Hello Swen,
I have a couple MLX-8 MLX-16 running 5.4E and I don’t have this issue for Memory / cpu.
For your vlan issue, I can’t check it as our mlx are a full vpls fabric, so all the ports are seen in vlan1 ( even if the vpls vlan is 4 )
There is plenty of bugs on Broke -aid , the most stable version we have in production is this one.
5.4B is bugued on the lag( ask brocade about this internal ID : DEFECT000440912 ) , so the minimum version you have to use is 5.4C
Regarding the ICX, I tried them and … I removed them and I will forget them :)
Attached a capture of one MLX16.
This customer is running CE 0.13.10.4585
Raphael
Does no one have a glue on this?
cheers
Swen
Hi,
we use a couple of MLXe’s and ICX’s which seem fine at the first place running observium’s subscriber edition. However, a few part seems not working correctly:
+ MLXE’s
- Memory shown as -1 on the device main page and has no graphs „nan“ at all
- Memorypool usage graphs show -nan
- Observium recognizes the installed Line card CPU but report 100% CPU on another machine adder 3 month earlier it reports OK
- VLAN’s are reported fine, however, on the VLAN tab only untagged vlan1 (default vlan) has port associated with it, others are empt
+ ICX’s
- CPU reported 100% all time, but same switch installed earlier shows fine
- Compared to the MLXe it does not show LAG interfaces
Any hints on the the graphing which works for one device but another added later does not as well for the memory? I Don’t hink that observium suddenly broke the support for this, as it is still working for the other devices (exactly the same device).
What do I need to provide to help fixing the other things such as the LAG display for the ICX or others and to get more current Brocade device support?
Cheers,
Swen
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium