BAM.
I thought by selecting the app, it pretty much said I want to do that (maybe a popup saying don't forget to enable unix-agent), but I won't forget that moving on.
So after enabling that, got an error saying the agent wasn't installed, so got that, opened 5665, images appeared, a few minutes later, data on the graph's.
Thanks for the patience and guidance ...
~ Lance
On 1/7/13 11:28 PM, Adam Armstrong wrote:
The agent is not enabled for that host :-)
Lance Raymond lraymond@weatherflow.com wrote:
Learning on the fly, but did a poller -h device -v and got;
mysql1.domain.com http://mysql1.domain.com 3 linux (unix) Module [ unix-agent ] disabled globally. Using hrSystemUptime (3:10:00:42.48) Uptime: 3 days, 10h 42s
Hardware: Generic x86 64-bit Version: 3.2.0-31-virtual Features: /usr/bin/distro: No such file or directory Serial: IPMI: Processor Intel Xeon E5430 @ 2.66GHz 1% Mempool Physical memory: 35.76% Mempool Virtual memory: 35.76% Storage /: 18% Polling Netstats: IP TCP UDP ICMP SNMP HR Stats: Processes Users Polling IP-MIB ipSystemStats ipv4 ipv6 Caching Oids: ifEntry ifXEntry dot3StatsDuplexStatusvalidvalid Port lo(1) HC HC VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Port eth0(2) HC HC VLAN == bps(2.5kbps/29.5kbps)bytes(10.6kB/126kB)pkts(4.6pps/3.83pps) Checking UCD DiskIO MIB: xvda1
OSPF: Processes: Areas: Ports: Neighbours:
Entity Physical: Applications: uptime netstat_ip netstat_ip_frag netstat_tcp netstat_udp netstat_icmp netstat_icmp_info netstat_snmp netstat_snmp_pkt hr_processes hr_users ucd_cpu ucd_swap_io ucd_io ucd_contexts ucd_interrupts ucd_memory ucd_load ipsystemstats_ipv4 ipsystemstats_ipv4_frag ipsystemstats_ipv6 ipsystemstats_ipv6_frag Polled in 2.781 seconds UPDATED!
MySQL: Cell[0/0s] Row[3/0s] Rows[25/0.01s] Column[0/0s] Update[7/0.02s] Insert[4/0.02s] Delete[0/0s]
On Mon, Jan 7, 2013 at 10:35 PM, Adam Armstrong <adama@memetic.org mailto:adama@memetic.org> wrote:
I just added apache/mysql agents to a clean install and it worked OK. Run the poller with -d Adam. Lance Raymond <lraymond@weatherflow.com <mailto:lraymond@weatherflow.com>> wrote: I don't see any obvious ones in either the mysql or apache ones. The path I have is; /opt/observium/rrd/mysql1.domain.com <http://mysql1.domain.com> in there I have; hr_processes.rrd port-1.rrd ucd_ssCpuRawNice.rrd hr_users.rrd port-2.rrd ucd_ssCpuRawSoftIRQ.rrd ipSystemStats-ipv4.rrd processor-hr-768.rrd ucd_ssCpuRawSystem.rrd ipSystemStats-ipv6.rrd status.rrd ucd_ssCpuRawUser.rrd mempool-hrstorage-1.rrd storage-hrstorage-_.rrd ucd_ssCpuRawWait.rrd mempool-hrstorage-3.rrd ucd_cpu.rrd ucd_ssIORawReceived.rrd netstats-icmp.rrd ucd_diskio-xvda1.rrd ucd_ssIORawSent.rrd netstats-ip.rrd ucd_load.rrd ucd_ssRawContexts.rrd netstats-snmp.rrd ucd_mem.rrd ucd_ssRawInterrupts.rrd netstats-tcp.rrd ucd_ssCpuRawIdle.rrd ucd_ssRawSwapIn.rrd netstats-udp.rrd ucd_ssCpuRawInterrupt.rrd ucd_ssRawSwapOut.rrd ospf-statistics.rrd ucd_ssCpuRawKernel.rrd uptime.rrd None of those yell out Mysql. Tnx On Mon, Jan 7, 2013 at 9:06 PM, Adam Armstrong <adama@memetic.org <mailto:adama@memetic.org>> wrote: Has it created RRDs for the applications? They'll be reasonably obviously labelled in the device's subdirectory in the rrd directory. adam. On Mon, 7 Jan 2013 21:40:45 -0500, Lance Raymond <lraymond@weatherflow.com <mailto:lraymond@weatherflow.com>> wrote: > Thanks guys. Added that and now I do see an 'apps' section. > Unfortunately, most of the graph's look like broken images, aside from > the network traffic one which has the 4 graph templates, which says error > drawing graph. > > In parallel I also setup apache which is giving all graph templates, but > all have the error drawing graph. > > So how can I test from the observium server to the server I want to test. > I would compare the question to initial testing using snmpwalk -c -v1 > server, to confirm 161 was listening etc. I want to see where the issue > resolves with both mysql, apache, etc. Apache I am sure it's just the > mod-status, but mysql is more important right now for me to get working. > > Thanks. > > > On Mon, Jan 7, 2013 at 4:54 PM, Tom Laermans > <tom.laermans@powersource.cx <mailto:tom.laermans@powersource.cx>>wrote: > >> (then, it should be detected on the next polling run) >> >> >> On 7/01/2013 22:09, Adam Armstrong wrote: >> >>> enable agent checking for that host in the device's settings. >>> >>> also make sure the agent is accessible from the observium server. >>> >>> adam. >>> >>> >>> On Mon, 7 Jan 2013 16:42:30 -0500, Lance Raymond >>> <lraymond@weatherflow.com <mailto:lraymond@weatherflow.com>> >>> wrote: >>> >>>> Checking out >>>> http://www.observium.org/wiki/**Application/MySQL#**Requirementsand<http://www.observium.org/wiki/Application/MySQL#Requirementsand> >>>> seems pretty straight forward. >>>> >>>> I have my server running, added that box and see it collecting data >>>> now. >>>> php5-cli and php-mysql are installed on both the server and mysql >>>> server >>>> >>> I >>> >>>> wish to monitor, but nothing has been added and not sure how to force >>>> check, add, etc. >>>> >>>> Docs are simple enough; I created the user with access on the remote >>>> server. Then the steps are simply; >>>> >>>> *Copy* the mysql script *from scripts/agent-local/* in your observium >>>> install to */usr/local/check_mk_agent/**local/* >>>> (/usr/lib/check_mk_agent/**local/ >>>> on Debian systems) the *server* you wish to monitor. >>>> >>>> The remote server is running ubuntu, so I create a folder; >>>> /usr/lib/check_mk_agent/local with 2 files; >>>> mysql (script) >>>> mysql.cnf >>>> >>>> I can run the script locally and get a lot of data (here is a sample); >>>> root@mysql101:/usr/lib/check_**mk_agent/local# ./mysql >>>> <<<mysql>>> >>>> a0:13362926 >>>> a1:50929 >>>> a2:4796992 >>>> a3:287789 >>>> >>>> So is it something on the server end I need to add/edit? >>>> >>>> Tnx >>>> >>> ______________________________**_________________ >>> observium mailing list >>> observium@observium.org <mailto:observium@observium.org> >>> http://postman.memetic.org/**cgi-bin/mailman/listinfo/**observium<http://postman.memetic.org/cgi-bin/mailman/listinfo/observium> >>> >> >> ______________________________**_________________ >> observium mailing list >> observium@observium.org <mailto:observium@observium.org> >> http://postman.memetic.org/**cgi-bin/mailman/listinfo/**observium<http://postman.memetic.org/cgi-bin/mailman/listinfo/observium> >> _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- *e*. lraymond@weatherflow.com <mailto:lraymond@weatherflow.com> *c.* 386.561.1509 <tel:386.561.1509> *f.*386.409.5178 <tel:386.409.5178> _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium--
*e*. lraymond@weatherflow.com mailto:lraymond@weatherflow.com *c.* 386.561.1509 *f.*386.409.5178
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium