Have you tried a newer firmware?
-- Eduardo Schoedler
2015-10-05 19:24 GMT-03:00 Cameron Murray cameron@techpath.com.au:
It is a very new Dell switch – Possible MIB set is different?
What details would you need to correct?
The model is a Dell x4012 http://www.dell.com/au/business/p/networking-x-series/pd
Regards,
*Cameron Murray* Remote Support Engineer
*From:* observium [mailto:observium-bounces@observium.org] *On Behalf Of *Adam Armstrong *Sent:* Tuesday, 6 October 2015 8:21 AM *To:* observium@observium.org *Subject:* Re: [Observium] 10gbps port showing as 10bps
Hmm.
Returning "10" for ifSpeed is strange behaviour, and the cause of this bug.
I'm not sure how one should handle that! Perhaps via an OS-specific knob.
adam.
Sent from Mailbird http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campaign=sent-from-mailbird
On 05/10/2015 23:19:25, Cameron Murray cameron@techpath.com.au wrote:
As the subject says we’ve recently installed a 10gbps Dell switch and the ports are showing as bps not gbps.
*ALERT*
Modify http://cacti.bettacomputers.com.au/device/device=99/tab=alert/alert_entry=5864/
*Alert*
Utilization has exceeded 80%
*Entity*
tengigabitethernet1/0/1 http://cacti.bettacomputers.com.au/device/device=99/tab=port/port=2260/
*Conditions*
ifInOctets_perc gt 80 (623770) ifOutOctets_perc gt 80 (631740)
*Metrics*
ifInOctets_perc = 623770 ifOutOctets_perc = 631740
*Duration*
3 days, 1h 13m 43s (2015-09-28 13:43:41)
*Device*
*Device*
bne-be-l2r16-sw10g http://cacti.bettacomputers.com.au/device/device=99/
*Hardware*
*Operating System*
Generic Device
*Location*
*Uptime*
3 days, 3h 46m 24s
The ports that are trained up as 1gbps show correctly however higher do not.
Port Data:
port_id => 2260
device_id => 99
port_64bit => 1
port_label => tengigabitethernet1/0/1
port_label_base => null
port_label_num => null
port_label_short => Te1/0/1
port_descr_type => null
port_descr_descr => null
port_descr_circuit => null
port_descr_speed => null
port_descr_notes => null
ifDescr => tengigabitethernet1/0/1
ifName => te1/0/1
portName => null
ifIndex => 1
ifSpeed => 10
ifConnectorPresent => true
ifPromiscuousMode => true
ifHighSpeed => 10000
ifOperStatus => up
ifAdminStatus => up
ifDuplex => fullDuplex
ifMtu => 1500
ifType => ethernetCsmacd
ifAlias =>
ifPhysAddress => f8b15686e676
ifHardType => null
ifLastChange => 2015-09-28 11:37:54
date-7da Australia/Brisbane (UTC+10)
ifVlan => 1
ifTrunk => dot1Q
ifVrf => null
ignore => 0
disabled => 0
detailed => 0
deleted => 0
pagpOperationMode => null
pagpPortState => null
pagpPartnerDeviceId => null
pagpPartnerLearnMethod => null
pagpPartnerIfIndex => null
pagpPartnerGroupIfIndex => null
pagpPartnerDeviceName => null
pagpEthcOperationMode => null
pagpDeviceId => null
pagpGroupIfIndex => null
ifInUcastPkts => 0
ifInUcastPkts_delta => 0
ifInUcastPkts_rate => 0
ifOutUcastPkts => 0
ifOutUcastPkts_delta => 0
ifOutUcastPkts_rate => 0
ifInErrors => 0
ifInErrors_delta => 0
ifInErrors_rate => 0
ifOutErrors => 0
ifOutErrors_delta => 0
ifOutErrors_rate => 0
ifOctets_rate => 199209
ifUcastPkts_rate => 0
ifErrors_rate => 0
ifInOctets => 30302781555
ifInOctets_delta => 46292430
ifInOctets_rate => 152780
ifOutOctets => 15509016948
ifOutOctets_delta => 14067927
ifOutOctets_rate => 46429
ifInOctets_perc => 255
ifOutOctets_perc => 255
poll_time => 1444083140
poll_period => 303
)
Regards,
*Cameron Murray* Remote Support Engineer