Thanks Mike,
Will try updating switch firmware
Mike Stupalov mike@observium.org wrote ..
Hi,
seems as too old firmware with HC counters issue:
ports detected as 64bit, because have ifHCInOctets/ifHCOutOctets oids, but not have any 64bit counters for Pkts (which should be): ifHCInUcastPkts/ifHCOutUcastPkts, ifHCInBroadcastPkts/ifHCOutBroadcastPkts, ifHCInMulticastPkts/ifHCOutMulticastPkts
currently no ways for use 64bit counters for octets, but 32bit for pkts..
Update firmware on your devices..
On 30.01.17 18:40, hansb@bennesen.co.uk wrote:
Thanks Mike,
Debug log from polling Dell switch
Regards Hans
Mike Stupalov mike@observium.org wrote ..
Hi,
please show/attach debug poller output for such device:
./poller.php -d -m ports -h <device>
On 30.01.17 17:18, hansb@bennesen.co.uk wrote:
Hi All
I am testing Observium, but I am having a problem with different models of
Dell
PowerConnect switches.
The counters like Unicast / Non Unicast packets does not seem to update correctly,
but work fine on Netgear and Cisco switches.
When debugging I can see that snmp poll picks up the data ifInMulticastPkts.1 = 820013 ifInMulticastPkts.2 = 689375 ifInMulticastPkts.3 = 0 ifInMulticastPkts.4 = 0 ifInMulticastPkts.5 = 0
Then in the SQL UPDATE command the counters are either 0 or empty - any ideas?
SQL UPDATE `ports` set `poll_time` ='1485773865',`poll_period` ='149',`ifInOctets`
='14157050456',`ifInOctets_rate` ='2900.8255033557',`ifOutOctets` ='74622251693',`ifOutOctets_rate` ='12147.88590604',`ifInErrors` ='1',`ifInErrors_rate` ='0',`ifInErrors_delta`
='0',`ifOutErrors`
='0',`ifOutErrors_rate` ='0',`ifOutErrors_delta` ='0',`ifInUcastPkts` ='',`ifInUcastPkts_rate` ='0',`ifOutUcastPkts` ='',`ifOutUcastPkts_rate` ='0',`ifInNUcastPkts` ='0',`ifInNUcastPkts_rate` ='0',`ifOutNUcastPkts` ='0',`ifOutNUcastPkts_rate` ='0',`ifInBroadcastPkts`
='',`ifInBroadcastPkts_rate`
='0',`ifOutBroadcastPkts` ='',`ifOutBroadcastPkts_rate` ='0',`ifInMulticastPkts` ='',`ifInMulticastPkts_rate` ='0',`ifOutMulticastPkts` ='',`ifOutMulticastPkts_rate` ='0',`ifInDiscards` ='0',`ifInDiscards_rate` ='0',`ifOutDiscards` ='0',`ifOutDiscards_rate` ='0',`ifInOctets_perc` ='0',`ifOutOctets_perc` ='0',`ifOctets_rate` ='15048.711409396',`ifUcastPkts_rate` ='0',`ifErrors_rate` ='0' WHERE `port_id`!
= '175'
In the database table field port_mcbc = 1
Kind regards Hans
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalov http://observium.org
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalov http://observium.org