Argh, do useful walks 😃
-M mibs/rfc:mibs/ubiquiti -m ALL on the SNMP command from inside the Observium directory!
Adam.
From: Lyndon Labuschagne lyndonl@mobiletorque.co.za Sent: 25 April 2022 18:28 To: Observium observium@observium.org Cc: adama@observium.org Subject: Re: [Observium] Ubiquity Serial Numbers / Wireless (WLAN) mac
Hi Adam
There are various devices, Rocket M5, Powerbeam M5, Airfiber 5X and 5XHD as well as a number of AC versions and LTU radios
They all seem to show the MAC addresses under iso.3.6.1.2.1.2.2.1.6.4
snmpwalk -v1 -c "SNMPKEY" 172.22.69.10 iso.3.6.1.2.1.2.2.1.6.4
iso.3.6.1.2.1.2.2.1.6.4 = Hex-STRING: E0 63 DA BF 8F 56
E0 63 DA BF 8F 56 is the WLAN0 MAC Addr. Which is the Ubiquity Serial number, at least for the radios. I am not 100% sure is this it the correct field but testing over multiple radio versions it does seem to always show the correct MAC / Serial
Not sure if that helps you to help me at all?
From: observium <observium-bounces@observium.org mailto:observium-bounces@observium.org > on behalf of adama--- via observium <observium@observium.org mailto:observium@observium.org > Reply to: Observium <observium@observium.org mailto:observium@observium.org > Date: Monday, 25 April 2022 at 17:51 To: 'Observium' <observium@observium.org mailto:observium@observium.org > Cc: <adama@observium.org mailto:adama@observium.org > Subject: Re: [Observium] Ubiquity Serial Numbers / Wireless (WLAN) mac
We have a few OIDs to get serials from various bits of ubnt kit.
Where is it in SNMP on your devices? What are they?
Adam.
From: observium <observium-bounces@observium.org mailto:observium-bounces@observium.org > On Behalf Of Lyndon Labuschagne via observium Sent: 25 April 2022 16:10 To: observium@observium.org mailto:observium@observium.org Cc: Lyndon Labuschagne <lyndonl@mobiletorque.co.za mailto:lyndonl@mobiletorque.co.za > Subject: [Observium] Ubiquity Serial Numbers / Wireless (WLAN) mac
Hi
A few years ago we were able to pull the Ubiquiti Radio MAC / Serial numbers from the Observium DB.
I no longer see any serial numbers listed for Ubiquiti devices if I query the device table in the DB directly, and it’s not shown on the device screen in the Observium interface.
When running a manual poller.php run the serial number field is <empty>, Is there something that changed on the Observium or Ubiquiti side or is the a module that I may need to enable?
Any ideas or input would be welcome.
Regards
Lyndon
_______________________________________________ observium mailing list observium@observium.org mailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium