On 2017-11-26 10:21:52, Youssef BENGELLOUN - ZAHR <ybzahr@prodware.fr> wrote:
Hello Mike,
So how come I can’t see rear-chassis Temp ?
Best regards.
This OIDs already polled in observium, read 4 mails before..
jnxOperatingDescr.9.1.0.0 = node0 Routing Engine
jnxOperatingDescr.9.2.0.0 = node1 Routing Engine
jnxOperatingTemp.9.1.0.0 = 29
jnxOperatingTemp.9.2.0.0 = 21
Youssef BENGELLOUN - ZAHR wrote:
Hello,
Ok, it is aligned with what JTAC said (see attached).
Basically, old MIBs covering old gen hardware have been re-used for new gen hardware. So, it needs revamping in order to take into consideration all the new components.
In regards with chassis temp, Observium already polls values for Front-chassis temp. Rear-chassis temp can also be polled using the following OID :
SRX4200 :
{primary:node0}
root> show snmp mib walk jnxOperatingDescr
jnxOperatingDescr.1.1.0.0 = node0 midplane
jnxOperatingDescr.2.1.1.0 = node0 Power Supply 0 @ 0/0/*
jnxOperatingDescr.2.1.2.0 = node0 Power Supply 1 @ 0/1/*
jnxOperatingDescr.7.1.0.0 = node0 FPC: FEB @ 0/*/*
jnxOperatingDescr.8.1.1.0 = node0 PIC: 8x10G-SFP @ 0/0/*
jnxOperatingDescr.9.1.0.0 = node0 Routing Engine
jnxOperatingDescr.9.1.1.0 = node0 USB Hub
{primary:node0}
root> show snmp mib walk jnxOperatingTable | match temp
jnxOperatingTemp.1.1.0.0 = 0
jnxOperatingTemp.2.1.1.0 = 0
jnxOperatingTemp.2.1.2.0 = 0
jnxOperatingTemp.7.1.0.0 = 0
jnxOperatingTemp.8.1.1.0 = 0
jnxOperatingTemp.9.1.0.0 = 31 ⇐
jnxOperatingTemp.9.1.1.0 = 0
{primary:node0}
root> show chassis routing-engine | match te
Temperature 31 degrees C / 87 degrees F
SRX5800 :
{primary:node1}
root@F07-01> show snmp mib walk jnxOperatingDescr | match engine
jnxOperatingDescr.9.1.0.0 = node0 Routing Engine 0
jnxOperatingDescr.9.2.0.0 = node0 Routing Engine 1
jnxOperatingDescr.9.3.0.0 = node1 Routing Engine 0
jnxOperatingDescr.9.4.0.0 = node1 Routing Engine 1
{primary:node1}
root@F07-01> show snmp mib walk jnxOperatingTable | match temp | match 9
jnxOperatingTemp.9.1.0.0 = 32 ⇐
jnxOperatingTemp.9.2.0.0 = 0
jnxOperatingTemp.9.3.0.0 = 34 ⇐
jnxOperatingTemp.9.4.0.0 = 0
{primary:node1}
root@F07-01> show chassis routing-engine | match temp
Temperature 32 degrees C / 89 degrees F
CPU temperature 29 degrees C / 84 degrees F
Temperature 34 degrees C / 93 degrees F
CPU temperature 30 degrees C / 86 degrees F
I’ll keep you updated regarding FAN (state / RPM speed) advancements.
Have a nice WE.
Best regards.
Le 25/11/2017 13:28, « observium au nom de Mike Stupalov » <observium-bounces@observium.org au nom de mike@observium.org> a écrit :
Youssef BENGELLOUN - ZAHR wrote:
Hello Mike,
In regards to what I just learned from JTAC, that is normal.
What about the rest of the missing sensors (back chassis temp, CPU temp) ?
I said exactly about sensors too!
No such sensors in walk output!..
Best regards.
Le 25 nov. 2017 à 11:59, Mike Stupalov <mike@observium.org
<mailto:mike@observium.org>> a écrit :
Ok, I re-read full walk for your device
and still not found any additional sensors with Fans and Temps (except
those already discussed).
Youssef BENGELLOUN - ZAHR wrote:
Hello community,
Regarding the FAN sensors state (status / speed), JTAC confirmed MIB
are missing for the newest hardware gen. They have opened a PR
1324161 to track it (see attached).
That leaves us with the rest of the missing sensors :
- Back chassis temp
- CPU temp
Mike, were you able to analyze the traces I sent you ?
Best regards.
Le 24/11/2017 09:31, « Youssef BENGELLOUN - ZAHR »
<ybzahr@prodware.fr <mailto:ybzahr@prodware.fr>> a écrit :
Hello Mike,
Your last email didn’t mention that, doesn’t matter.
Requested outputs can be found here :
https://dl.prodware.org/zljh (password : observium)
Please note that for the second OID, device times out :
root@prod-monit-002:/opt/observium# snmpbulkwalk -v 2c -c XYZ -On
fw01-par01 .1.3.6.1.4.1.2636 > snmpbulkwalk-1361412636.txt
Timeout: No Response from fw01-par01
Waiting for your feedback.
Best regards.
Le 24/11/2017 08:16, « observium au nom de Mike Stupalov »
<observium-bounces@observium.org
<mailto:observium-bounces@observium.org> au nom de
mike@observium.org <mailto:mike@observium.org>> a écrit :
Youssef BENGELLOUN - ZAHR wrote:
Hello Mike,
What is your take on this ?
About what?
You did not send the information I wrote (please re-read my
previous mail).
...
Pls send me another full walk from device, I will try to find
if here
exist another Oids with Temp.
2 commands:
snmpbulkwalk -v2c -c <community> -On <host> .1.3.6.1.2.1
snmpbulkwalk -v2c -c <community> -On <host> .1.3.6.1.4.1.2636
Best regards.
Le 23 nov. 2017 à 10:57, Mike Stupalov <mike@observium.org
<mailto:mike@observium.org>
<mailto:mike@observium.org>> a écrit :
Wheel..
Youssef BENGELLOUN - ZAHR wrote:
Hello Adam,
It appears I got mixed up copying the wrong email output. That is
what
happens when you do it while you are mobile and in between things.
My bad.
So let’s take a step back here :
_1/ regarding CPU temps :_
You are right about those two objects
(.1.3.6.1.4.1.2636.3.1.13.1.7.9.1.0.0 /
.1.3.6.1.4.1.2636.3.1.13.1.7.9.2.0.0), they are being queried
correctly and match with Chassis Temp1 - Front :
https://apps.juniper.net/mib-explorer/search.jsp#object=1.3.6.1.4.1.2636.3.1.13.1.7&product=Junos%20OS&release=15.1x49-D120
<https://apps.juniper.net/mib-explorer/search.jsp#object=1.3.6.1.4.1.2636.3.1.13.1.7&product=Junos%20OS&release=15.1x49-D120>
<https://apps.juniper.net/mib-explorer/search.jsp#object=1.3.6.1.4.1.2636.3.1.13.1.7&product=Junos%20OS&release=15.1x49-D120
<https://apps.juniper.net/mib-explorer/search.jsp#object=1.3.6.1.4.1.2636.3.1.13.1.7&product=Junos%20OS&release=15.1x49-D120>>
<https://apps.juniper.net/mib-explorer/search.jsp#object=1.3.6.1.4.1.2636.3.1.13.1.7&product=Junos%20OS&release=15.1x49-D120
<https://apps.juniper.net/mib-explorer/search.jsp#object=1.3.6.1.4.1.2636.3.1.13.1.7&product=Junos%20OS&release=15.1x49-D120>
<https://apps.juniper.net/mib-explorer/search.jsp#object=1.3.6.1.4.1.2636.3.1.13.1.7&product=Junos%20OS&release=15.1x49-D120
<https://apps.juniper.net/mib-explorer/search.jsp#object=1.3.6.1.4.1.2636.3.1.13.1.7&product=Junos%20OS&release=15.1x49-D120>>>
What is missing here are the following highlighted entries in
Yellow :
root@fw01-par01> show chassis environment
node0:
--------------------------------------------------------------------------
Class Item Status Measurement
Power FPC 0 Power Supply 0 OK
FPC 0 Power Supply 1 OK
Temp System Temp1 - Front OK 30 degrees C / 86
degrees F
System Temp2 - Back OK 40 degrees C /
104 degrees F
CPU0 Temp OK 70 degrees C /
158 degrees F
CPU1 Temp OK 61 degrees C /
141 degrees F
Fans FPC 0 Fan Tray 0 OK Spinning at
normal speed
FPC 0 Fan Tray 1 OK Spinning at normal
speed
FPC 0 Fan Tray 2 OK Spinning at normal
speed
FPC 0 Fan Tray 3 OK Spinning at normal
speed
I believe the rest of those entries can be found in the same MIB.
If I
poll the whole MIB, I do get results (see attached file). Is that
something you can add on your end ?
Ok, I not see "CPUX Temp" entries inside jnxOperatingTemp Oid,
here only:
jnxOperatingDescr.9.1.0.0 = node0 Routing Engine
jnxOperatingDescr.9.2.0.0 = node1 Routing Engine
jnxOperatingTemp.9.1.0.0 = 29
jnxOperatingTemp.9.2.0.0 = 21
which I not sure correctly corresponded with system temp X, since here
different values against from device CLI.
Another temp sensors which I see:
jnxFruName.9.1.0.0 = node0 Routing Engine
jnxFruName.9.2.0.0 = node1 Routing Engine
jnxFruTemp.9.1.0.0 = 30
jnxFruTemp.9.2.0.0 = 21
jnxFruType.9.1.0.0 = routingEngine
jnxFruType.9.2.0.0 = routingEngine
but this is exactly same as in jnxOperatingTemp.
Pls send me another full walk from device, I will try to find if here
exist another Oids with Temp.
2 commands:
snmpbulkwalk -v2c -c <community> -On <host> .1.3.6.1.2.1
snmpbulkwalk -v2c -c <community> -On <host> .1.3.6.1.4.1.2636
_2/ regarding FAN status / spinning speed :_
I was able to confirm with JTAC the correct MIB, it can be found
here :
https://apps.juniper.net/mib-explorer/search.jsp#object=jnxSRX4200SlotFan&product=Junos%20OS&release=15.1x49-D120
<https://apps.juniper.net/mib-explorer/search.jsp#object=jnxSRX4200SlotFan&product=Junos%20OS&release=15.1x49-D120>
<https://apps.juniper.net/mib-explorer/search.jsp#object=jnxSRX4200SlotFan&product=Junos%20OS&release=15.1x49-D120
<https://apps.juniper.net/mib-explorer/search.jsp#object=jnxSRX4200SlotFan&product=Junos%20OS&release=15.1x49-D120>>
<https://apps.juniper.net/mib-explorer/search.jsp#object=jnxSRX4200SlotFan&product=Junos%20OS&release=15.1x49-D120
<https://apps.juniper.net/mib-explorer/search.jsp#object=jnxSRX4200SlotFan&product=Junos%20OS&release=15.1x49-D120>
<https://apps.juniper.net/mib-explorer/search.jsp#object=jnxSRX4200SlotFan&product=Junos%20OS&release=15.1x49-D120
<https://apps.juniper.net/mib-explorer/search.jsp#object=jnxSRX4200SlotFan&product=Junos%20OS&release=15.1x49-D120>>>
I tried with jnxSRX4200SlotFan or 1.3.6.1.4.1.2636.1.1.2.2.143.4, I
don’t get any answers from the device :
root@prod-monit-002:~# snmpwalk -v 2c -c asp fw01-par01
1.3.6.1.4.1.2636.1.1.2.2.143.4
SNMPv2-SMI::enterprises.2636.1.1.2.2.143.4 = No Such Object available
on this agent at this OID
Or
root@fw01-par01> show snmp mib walk ascii jnxSRX4200SlotFan
root@fw01-par01> show snmp mib walk ascii
1.3.6.1.4.1.2636.1.1.2.2.143.4
I’m having JTAC check the status of the MIB implantation. I’ll keep
you updated.
Best regards.
*Youssef BENGELLOUN - ZAHR* - Consultant Expert
Prodware France
T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.fr
<mailto:ybzahr@prodware.fr>
<mailto:ybzahr@prodware.fr>
<mailto:ybzahr@prodware.fr>
------------------------------------------------------------------------
Web : prodware.fr <http://prodware.fr> <http://prodware.fr>
<http://www.prodware.fr>
<http://twitter.com/Prodware/> <http://www.facebook.com/Prodware/>
<https://www.linkedin.com/company/prodwarefrance>
<https://www.youtube.com/c/ProdwareFrance>
<http://www.viadeo.com/fr/company/prodware>
<http://www.prodware.fr/social-network/>
*De : *observium <observium-bounces@observium.org
<mailto:observium-bounces@observium.org>
<mailto:observium-bounces@observium.org>> au nom de Adam
Armstrong <adama@observium.org <mailto:adama@observium.org>
<mailto:adama@observium.org>>
*Répondre à : *Observium <observium@observium.org
<mailto:observium@observium.org>
<mailto:observium@observium.org>>
*Date : *mercredi 22 novembre 2017 à 22:47
*À : *"observium@observium.org <mailto:observium@observium.org>
<mailto:observium@observium.org>"
<observium@observium.org <mailto:observium@observium.org>
<mailto:observium@observium.org>>
*Objet : *Re: [Observium] SRX4200 FAN status missing
Both of those sensors are polled:
CMD[/usr/bin/snmpget -v2c -c *** -Pu -OQUsn -M /opt/observium/mibs
'udp':'fw01-par01':'161' .1.3.6.1.4.1.2636.3.1.13.1.7.9.1.0.0
.1.3.6.1.4.1.2636.3.1.13.1.7.9.2.0.0]
CMD EXITCODE[0]
CMD RUNTIME[0.0178s]
STDOUT[
.1.3.6.1.4.1.2636.3.1.13.1.7.9.1.0.0 = 29
.1.3.6.1.4.1.2636.3.1.13.1.7.9.2.0.0 = 21
]
SNMP STATUS[TRUE]
DescrClass
TypeOrigin
ValueEvent
Last Changed
node0 Routing Engine temperaturejunos
snmp29C
ok2017-02-02 11:40:44
node1 Routing Engine temperaturejunos
snmp21C
ok2017-10-01 07:00:02
adam.
Adam Armstrong
Managing Director & Lead Architect
Observium Limited
http://www.observium.org
http://docs.observium.org
http://jira.observium.org
On 2017-11-22 21:43:53, Youssef BENGELLOUN - ZAHR
<ybzahr@prodware.fr <mailto:ybzahr@prodware.fr>
<mailto:ybzahr@prodware.fr>> wrote:
I’m not seeing them in the device page.
Moreover, no mention at all in the poller output in debug output I
provided with my initial email.
What kind of trace do you want me to run ?
Best regards.
Le 22 nov. 2017 à 22:22, Adam Armstrong <adama@observium.org
<mailto:adama@observium.org>
<mailto:adama@observium.org>
<mailto:adama@observium.org>> a écrit :
The process of collecting temperature sensors from this table
certainly works for me.
The only requirement in the code seems to be that the value
returned isn't zero.
Are you /sure/ these sensors aren't being discovered?
adam.
Adam Armstrong
CEO & Lead Architect
Observium Limited
On 2017-11-22 21:14:23, Youssef BENGELLOUN - ZAHR
<ybzahr@prodware.fr <mailto:ybzahr@prodware.fr>
<mailto:ybzahr@prodware.fr>
<mailto:ybzahr@prodware.fr>> wrote:
CPUs temps (2x units) from race node :
root@fw01-par01> show chassis environment
node0:
--------------------------------------------------------------------------
Class Item Status Measurement
Power FPC 0 Power Supply 0 OK
FPC 0 Power Supply 1 OK
Temp System Temp1 - Front OK 29 degrees
C / 84 degrees F
System Temp2 - Back OK 39 degrees
C / 102 degrees F
CPU0 Temp OK 70 degrees
C / 158 degrees F
CPU1 Temp OK 61 degrees
C / 141 degrees F
Best regards.
Le 22 nov. 2017 à 21:53, Adam Armstrong
<adama@observium.org <mailto:adama@observium.org>
<mailto:adama@observium.org>
<mailto:adama@observium.org>> a écrit :
What is the inventory entry referred to by the
indexes 9.1.0.0 and 9.2.0.0?
We should definitely already see temperatures from
here.
BTW, i honestly tend to ignore walks without MIBs
loaded. I can easily work out what a numerical OID is
from the text, but it's not so useful the other way.
adam.
Adam Armstrong
CEO & Lead Architect
Observium Limited
On 2017-11-22 19:29:22, Youssef BENGELLOUN - ZAHR
<ybzahr@prodware.fr <mailto:ybzahr@prodware.fr>
<mailto:ybzahr@prodware.fr>
<mailto:ybzahr@prodware.fr>>
wrote:
Hi,
From Observium box, there you go :
root@prod-monit-002:~# snmpwalk -v 2c -c asp
fw01-par01 1.3.6.1.4.1.2636.4.1.2
SNMPv2-SMI::enterprises.2636.4.1.2 = No Such
Object available on this agent at this OID
⇒No answer regarding FANs.
root@prod-monit-002:~# snmpwalk -v 2c -c asp
fw01-par01 1.3.6.1.4.1.2636.3.1.13.1.7
SNMPv2-SMI::enterprises.2636.3.1.13.1.7.1.1.0.0 =
Gauge32: 0
SNMPv2-SMI::enterprises.2636.3.1.13.1.7.1.2.0.0 =
Gauge32: 0
SNMPv2-SMI::enterprises.2636.3.1.13.1.7.2.1.1.0 =
Gauge32: 0
SNMPv2-SMI::enterprises.2636.3.1.13.1.7.2.1.2.0 =
Gauge32: 0
SNMPv2-SMI::enterprises.2636.3.1.13.1.7.2.2.1.0 =
Gauge32: 0
SNMPv2-SMI::enterprises.2636.3.1.13.1.7.2.2.2.0 =
Gauge32: 0
SNMPv2-SMI::enterprises.2636.3.1.13.1.7.7.1.0.0 =
Gauge32: 0
SNMPv2-SMI::enterprises.2636.3.1.13.1.7.7.2.0.0 =
Gauge32: 0
SNMPv2-SMI::enterprises.2636.3.1.13.1.7.8.1.1.0 =
Gauge32: 0
SNMPv2-SMI::enterprises.2636.3.1.13.1.7.8.2.1.0 =
Gauge32: 0
SNMPv2-SMI::enterprises.2636.3.1.13.1.7.9.1.0.0 =
Gauge32: 29
SNMPv2-SMI::enterprises.2636.3.1.13.1.7.9.1.1.0 =
Gauge32: 0
SNMPv2-SMI::enterprises.2636.3.1.13.1.7.9.2.0.0 =
Gauge32: 23
SNMPv2-SMI::enterprises.2636.3.1.13.1.7.9.2.1.0 =
Gauge32: 0
⇒Answers are returned regarding CPU temps.
Best regards.
Le 22/11/2017 20:23, « observium au nom de Michael
» a écrit :
Youseff,
By now you should know that there can be a world
of difference between what the cli of a device can
tell you and what it actually presents out the
snmp stack.
Try running the queries to the oids from a remote
host (such as from your observium box).
If it doesn't respond to the queries, there's not
much that can be done.
Michael
On 23 November 2017 6:02:39 AM AEDT, Youssef
BENGELLOUN - ZAHR wrote:
BENGELLOUN - ZAHR Youssef - Consultant Expert
Prodware France
T : +33 979 999 000 F : +33 988 814 001 -
ybzahr@prodware.fr <mailto:ybzahr@prodware.fr>
<mailto:ybzahr@prodware.fr>
<mailto:ybzahr@prodware.fr>
Web : prodware.fr <http://prodware.fr>
<http://prodware.fr>
<http://prodware.fr>
*Youssef BENGELLOUN - ZAHR* - Consultant Expert
Prodware France
T : +33 979 999 000 - F : +33 988 814 001 -
ybzahr@prodware.fr <mailto:ybzahr@prodware.fr>
<mailto:ybzahr@prodware.fr>
<mailto:ybzahr@prodware.fr>
------------------------------------------------------------------------
Web : prodware.fr <http://prodware.fr> <http://prodware.fr>
<http://www.prodware.fr>
<http://twitter.com/Prodware/>
<http://www.facebook.com/Prodware/>
<https://www.linkedin.com/company/prodwarefrance>
<https://www.youtube.com/c/ProdwareFrance>
<http://www.viadeo.com/fr/company/prodware>
<http://www.prodware.fr/social-network/>
*Youssef BENGELLOUN - ZAHR* - Consultant Expert
Prodware France
T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.fr
<mailto:ybzahr@prodware.fr>
<mailto:ybzahr@prodware.fr>
<mailto:ybzahr@prodware.fr>
------------------------------------------------------------------------
Web : prodware.fr <http://prodware.fr> <http://prodware.fr>
<http://www.prodware.fr>
<http://twitter.com/Prodware/>
<http://www.facebook.com/Prodware/>
<https://www.linkedin.com/company/prodwarefrance>
<https://www.youtube.com/c/ProdwareFrance>
<http://www.viadeo.com/fr/company/prodware>
<http://www.prodware.fr/social-network/>
*Youssef BENGELLOUN - ZAHR* - Consultant Expert
Prodware France
T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.fr
<mailto:ybzahr@prodware.fr>
<mailto:ybzahr@prodware.fr>
------------------------------------------------------------------------
Web : prodware.fr <http://prodware.fr> <http://www.prodware.fr>
<http://twitter.com/Prodware/> <http://www.facebook.com/Prodware/>
<https://www.linkedin.com/company/prodwarefrance>
<https://www.youtube.com/c/ProdwareFrance>
<http://www.viadeo.com/fr/company/prodware>
<http://www.prodware.fr/social-network/>
BENGELLOUN - ZAHR Youssef - Consultant Expert
Prodware France
T : +33 979 999 000 F : +33 988 814 001 - ybzahr@prodware.fr
<mailto:ybzahr@prodware.fr>
Web : prodware.fr <http://prodware.fr>
BENGELLOUN - ZAHR Youssef - Consultant Expert
Prodware France
T : +33 979 999 000 F : +33 988 814 001 - ybzahr@prodware.fr
Web : prodware.fr
_______________________________________________
observium mailing list
observium@observium.org <mailto:observium@observium.org>
<mailto:observium@observium.org>
<mailto:observium@observium.org>
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________
observium mailing list
observium@observium.org
<mailto:observium@observium.org>
<mailto:observium@observium.org>
<mailto:observium@observium.org>
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________
observium mailing list
observium@observium.org
<mailto:observium@observium.org>
<mailto:observium@observium.org>
<mailto:observium@observium.org>
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________
observium mailing list
observium@observium.org
<mailto:observium@observium.org>
<mailto:observium@observium.org> <mailto:observium@observium.org>
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________
observium mailing list
observium@observium.org <mailto:observium@observium.org>
<mailto:observium@observium.org>
<mailto:observium@observium.org>
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________
observium mailing list
observium@observium.org <mailto:observium@observium.org>
<mailto:observium@observium.org>
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
--
Mike Stupalov
Observium Limited, http://observium.org
_______________________________________________
observium mailing list
observium@observium.org <mailto:observium@observium.org>
<mailto:observium@observium.org>
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________
observium mailing list
observium@observium.org <mailto:observium@observium.org>
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
--
Mike Stupalov
Observium Limited, http://observium.org
_______________________________________________
observium mailing list
observium@observium.org <mailto:observium@observium.org>
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________
observium mailing list
observium@observium.org <mailto:observium@observium.org>
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
--
Mike Stupalov
Observium Limited, http://observium.org
_______________________________________________
observium mailing list
observium@observium.org <mailto:observium@observium.org>
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
*Youssef BENGELLOUN - ZAHR* - Consultant Expert
Prodware France
T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.fr
<mailto:ybzahr@prodware.fr>
------------------------------------------------------------------------
Web : prodware.fr <http://www.prodware.fr>
<http://twitter.com/Prodware/> <http://www.facebook.com/Prodware/>
<https://www.linkedin.com/company/prodwarefrance>
<https://www.youtube.com/c/ProdwareFrance>
<http://www.viadeo.com/fr/company/prodware>
<http://www.prodware.fr/social-network/>
_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
--
Mike Stupalov
Observium Limited, http://observium.org
_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
--
Mike Stupalov
Observium Limited, http://observium.org
_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
| Youssef BENGELLOUN - ZAHR -
Consultant Expert Prodware France T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.fr |
|
|
Web : prodware.fr
|