Hi,

 this MIB already exist in our code,
 but this MIB not correct for this devices (because tinycontrol devices used same oid tree as servercontrol).

I have correct MIB for such devices (LAN-MODULE), but I need access to real device(s).
Can you provide snmp access to an device?

My dev IPs: 77.222.50.30, 2a02:408:7722:5030::5030

On 19.01.17 12:27, chott@praha1.net wrote:

MIB attached for LAN Controller

Tomas Chott technický ředitel chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135	Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net

---

Od: chott@praha1.net
Odesláno: 18. ledna 2017 17:29
Komu: Observium Network Observation System
Předmět: RE: MIB Sensorgateway

It is possible add support for LAN Controller?

Tom

Tomas Chott technický ředitel chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135	Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net

---

Od: observium [observium-bounces@observium.org] za uživatele chott@praha1.net [chott@praha1.net]
Odesláno: 15. ledna 2017 22:54
Komu: observium@observium.org
Předmět: [Observium] MIB Sensorgateway

Hello team

we have lot of device LAN Controllertr http://www.tinycontrol.pl/tinycontrol/en/lan/lan_kontroler.php

in this case there is old MIB https://github.com/pgmillon/observium/blob/master/mibs/SENSORGATEWAY-MIB.mib

Probably coresponding with OIDs down, is it possible add support for this LAN Controller?

Tom

#define SYS_DESCR (99) // iso.3.6.1.2.1.1.1.0: READONLY ASCII_STRING.

#define SYS_UP_TIME (97) // iso.3.6.1.2.1.1.3.0: READONLY TIME_TICKS.

#define SYS_NAME (98) // iso.3.6.1.2.1.1.4.0: READWRITE ASCII_STRING.

#define TRAP_RECEIVER_ID (1) // iso.3.6.1.4.1.17095.2.1.1.1.0: READWRITE BYTE.

#define TRAP_RECEIVER_ENABLED (2) // iso.3.6.1.4.1.17095.2.1.1.2.0: READWRITE BYTE.

#define TRAP_RECEIVER_IP (3) // iso.3.6.1.4.1.17095.2.1.1.3.0: READWRITE IP_ADDRESS.

#define TRAP_COMMUNITY (4) // iso.3.6.1.4.1.17095.2.1.1.4.0: READWRITE ASCII_STRING.

#define OUT0 (5) // iso.3.6.1.4.1.17095.3.1.0: READWRITE BYTE.

#define OUT1 (6) // iso.3.6.1.4.1.17095.3.2.0: READWRITE BYTE.

#define OUT2 (7) // iso.3.6.1.4.1.17095.3.3.0: READWRITE BYTE.

#define OUT3 (8) // iso.3.6.1.4.1.17095.3.4.0: READWRITE BYTE.

#define OUT4 (9) // iso.3.6.1.4.1.17095.3.5.0: READWRITE BYTE.

#define ALL (90) // iso.3.6.1.4.1.17095.3.100.0: READONLY OCTET_STRING.

#define TEMP (10) // iso.3.6.1.4.1.17095.4.1.0: READONLY ASCII_STRING.

#define VCC (11) // iso.3.6.1.4.1.17095.4.2.0: READONLY ASCII_STRING.

#define INP1 (12) // iso.3.6.1.4.1.17095.4.3.0: READONLY ASCII_STRING.

#define INP2 (13) // iso.3.6.1.4.1.17095.4.4.0: READONLY ASCII_STRING.

#define INP3 (14) // iso.3.6.1.4.1.17095.4.5.0: READONLY ASCII_STRING.

#define INP4 (15) // iso.3.6.1.4.1.17095.4.6.0: READONLY ASCII_STRING.

#define INP5 (16) // iso.3.6.1.4.1.17095.4.7.0: READONLY ASCII_STRING.

#define INP6 (17) // iso.3.6.1.4.1.17095.5.1.0: READONLY ASCII_STRING.

#define INP7 (18) // iso.3.6.1.4.1.17095.5.2.0: READONLY ASCII_STRING.

#define INP8 (19) // iso.3.6.1.4.1.17095.5.3.0: READONLY ASCII_STRING.

#define INP9 (20) // iso.3.6.1.4.1.17095.5.4.0: READONLY ASCII_STRING.

#define INP10 (21) // iso.3.6.1.4.1.17095.5.5.0: READONLY ASCII_STRING.

#define INP11 (22) // iso.3.6.1.4.1.17095.5.6.0: READONLY ASCII_STRING.

#define DTH22_1 (23) // iso.3.6.1.4.1.17095.6.1.0: READONLY ASCII_STRING.

#define DTH22_2 (24) // iso.3.6.1.4.1.17095.6.2.0: READONLY ASCII_STRING.

#define I3XI5 (30) // iso.3.6.1.4.1.17095.7.1.0: READONLY ASCII_STRING.

#define PXT (31) // iso.3.6.1.4.1.17095.7.2.0: READONLY ASCII_STRING.

#define PINP4D (32) // iso.3.6.1.4.1.17095.7.3.0: READONLY ASCII_STRING.

#define PINP4D_24H (33) // iso.3.6.1.4.1.17095.7.4.0: READONLY ASCII_STRING.

#d e fin e I N P1D (41) // is o. 3. 6 .1.4.1.170 95.10.1. 0 : R E AD O N LY BY T E .

#define INP2D (42) // iso.3.6.1.4.1.17095.10.2.0: READONLY BYTE.

#define INP3D (43) // iso.3.6.1.4.1.17095.10.3.0: READONLY BYTE.

#define INP4D (44) // iso.3.6.1.4.1.17095.10.4.0: READONLY BYTE.

NUMBERS OID for SNMP

Tomas Chott technický ředitel chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135	Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net

_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

-- 
Mike Stupalov
http://observium.org

_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium