|
Tomas Chott chott@praha1.net |
Metropolitní sí» Praha 1 z.s.p.o. |
|
Od: chott@praha1.net
Odesláno: 18. ledna 2017 17:29
Komu: Observium Network Observation System
Předmět: RE: MIB Sensorgateway
Odesláno: 18. ledna 2017 17:29
Komu: Observium Network Observation System
Předmět: RE: MIB Sensorgateway
It is possible add support for LAN Controller?
Tom
|
Tomas Chott chott@praha1.net |
Metropolitní sí» Praha 1 z.s.p.o. |
|
Od: observium [observium-bounces@observium.org] za uľivatele chott@praha1.net [chott@praha1.net]
Odesláno: 15. ledna 2017 22:54
Komu: observium@observium.org
Předmět: [Observium] MIB Sensorgateway
Odesláno: 15. ledna 2017 22:54
Komu: observium@observium.org
Předmět: [Observium] MIB Sensorgateway
Hello team
we have lot of device LAN Controllertr http://www.tinycontrol.pl/tinycontrol/en/lan/lan_kontroler.php
in this case there is old MIB https://github.com/pgmillon/observium/blob/master/mibs/SENSORGATEWAY-MIB.mib
Probably coresponding with OIDs down, is it possible add support for this LAN Controller?
Tom
we have lot of device LAN Controllertr http://www.tinycontrol.pl/tinycontrol/en/lan/lan_kontroler.php
in this case there is old MIB https://github.com/pgmillon/observium/blob/master/mibs/SENSORGATEWAY-MIB.mib
Probably coresponding with OIDs down, is it possible add support for this LAN Controller?
Tom
#define SYS_DESCR (99) // iso.3.6.1.2.1.1.1.0: READONLY ASCII_STRING.
#define SYS_UP_TIME (97) // iso.3.6.1.2.1.1.3.0: READONLY TIME_TICKS.
#define SYS_NAME (98) // iso.3.6.1.2.1.1.4.0: READWRITE ASCII_STRING.
#define TRAP_RECEIVER_ID (1) // iso.3.6.1.4.1.17095.2.1.1.1.0: READWRITE BYTE.
#define TRAP_RECEIVER_ENABLED (2) // iso.3.6.1.4.1.17095.2.1.1.2.0: READWRITE BYTE.
#define TRAP_RECEIVER_IP (3) // iso.3.6.1.4.1.17095.2.1.1.3.0: READWRITE IP_ADDRESS.
#define TRAP_COMMUNITY (4) // iso.3.6.1.4.1.17095.2.1.1.4.0: READWRITE ASCII_STRING.
#define OUT0 (5) // iso.3.6.1.4.1.17095.3.1.0: READWRITE BYTE.
#define OUT1 (6) // iso.3.6.1.4.1.17095.3.2.0: READWRITE BYTE.
#define OUT2 (7) // iso.3.6.1.4.1.17095.3.3.0: READWRITE BYTE.
#define OUT3 (8) // iso.3.6.1.4.1.17095.3.4.0: READWRITE BYTE.
#define OUT4 (9) // iso.3.6.1.4.1.17095.3.5.0: READWRITE BYTE.
#define ALL (90) // iso.3.6.1.4.1.17095.3.100.0: READONLY OCTET_STRING.
#define TEMP (10) // iso.3.6.1.4.1.17095.4.1.0: READONLY ASCII_STRING.
#define VCC (11) // iso.3.6.1.4.1.17095.4.2.0: READONLY ASCII_STRING.
#define INP1 (12) // iso.3.6.1.4.1.17095.4.3.0: READONLY ASCII_STRING.
#define INP2 (13) // iso.3.6.1.4.1.17095.4.4.0: READONLY ASCII_STRING.
#define INP3 (14) // iso.3.6.1.4.1.17095.4.5.0: READONLY ASCII_STRING.
#define INP4 (15) // iso.3.6.1.4.1.17095.4.6.0: READONLY ASCII_STRING.
#define INP5 (16) // iso.3.6.1.4.1.17095.4.7.0: READONLY ASCII_STRING.
#define INP6 (17) // iso.3.6.1.4.1.17095.5.1.0: READONLY ASCII_STRING.
#define INP7 (18) // iso.3.6.1.4.1.17095.5.2.0: READONLY ASCII_STRING.
#define INP8 (19) // iso.3.6.1.4.1.17095.5.3.0: READONLY ASCII_STRING.
#define INP9 (20) // iso.3.6.1.4.1.17095.5.4.0: READONLY ASCII_STRING.
#define INP10 (21) // iso.3.6.1.4.1.17095.5.5.0: READONLY ASCII_STRING.
#define INP11 (22) // iso.3.6.1.4.1.17095.5.6.0: READONLY ASCII_STRING.
#define DTH22_1 (23) // iso.3.6.1.4.1.17095.6.1.0: READONLY ASCII_STRING.
#define DTH22_2 (24) // iso.3.6.1.4.1.17095.6.2.0: READONLY ASCII_STRING.
#define I3XI5 (30) // iso.3.6.1.4.1.17095.7.1.0: READONLY ASCII_STRING.
#define PXT (31) // iso.3.6.1.4.1.17095.7.2.0: READONLY ASCII_STRING.
#define PINP4D (32) // iso.3.6.1.4.1.17095.7.3.0: READONLY ASCII_STRING.
#define PINP4D_24H (33) // iso.3.6.1.4.1.17095.7.4.0: READONLY ASCII_STRING.
#d e fin e I N P1D (41) // is o. 3. 6 .1.4.1.170 95.10.1. 0 : R E AD O N LY BY T E .
#define INP2D (42) // iso.3.6.1.4.1.17095.10.2.0: READONLY BYTE.
#define INP3D (43) // iso.3.6.1.4.1.17095.10.3.0: READONLY BYTE.
#define INP4D (44) // iso.3.6.1.4.1.17095.10.4.0: READONLY BYTE.
NUMBERS OID for SNMP
|
Tomas Chott chott@praha1.net |
Metropolitní sí» Praha 1 z.s.p.o. |
|