Dear Adam,

This is the page containing the whole list : http://www.juniper.net/techpubs/en_US/junos12.3/topics/concept/juniper-specific-mibs-junos-nm.html

I guess the information could be found in either of the following :

  1. IPsec Generic Flow Monitoring Object MIB—Based on jnx-ipsec-monitor-mib, this MIB provides support for monitoring IPsec and IPsec VPN management objects. This MIB is currently supported by Junos OS for J Series and SRX Series devices only. For a downloadable version of this MIB, see http://www.juniper.net/techpubs/en_US/junos12.3/topics/ reference/mibs/mib-jnx-ipsec-flow-mon.txt .

    For more information, see IPsec Generic Flow Monitoring Object MIB.

  2. IPsec Monitoring MIB—Provides operational and statistical information related to the IPsec and IKE tunnels on Juniper Networks routers. For a downloadable version of this MIB, see http://www.juniper.net/techpubs/en_US/junos12.3/topics/reference/ mibs/mib-jnx-ipsec-monitor-asp.txt .

    For more information, see IPSec Monitoring MIB.

  3. IPsec VPN Objects MIB—Provides support for monitoring IPsec and IPsec VPN management objects for Juniper security product lines. This MIB is an extension of jnx-ipsec-flow-mon.mib. This MIB is currently supported by Junos OS for J Series and SRX Series devices only. For a downloadable version of this MIB, see http://www.juniper.net/techpubs/en_US/junos12.3/topics/ reference/mibs/mib-jnx-js-ipsec-vpn.txt .
Best regards.



From: observium <observium-bounces@observium.org> on behalf of Adam Armstrong <adama@memetic.org>
Reply-To: Observium Network Observation System <observium@observium.org>
Date: vendredi 21 octobre 2016 15:53
To: Observium Network Observation System <observium@observium.org>
Subject: Re: [Observium] Check IPsec tunnel status on Juniper SRX firewalls

Is there a MiB containing these tunnels?

We don't currently collect them, but they may be addable.

Adam.



Sent from BlueMail

 

Youssef BENGELLOUN - ZAHR - Consultant Expert
Prodware France
T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.fr
Web : prodware.fr

         

 

On 21 Oct 2016, at 13:51, Youssef BENGELLOUN - ZAHR <ybzahr@prodware.fr> wrote:

Dear community,

From the information I'm guathering, observium polls the status of st interfaces (i.e. Up / Down) on Juniper SRX firewalls.

Do you know if it’s possible to check the status of IPSec tunnels (i.e. Established / Not Established / etc.) ? If so, could you share an exemple of alert checker ?

Thank you.

 

Youssef BENGELLOUN - ZAHR - Consultant Expert
Prodware France
T : +33 979 999 000 - F : +33 988 814 001 - ybzahr@prodware.fr
Web : prodware.fr

         

 


observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium