and i hadn't removed anything:
infra [root@observ001prvitx ~]# /opt/observium/discovery.php -h ny2asr01 -m sensors –d
___ _ _ / _ \ | |__ ___ ___ _ __ __ __(_) _ _ _ __ ___ | | | || '_ \ / __| / _ | '__|\ \ / /| || | | || '_ ` _ \ | |_| || |_) |__ | __/| | \ V / | || |_| || | | | | | ___/ |_.__/ |___/ ___||_| _/ |_| __,_||_| |_| |_| Observium Professional 19.7.9962 http://www.observium.org
##### Starting discovery run at 2019-07-26 08:58:30 #####
##### ny2asr01 [362] #####
o OS Type iosxr o OS Group cisco o SNMP Version v3 o Last discovery 2019-07-26 10:41:36 o Last duration 7.97 seconds
##### Module Start: sensors #####
o CISCO-ENTITY-SENSOR-MIB o CISCO-ENVMON-MIB Fans o CISCO-ENTITY-FRU-CONTROL-MIB o CISCO-POWER-ETHERNET-EXT-MIB o POWER-ETHERNET-MIB o ENTITY-SENSOR-MIB o CISCO-RF-MIB cRFCfgRedundancyOperMode [!]cRFStatusUnitState [!]cRFStatusPeerUnitState [!]
o Duration 7.73s
##### ny2asr01 [362] completed discovery modules at 2019-07-26 08:58:38 #####
o Discovery time 7.7355 seconds
##### Finished discovery run at 2019-07-26 08:58:38 #####
o Devices Discovered 1 o Discovery Time 8.008 secs o Memory usage 14MB (peak: 14MB) o MySQL Usage Cell[1/0s] Row[5/0.001s] Rows[36/0.015s] Column[1/0s] Update[1/0.005s] Insert[1/0.004s] Delete[1/0.006s] o RRDTool Usage infra [root@observ001prvitx ~]#
On Fri, Jul 26, 2019 at 11:44 AM Edvinas Kairys edvinas.email@gmail.com wrote:
it provides, i just need to add keyword named *PHY *to get those:
show controllers tenGigE 0/0/2/3 *phy* Fri Jul 26 10:43:13.640 Summer
SFP EEPROM port: 3 Xcvr Type: SFP Xcvr Code: SFP-10G-LR Encoding: 64B66B Bit Rate: 10300 Mbps Link Reach 9u fiber (Km): 10000 meter Link Reach 9u fiber (100m): 10000 meter Vendor Name: CISCO-SUMITOMO Vendor OUI: 00.00.5f Vendor Part Number: SPP5200LR-C6 (rev.: B ) Laser wavelength: 1310 nm (fraction: 0.00 nm) Optional SFP Signal: Tx_Disable, Tx_Fault, LOS Vendor Serial Number: SPC1820003Z Date Code (yy/mm/dd): 14/05/12 lot code: 78 Diagnostic Monitoring: DOM, Int. Cal., Enhanced Options: SW RX LOS Mon., SW TX Fault Mon, SW TX Disable, Alarm/Warning Flags
MSA Data 0x0000: 03 04 07 20 00 00 00 00 : 00 00 00 06 67 00 0a 64 0x0010: 00 00 00 00 43 49 53 43 : 4f 2d 53 55 4d 49 54 4f 0x0020: 4d 4f 20 20 00 00 00 5f : 53 50 50 35 32 30 30 4c 0x0030: 52 2d 43 36 20 20 20 20 : 42 20 20 20 05 1e 00 06 0x0040: 00 1a 00 00 53 50 43 31 : 38 32 30 30 30 33 5a 20 0x0050: 20 20 20 20 31 34 30 35 : 31 32 37 38 68 f0 03 4f 0x0060: 00 00 0b a2 64 ac 18 cb : 55 a5 90 85 ec 03 97 1f 0x0070: 2e b1 97 00 00 00 00 00 : 00 00 00 00 bd 13 55 a4
Thresholds: Alarm High Warning High Warning Low Alarm Low Temperature: +75.000 C +70.000 C +0.000 C -5.000 C Voltage: 3.630 Volt 3.465 Volt 3.135 Volt 2.970 Volt Bias: 90.000 mAmps 84.000 mAmps 24.000 mAmps 20.000 mAmps Transmit Power: 2.23870 mW (3.49996 dBm) 1.12200 mW (0.49993dBm) 0.15140 mW (-8.19874 dBm) 0.06030 mW (-12.19683 dBm) Receive Power: 2.23870 mW (3.49996 dBm) 1.12200 mW (0.49993 dBm) 0.03630 mW (-14.40093 dBm) 0.01450 mW (-18.38632 dBm) Temperature: 36.688 Voltage: 3.293 Volt Tx Bias: 47.504 mAmps Tx Power: 0.44510 mW (-3.51542 dBm) Rx Power: 0.10330 mW (-9.85900 dBm) Oper. Status/Control: EEPROM Memory (A2 lower) 0x0100: 4b 00 fb 00 46 00 00 00 : 8d cc 74 04 87 5a 7a 76 0x0110: af c8 27 10 a4 10 2e e0 : 57 73 02 5b 2b d4 05 ea 0x0120: 57 73 00 91 2b d4 01 6b : 00 00 00 00 00 00 00 00 0x0130: 00 00 00 00 00 00 00 00 : 00 00 00 00 00 00 00 00 0x0140: 00 00 00 00 3f 80 00 00 : 00 00 00 00 01 00 00 00 0x0150: 01 00 00 00 01 00 00 00 : 01 00 00 00 00 00 00 3c 0x0160: 24 b0 80 a7 5c c8 11 63 : 04 09 00 00 00 00 00 00 0x0170: 00 00 00 00 00 00 00 00 : 00 00 00 00 00 00 00 01
CLEI Code: COUIA75CAA Part Number: 10-2457-02 (ver.: V02 ) Temp/Alarm/Power Flags: COM, commercial 0C to 70C Minimum Temperature: 0 Maximum Temperature: 70 Calibration Constants: LBC Scale, Temperature, Laser bias current,Output power, Product Id: SFP-10G-LR EEPROM Memory (A2 upper) 0x0180: 43 4f 55 49 41 37 35 43 : 41 41 31 30 2d 32 34 35 0x0190: 37 2d 30 32 56 30 32 20 : 01 00 46 00 00 00 00 b0 0x01a0: 00 00 00 00 00 00 00 00 : 00 00 8c dd 94 00 ac a5 0x01b0: d6 cd 00 00 1e 00 50 3e : 11 70 0f 2d 00 00 aa aa 0x01c0: 53 46 50 2d 31 30 47 2d : 4c 52 20 20 20 20 20 20 0x01d0: 20 20 20 20 32 33 00 00 : 00 00 00 00 00 00 00 2e 0x01e0: 20 26 2b 30 33 36 2b 36 : 00 00 00 00 00 00 00 00 0x01f0: 00 00 00 00 00 6b 00 00 : ff ff ff ff 00 00 00 00
Maybe this is the problem ?
On Fri, Jul 26, 2019 at 11:26 AM Klimek, Denis via observium < observium@observium.org> wrote:
@Edvinas: As you see: Your optic is not transmitting any information for those values. Or you entered wrong command on Cisco CLI ;-) Also your debug log from ./discovery is too small. Looks like you removed most of the information....
Mit freundlichem Gruß Stadtwerke Norderstedt
Denis Klimek
Professional Network Engineer IP-Systemtechnik
Tel: 040 / 521 04 – 1049 Mobil: 0151 / 652 219 06
dklimek@stadtwerke-norderstedt.de www.stadtwerke-norderstedt.de
-----Ursprüngliche Nachricht----- Von: observium [mailto:observium-bounces@observium.org] Im Auftrag von emilio brambilla via observium Gesendet: Freitag, 26. Juli 2019 09:20 An: observium@observium.org Cc: emilio brambilla Betreff: Re: [Observium] Question about health graphs on IOS-XR
hello,
On 26/07/2019 08:49, Edvinas Kairys via observium wrote:
hello !
/opt/observium/discovery.php -h ny2asr01 -m sensors –d
don't know if it's the same problem or a different one, but as we have sensors involved I'm adding this:
since 2019-07-14, after upgrade to r9962, our observium instance lost all temperature sensors on all cisco devices (many cisco switch and routers with both ios and iosxr)
it is still graphing other brands devices temperatures.
--
bye,
emilio
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium