2015 23:19:25, Cameron Murray <cameron@techpath.com.au <mailto:cameron@techpath.com.au>> wrote: As the subject says we’ve recently installed a 10gbps Dell switch and the ports are showing as bps not gbps. *ALERT* Modify <http://cacti.bettacomputers.com.au/device/device=99/tab=alert/alert_entry=5864/> *Alert* Utilization has exceeded 80% *Entity* tengigabitethernet1/0/1 <http://cacti.bettacomputers.com.au/device/device=99/tab=port/port=2260/> *Conditions* ifInOctets_perc gt 80 (623770) ifOutOctets_perc gt 80 (631740) *Metrics* ifInOctets_perc = 623770 ifOutOctets_perc = 631740 *Duration* 3 days, 1h 13m 43s (2015-09-28 13:43:41) *Device* *Device* bne-be-l2r16-sw10g <http://cacti.bettacomputers.com.au/device/device=99/> *Hardware* *Operating System* Generic Device *Location* *Uptime* 3 days, 3h 46m 24s The ports that are trained up as 1gbps show correctly however higher do not. Port Data: port_id => 2260 device_id => 99 port_64bit => 1 port_label => tengigabitethernet1/0/1 port_label_base => null port_label_num => null port_label_short => Te1/0/1 port_descr_type => null port_descr_descr => null port_descr_circuit => null port_descr_speed => null port_descr_notes => null ifDescr => tengigabitethernet1/0/1 ifName => te1/0/1 portName => null ifIndex => 1 ifSpeed => 10 ifConnectorPresent => true ifPromiscuousMode => true ifHighSpeed => 10000 ifOperStatus => up ifAdminStatus => up ifDuplex => fullDuplex ifMtu => 1500 ifType => ethernetCsmacd ifAlias => ifPhysAddress => f8b15686e676 ifHardType => null ifLastChange => 2015-09-28 11:37:54 date-7da Australia/Brisbane (UTC+10) ifVlan => 1 ifTrunk => dot1Q ifVrf => null ignore => 0 disabled => 0 detailed => 0 deleted => 0 pagpOperationMode => null pagpPortState => null pagpPartnerDeviceId => null pagpPartnerLearnMethod => null pagpPartnerIfIndex => null pagpPartnerGroupIfIndex => null pagpPartnerDeviceName => null pagpEthcOperationMode => null pagpDeviceId => null pagpGroupIfIndex => null ifInUcastPkts => 0 ifInUcastPkts_delta => 0 ifInUcastPkts_rate => 0 ifOutUcastPkts => 0 ifOutUcastPkts_delta => 0 ifOutUcastPkts_rate => 0 ifInErrors => 0 ifInErrors_delta => 0 ifInErrors_rate => 0 ifOutErrors => 0 ifOutErrors_delta => 0 ifOutErrors_rate => 0 ifOctets_rate => 199209 ifUcastPkts_rate => 0 ifErrors_rate => 0 ifInOctets => 30302781555 ifInOctets_delta => 46292430 ifInOctets_rate => 152780 ifOutOctets => 15509016948 ifOutOctets_delta => 14067927 ifOutOctets_rate => 46429 ifInOctets_perc => 255 ifOutOctets_perc => 255 poll_time => 1444083140 poll_period => 303 ) Regards, *Cameron Murray* Remote Support Engineer
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
--
Mike Stupalov
http://observium.org
