Dear Sir,
see the bellow all message, when i tried to add host by dhanmondi.mblbd.com still it is not added. plz help me. how i can install fping individually ?
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Last login: Sat Jun 8 23:20:44 2013 from 10.0.2.12root@Observium:~# ping dhanmondi
PING dhanmondi.mblbd.com (192.168.102.2) 56(84) bytes of data.
64 bytes from dhanmondi.mblbd.com (192.168.102.2): icmp_req=1 ttl=252 time=1.81 ms
64 bytes from dhanmondi.mblbd.com (192.168.102.2): icmp_req=2 ttl=252 time=2.02 ms
64 bytes from dhanmondi.mblbd.com (192.168.102.2): icmp_req=3 ttl=252 time=1.86 ms
64 bytes from dhanmondi.mblbd.com (192.168.102.2): icmp_req=4 ttl=252 time=2.03 ms
64 bytes from dhanmondi.mblbd.com (192.168.102.2): icmp_req=5 ttl=252 time=1.85 ms
^C
--- dhanmondi.mblbd.com ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4007ms
rtt min/avg/max/mdev = 1.819/1.919/2.034/0.102 ms
root@Observium:~#
root@Observium:~# cd /opt/observium/
root@Observium:/opt/observium# ./addhost.php dhanmondi.mblbd.com xxxxxxxxx v2c
Could not ping dhanmondi.mblbd.com
Could not ping dhanmondi.mblbd.comObservium v0.13.6.4140
Add Host Tool
Usage (SNMPv1/2c): ./addhost.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6]
Usage (SNMPv3) : Config Defaults : ./addhost.php <hostname> any v3 [user] [port] [udp|udp6|tcp|tcp6]
No Auth, No Priv : ./addhost.php <hostname> nanp v3 [user] [port] [udp|udp6|tcp|tcp6]
Auth, No Priv : ./addhost.php <hostname> anp v3 <user> <password> [md5|sha] [port] [udp|udp6|tcp|tcp 6]
Auth, Priv : ./addhost.php <hostname> ap v3 <user> <password> <enckey> [md5|sha] [aes|dsa] [port] [udp|udp6|tcp|tcp6]
Remember to run discovery for the host afterwards.
root@Observium:/opt/observium# ./addhost.php dhanmondi.mblbd.com xxxxxxxxx v2c 161
Could not ping dhanmondi.mblbd.com
Could not ping dhanmondi.mblbd.comObservium v0.13.6.4140
Add Host Tool
Usage (SNMPv1/2c): ./addhost.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6]
Usage (SNMPv3) : Config Defaults : ./addhost.php <hostname> any v3 [user] [port] [udp|udp6|tcp|tcp6]
No Auth, No Priv : ./addhost.php <hostname> nanp v3 [user] [port] [udp|udp6|tcp|tcp6]
Auth, No Priv : ./addhost.php <hostname> anp v3 <user> <password> [md5|sha] [port] [udp|udp6|tcp|tcp6]
Auth, Priv : ./addhost.php <hostname> ap v3 <user> <password> <enckey> [md5|sha] [aes|dsa] [port] [udp|udp6|tcp|tcp6]
Remember to run discovery for the host afterwards.
root@Observium:/opt/observium# ./addhost.php dhanmondi.mblbd.com xxxxxxxxx v2c 161 udp
Could not ping dhanmondi.mblbd.com
Could not ping dhanmondi.mblbd.comObservium v0.13.6.4140
Add Host Tool
Usage (SNMPv1/2c): ./addhost.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6]
Usage (SNMPv3) : Config Defaults : ./addhost.php <hostname> any v3 [user] [port] [udp|udp6|tcp|tcp6]
No Auth, No Priv : ./addhost.php <hostname> nanp v3 [user] [port] [udp|udp6|tcp|tcp6]
Auth, No Priv : ./addhost.php <hostname> anp v3 <user> <password> [md5|sha] [port] [udp|udp6|tcp|tcp6]
Auth, Priv : ./addhost.php <hostname> ap v3 <user> <password> <enckey> [md5|sha] [aes|dsa] [port] [udp|udp6|tcp|tcp6]
Remember to run discovery for the host afterwards.
root@Observium:/opt/observium# ./addhost.php dhanmondi.mblbd.com xxxxxxxxx v2c 161 tcp
Could not ping dhanmondi.mblbd.com
Could not ping dhanmondi.mblbd.comObservium v0.13.6.4140
Add Host Tool
Usage (SNMPv1/2c): ./addhost.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6]
Usage (SNMPv3) : Config Defaults : ./addhost.php <hostname> any v3 [user] [port] [udp|udp6|tcp|tcp6]
No Auth, No Priv : ./addhost.php <hostname> nanp v3 [user] [port] [udp|udp6|tcp|tcp6]
Auth, No Priv : ./addhost.php <hostname> anp v3 <user> <password> [md5|sha] [port] [udp|udp6|tcp|tcp6]
Auth, Priv : ./addhost.php <hostname> ap v3 <user> <password> <enckey> [md5|sha] [aes|dsa] [port] [udp|udp6|tcp|tcp6]
Remember to run discovery for the host afterwards.
root@Observium:/opt/observium# ./addhost.php dhanmondi.mblbd.com xxxxxxxxx
Could not ping dhanmondi.mblbd.com
Could not ping dhanmondi.mblbd.com
Could not ping dhanmondi.mblbd.com
Could not ping dhanmondi.mblbd.comObservium v0.13.6.4140
Add Host Tool
Usage (SNMPv1/2c): ./addhost.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6]
Usage (SNMPv3) : Config Defaults : ./addhost.php <hostname> any v3 [user] [port] [udp|udp6|tcp|tcp6]
No Auth, No Priv : ./addhost.php <hostname> nanp v3 [user] [port] [udp|udp6|tcp|tcp6]
Auth, No Priv : ./addhost.php <hostname> anp v3 <user> <password> [md5|sha] [port] [udp|udp6|tcp|tcp6]
Auth, Priv : ./addhost.php <hostname> ap v3 <user> <password> <enckey> [md5|sha] [aes|dsa] [port] [udp|udp6|tcp|tcp6]
Remember to run discovery for the host afterwards.
root@Observium:/opt/observium#
--
Thanks &
Warm Regards.
=============================
Engr. Md. Alihyder Bhuiyan
( B.Sc. Engg. in CSE, CCNA, MCSA )
Executive Officer (Networking)
IT Division, Head Office
Mercantile Bank Limited.
Level-7, Sun Moon Star Tower
37 Dilkusha C/A, Dhaka-1000
Tel : +88 02 7113714, 7113717, 7110020, Ext: 517
Mob : +88 01191 001 606
+88 01552 444 262
+88 01611 001 606
Date: Sun, 9 Jun 2013 22:47:43 +0200
From: rob.epping@gmail.com
To: observium@observium.org
Subject: Re: [Observium] i need help// i can not add host
Your hostname is dhanmondi.mblbd.com
Observium uses FQDN
GRTNX, RobJE
On Jun 9, 2013 6:20 PM, "Muhammad Alihyder Bhuiyan" <alihyder_cse@hotmail.com> wrote:
>
> Dear Sir,
>
> I Successfully install Observium at my office but i can not add my Device on Observium for monitoring . Here all are Cisco Device and I checked that snmpwalk is working. I can ping my all cisco device by name when try to add by cli command and also from GUI but the given error message shown: Could not ping dhanmondi.
>
> It may be mentioned here that, i checked everything as per this command: Usage (SNMPv1/2c): ./addhost.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6] But still same error message shown.
>
> I also check it :
> vi config.php and add the following part.
> $config['fping'] = "/usr/sbin/fping";
>
> but can not find fping file/folder to this location /usr/sbin .
>
>
> Therefore you are requested to provide me instruction step by step for solving this problem. See the bellow message for your kind information.
>
> root@Observium:/opt/observium# ping dhanmondi
> PING dhanmondi.mblbd.com (192.168.102.2) 56(84) bytes of data.
> 64 bytes from dhanmondi.mblbd.com (192.168.102.2): icmp_req=1 ttl=252 time=1.87 ms
> 64 bytes from dhanmondi.mblbd.com (192.168.102.2): icmp_req=2 ttl=252 time=2.03 ms
> 64 bytes from dhanmondi.mblbd.com (192.168.102.2): icmp_req=3 ttl=252 time=1.96 ms
> ^C
> --- dhanmondi.mblbd.com ping statistics ---
> 3 packets transmitted, 3 received, 0% packet loss, time 2003ms
> rtt min/avg/max/mdev = 1.872/1.956/2.038/0.084 ms
> root@Observium:/opt/observium#
>
>
> root@Observium:/opt/observium# ./addhost.php dhanmondi (my snmp communicty) v2c
> Could not ping dhanmondi
> Could not ping dhanmondi
>
> Observium v0.13.6.4140
> Add Host Tool
>
> Usage (SNMPv1/2c): ./addhost.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6]
> Usage (SNMPv3) : Config Defaults : ./addhost.php <hostname> any v3 [user] [port] [udp|udp6|tcp|tcp6]
> No Auth, No Priv : ./addhost.php <hostname> nanp v3 [user] [port] [udp|udp6|tcp|tcp6]
> Auth, No Priv : ./addhost.php <hostname> anp v3 <user> <password> [md5|sha] [port] [udp|udp6|tcp|tcp6]
> Auth, Priv : ./addhost.php <hostname> ap v3 <user> <password> <enckey> [md5|sha] [aes|dsa] [port] [ud p|udp6|tcp|tcp6]
> Remember to run discovery for the host afterwards.
>
>
> root@Observium:/opt/observium#
>
> Waiting for your quick step by step instruction for solving my problem.
>
>
>
>
>
> --
> Thanks &
>
> Warm Regards.
>
> =============================
> Engr. Md. Alihyder Bhuiyan
> ( B.Sc. Engg. in CSE, CCNA, MCSA )
> Executive Officer (Networking)
> IT Division, Head Office
> Mercantile Bank Limited.
> Level-7, Sun Moon Star Tower
> 37 Dilkusha C/A, Dhaka-1000
> Tel : +88 02 7113714, 7113717, 7110020, Ext: 517
> Mob : +88 01191 001 606
> +88 01552 444 262
> +88 01611 001 606
>
>
>
> > From: rob_vanhooren@mac.com
> > Date: Sat, 8 Jun 2013 20:31:57 -0400
> > To: observium@observium.org
> > Subject: [Observium] backend DB
> >
> > curious whether anyone's farted around with using MariaDB or *gasp* PostgreSQL for their install.
> >
> >
> > _______________________________________________
> > observium mailing list
> > observium@observium.org
> > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
>
> _______________________________________________
> observium mailing list
> observium@observium.org
> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
>
_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium