Dear Sir,

I Successfully install Observium at my office but i can not add my Device on Observium for monitoring . Here all are Cisco Device and I checked that snmpwalk is working.  I can ping my all cisco device by name when try to add by cli command and also from GUI but the given error message shown: Could not ping dhanmondi.

It may be mentioned here that, i checked everything as per this command: Usage (SNMPv1/2c): ./addhost.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6]  But still same error message shown.

I also check it :
 vi config.php and add the following part.
$config['fping'] = "/usr/sbin/fping";

but can not find fping file/folder to this location /usr/sbin .


Therefore you are requested to provide me instruction step by step for solving this problem. See the bellow message for your kind information.

root@Observium:/opt/observium# ping dhanmondi
PING dhanmondi.mblbd.com (192.168.102.2) 56(84) bytes of data.
64 bytes from dhanmondi.mblbd.com (192.168.102.2): icmp_req=1 ttl=252 time=1.87 ms
64 bytes from dhanmondi.mblbd.com (192.168.102.2): icmp_req=2 ttl=252 time=2.03 ms
64 bytes from dhanmondi.mblbd.com (192.168.102.2): icmp_req=3 ttl=252 time=1.96 ms
^C
--- dhanmondi.mblbd.com ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2003ms
rtt min/avg/max/mdev = 1.872/1.956/2.038/0.084 ms
root@Observium:/opt/observium#


root@Observium:/opt/observium# ./addhost.php dhanmondi (my snmp communicty)  v2c
Could not ping dhanmondi
Could not ping dhanmondi

Observium v0.13.6.4140
Add Host Tool

Usage (SNMPv1/2c): ./addhost.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6]
Usage (SNMPv3)   :  Config Defaults : ./addhost.php <hostname> any v3 [user] [port] [udp|udp6|tcp|tcp6]
                   No Auth, No Priv : ./addhost.php <hostname> nanp v3 [user] [port] [udp|udp6|tcp|tcp6]
                      Auth, No Priv : ./addhost.php <hostname> anp v3 <user> <password> [md5|sha] [port] [udp|udp6|tcp|tcp6]
                      Auth,    Priv : ./addhost.php <hostname> ap v3 <user> <password> <enckey> [md5|sha] [aes|dsa] [port] [ud           p|udp6|tcp|tcp6]
Remember to run discovery for the host afterwards.


root@Observium:/opt/observium#

Waiting for your quick  step by step instruction for solving my problem.





--
Thanks &

Warm Regards.

=============================
Engr. Md. Alihyder Bhuiyan
( B.Sc. Engg. in CSE, CCNA, MCSA )
Executive Officer (Networking)
IT Division, Head Office
Mercantile Bank Limited.
Level-7, Sun Moon Star Tower
37 Dilkusha C/A, Dhaka-1000
Tel   : +88 02 7113714, 7113717, 7110020, Ext: 517
Mob : +88 01191 001 606
         +88 01552 444 262
         +88 01611 001 606