Hello,

I am researching why there are gaps in one of my bundle-ether interfaces on an ASR 1k. In the debug output of the poller, I see it collect the interface traffic from the device successfully. It collects both the high capacity and non-high capacity. Then, if I am reading the rrd update command it uses the non-high capacity interface. Below are snippets from the debug outputs. If you need the full debug I can send them directly to you.  Attached is an image of the graph. Is there something else I should be looking at? I went this route because, it is only happening on this bundle-ether interface and a TenGig interface on the same device. There is another Bundle Interface that is fine, but  it is labeled as a ifType of ieee8023adLag. In the debug it says: replacing with 64-bit...HighSpeed. Though I don’t see that with the interface below.

Thanks for your help,

Mike

[10] => Array

        (

            [ifIndex] => 10

            [ifDescr] => Bundle-Ether1

            [ifType] => propVirtual

            [ifMtu] => 1514

            [ifSpeed] => 4000000000

            [ifPhysAddress] => 10:f3:11:51:62:e3

            [ifAdminStatus] => up

            [ifOperStatus] => up

            [ifLastChange] => 0:0:03:01.93

            [ifInOctets] => 3618978420

            [ifInUcastPkts] => 934740742

            [ifInDiscards] => 1

            [ifInErrors] => 0

            [ifInUnknownProtos] => 0

            [ifOutOctets] => 165771594

            [ifOutUcastPkts] => 3087859226

            [ifOutDiscards] => 0

            [ifOutErrors] => 0

            [ifName] => Bundle-Ether1

            [ifInMulticastPkts] => 0

            [ifInBroadcastPkts] => 1

            [ifOutMulticastPkts] => 0

            [ifOutBroadcastPkts] => 2

            [ifHCInOctets] => 162052735056500

            [ifHCInUcastPkts] => 151258596102

            [ifHCInMulticastPkts] => 0

            [ifHCInBroadcastPkts] => 1

            [ifHCOutOctets] => 5441889335626

            [ifHCOutUcastPkts] => 15972761114

            [ifHCOutMulticastPkts] => 0

            [ifHCOutBroadcastPkts] => 2

            [ifLinkUpDownTrapEnable] => enabled

            [ifHighSpeed] => 4000

            [ifPromiscuousMode] => false

            [ifConnectorPresent] => false

            [ifAlias] => Transit: XXXXXXXXX 4x1GE DIA { XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX }

            [ifCounterDiscontinuityTime] => 0:0:00:18.00

       )

SQL[UPDATE `ports-state` set `poll_time` ='1400166598',`poll_period` ='99',`ifInOctets` ='',`ifInOctets_rate` ='0',`ifInOctets_delta` ='0',`ifOutOctets` ='',`ifOutOctets_rate` ='0',`ifOutOctets_delta` ='0',`ifInErrors` ='',`ifInErrors_rate` ='0',`ifInErrors_delta` ='0',`ifOutErrors` ='',`ifOutErrors_rate` ='0',`ifOutErrors_delta` ='0',`ifInUcastPkts` ='',`ifInUcastPkts_rate` ='0',`ifInUcastPkts_delta` ='0',`ifOutUcastPkts` ='',`ifOutUcastPkts_rate` ='0',`ifOutUcastPkts_delta` ='0',`ifInOctets_perc` ='0',`ifOutOctets_perc` ='0',`ifOctets_rate` ='0',`ifUcastPkts_rate` ='0',`ifErrors_rate` ='0' WHERE `port_id` = '12503']

STATE updated rows=1

Port Bundle-Ether1(10) HighSpeed, VLAN == Transit: XXXXXXXXX 4x1GE DIA { XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX }Array

(

    [type] => transit

    [descr] =>XXXXXXXXX 4x1GE DIA

    [circuit] => XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX    [speed] =>

    [notes] =>

)

==

array(

  [type]    => string(7) "transit"

  [descr]   => string(14) " XXXXXXXXX 4x1GE DIA"

  [circuit] => string(39) "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"

  [speed]   => null

  [notes]   => null

)

ifInOctets (2011367387 B) 20316842.292929 Bps 99 secs

ifOutOctets (133713987 B) 1350646.3333333 Bps 99 secs

ifInErrors (0 B) 0 Bps 99 secs

ifOutErrors (0 B) 0 Bps 99 secs

ifInUcastPkts (6083034 B) 61444.787878788 Bps 99 secs

ifOutUcastPkts (541695 B) 5471.6666666667 Bps 99 secs

bps(162Mbps/10.8Mbps)bytes(1.87GB/127MB)pkts(61.4kpps/5.47kpps)RRD[cmd[update /ramdisk/rrd/ XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/port-10.rrd N:3618978420:165771594:0:0:934740742:3087859226:U:U:1:0:0:1:2:0:0]

stdout[OK u:0.00 s:0.00 r:6.22]

stderr[]]

Checking alerts

Array

(

    [ifInOctets_rate] => 20316842.292929

    [ifOutOctets_rate] => 1350646.3333333

    [ifInErrors_rate] => 0

    [ifOutErrors_rate] => 0

    [ifInUcastPkts_rate] => 61444.787878788

    [ifOutUcastPkts_rate] => 5471.6666666667

    [ifOperStatus] => up

    [ifAdminStatus] => up

    [ifMtu] => 1514

    [ifSpeed] => 4000000000

    [ifInOctets_perc] => 4

    [ifOutOctets_perc] => 0

    [rx_ave_pktsize] => 330.65200473974

    [tx_ave_pktsize] => 246.84367956138

)