Hi,
The inventory is totally unrelated to any HP MIBs. Installing the HP agent will not do anything with the content of the inventory tab.
It's the health sensors that come from there :-)
Tom
On 2015-09-17 16:04, Casper Allerslev Jensen wrote:
I get a ton of data respons when doing that.. so i assume SNMP is working completely on the server..
but i get nothing but ordinary stuff.. If i go to the inventory i don't see any HP disk controller there. Even the nics that has been identified as HP is showen as unknowen..
this is what i see in inventory and this is a ML350 gen 7 server i belive
*Fra: *"Michiel Klaver" michiel@klaver.it *Til: *"Observium Network Observation System" observium@observium.org *Sendt: *torsdag, 17. september 2015 13:59:36 *Emne: *Re: [Observium] added a HP server over snmp
if everything has been setup correctly, you should be able to check the result using an snmpwalk command via OID 1.3.6.1.4.1.232
For example: observium-box# snmpwalk -v 2c -c public your.server.hostname 1.3.6.1.4.1.232
At 17 sep. 2015, 12:06 Casper Allerslev Jensen <casper@dingit.dk <mailto:casper@dingit.dk>> wrote: i take it from the silence that HP SNMP should be pulled automaticly by observium IF HP snmp is correctly setup - right? cause im suspecting that maybe the insight manager and the others may have some issues... <email signatur.PNG> ------------------------------------------------------------------------ *Fra: *"Casper Allerslev Jensen" <casper@dingit.dk <mailto:casper@dingit.dk>> *Til: *"Observium Network Observation System" <observium@observium.org <mailto:observium@observium.org>> *Sendt: *onsdag, 16. september 2015 14:12:37 *Emne: *Re: [Observium] added a HP server over snmp and they seem to be installed aswell.. <email signatur.PNG> ------------------------------------------------------------------------ *Fra: *"Michiel Klaver" <michiel@klaver.it <mailto:michiel@klaver.it>> *Til: *"Observium Network Observation System" <observium@observium.org <mailto:observium@observium.org>> *Sendt: *onsdag, 16. september 2015 13:52:47 *Emne: *Re: [Observium] added a HP server over snmp Last time I checked, HP SNMP Agents support for Windows involved a combination of installing the Insight Manager agents and the WBEM providers: http://h20564.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=4091567&swItemId=MTX_c8d4b5186c2a4737ada0e3b63b&swEnvOid=4064 http://h20564.www2.hpe.com/hpsc/swd/public/detail?sp4ts.oid=4091567&swItemId=MTX_1b384bcfda6942928148cee308&swEnvOid=4064 Op 16 sep. 2015, om 11:38 Casper Allerslev Jensen <casper@dingit.dk <mailto:casper@dingit.dk>> wrote: Hi all, I have just added a HP server. added SNMP and set it up. The server connected fine to observium. Now i see Observium has support for HP but the data im getting is pretty mandatory server stuff so im wondering what the HP support is added? or did i do it wrong? As an example i was hoping to get some RAID info on the RAID 1 running on the server with the controller that was shipped. But all i see is C:\ which won't alert me if a disk fail. _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
