On 21/02/2016 16:02:07, chott@praha1.net <chott@praha1.net> wrote:

Not yet

i have DOM info into Observium some time ago

SNMP trap from Switch working fine

SFF8472-5-THRESHOLD_VIOLATION : Gi1/0/12: Rx power high warning; Operating value: -4.7 dBm, Threshold value: -7.0 dBm.

i see now to Log and in time below there is last info from Observium

2015-03-25 12:44:28

Sensor added: dbm cisco-entity-sensor 1248 GigabitEthernet1/0/12 Receive Power

Probably after update SVN Observium doesnt show this info

Tom

Tomas Chott technický ředitel chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135	Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net

---

Od: observium [observium-bounces@observium.org] za uživatele Adam Armstrong [adama@memetic.org]
Odesláno: 21. února 2016 16:57
Komu: observium@observium.org
Předmět: Re: [Observium] Cisco SB SFP DOM/DDM monitoring

Your device is at fault. This is not something we should be expected to spend time on.

adam.

On 21/02/2016 15:49:48, chott@praha1.net <chott@praha1.net> wrote:

Can you help we what i can do in SNMPWALK ?

Tomas Chott technický ředitel chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135	Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net

---

Od: observium [observium-bounces@observium.org] za uživatele Adam Armstrong [adama@memetic.org]
Odesláno: 21. února 2016 16:30
Komu: observium@observium.org
Předmět: Re: [Observium] Cisco SB SFP DOM/DDM monitoring

You need to verify that your device is exposing these values in SNMP before we can do anything.

adam.

On 21/02/2016 14:55:03, chott@praha1.net <chott@praha1.net> wrote:

Hello Mike,

Cisco SB now works fine for SFPs DOM

but still have problem with Cisco IOS device 2960/3750

i have one LAB 3750G-12S-E, from CLI i have result for SFP but nothing in Observium


mA: milliamperes, dBm: decibels (milliwatts), NA or N/A: not applicable.
++ : high alarm, +  : high warning, -  : low warning, -- : low alarm.
A2D readouts (if they differ), are reported in parentheses.
The threshold values are calibrated.

                              High Alarm  High Warn  Low Warn   Low Alarm
          Temperature         Threshold   Threshold  Threshold  Threshold
Port       (Celsius)          (Celsius)   (Celsius)  (Celsius)  (Celsius)
--------- ------------------  ----------  ---------  ---------  ---------
Gi1/0/12    56.8                90.0        85.0         0.0       -4.0

                              High Alarm  High Warn  Low Warn   Low Alarm
           Voltage            Threshold   Threshold  Threshold  Threshold
Port       (Volts)            (Volts)     (Volts)    (Volts)    (Volts)
---------  ---------------    ----------  ---------  ---------  ---------
Gi1/0/12   3.34                  3.60        3.50        3.10       3.00

           Optical            High Alarm  High Warn  Low Warn   Low Alarm
           Transmit Power     Threshold   Threshold  Threshold  Threshold
Port       (dBm)              (dBm)       (dBm)      (dBm)      (dBm)
---------  -----------------  ----------  ---------  ---------  ---------
Gi1/0/12     2.9                 8.1         5.0         0.0       -4.0

           Optical            High Alarm  High Warn  Low Warn   Low Alarm
           Receive Power      Threshold   Threshold  Threshold  Threshold
Port       (dBm)              (dBm)       (dBm)      (dBm)      (dBm)
-------    -----------------  ----------  ---------  ---------  ---------
Gi1/0/12    -4.7         +      -3.0        -7.0       -28.2      -33.0

Tomas Chott technický ředitel chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135	Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net

---

Od: observium [observium-bounces@observium.org] za uživatele Mike Stupalov [mike@observium.org]
Odesláno: 20. února 2016 10:39
Komu: Observium Network Observation System
Předmět: Re: [Observium] Cisco SB SFP DOM/DDM monitoring

Try with r7622.

On 19.02.16 17:38, chott@praha1.net wrote:

here we go

CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCableLength = INTEGER: 1

CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCableChannel1 = INTEGER: 1

CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCableChannel2 = INTEGER: 1

CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCableChannel3 = INTEGER: 1

CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCableChannel4 = INTEGER: 1

CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCablePolarity1 = INTEGER: 0

CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCablePolarity2 = INTEGER: 0

CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCablePolarity3 = INTEGER: 0

CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCablePolarity4 = INTEGER: 0

CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCablePairSkew1 = INTEGER: 8

CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCablePairSkew2 = INTEGER: 0

CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCablePairSkew3 = INTEGER: 8

CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCablePairSkew4 = INTEGER: 8

CISCOSB-PHY-MIB::rlPhyTestGetResult.57.rlPhyTestTableTransceiverTemp = INTEGER:                                                                                      46

CISCOSB-PHY-MIB::rlPhyTestGetResult.57.rlPhyTestTableTransceiverSupply = INTEGER                                                                                     : 3209300

CISCOSB-PHY-MIB::rlPhyTestGetResult.57.rlPhyTestTableTxBias = INTEGER: 6191

CISCOSB-PHY-MIB::rlPhyTestGetResult.57.rlPhyTestTableTxOutput = INTEGER: -6809

CISCOSB-PHY-MIB::rlPhyTestGetResult.57.rlPhyTestTableRxOpticalPower = INTEGER: -                                                                                     9630

CISCOSB-PHY-MIB::rlPhyTestGetResult.57.rlPhyTestTableDataReady = INTEGER: 0

CISCOSB-PHY-MIB::rlPhyTestGetResult.57.rlPhyTestTableLOS = INTEGER: 0

CISCOSB-PHY-MIB::rlPhyTestGetResult.57.rlPhyTestTableTxFault = INTEGER: 0

Tomas Chott technický ředitel chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135	Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net

---

Od: observium [observium-bounces@observium.org] za uživatele Mike Stupalov [mike@observium.org]
Odesláno: 19. února 2016 15:02
Komu: Observium Network Observation System
Předmět: Re: [Observium] Cisco SB SFP DOM/DDM monitoring

Hi,

On 19.02.16 14:58, chott@praha1.net wrote:

Hello, team

any news? I can share switch 

Tom

Tomas Chott technický ředitel chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135	Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net

---

Od: chott@praha1.net
Odesláno: 18. února 2016 18:59
Komu: observium@observium.org
Předmět: Cisco SB SFP DOM/DDM monitoring

Hello team,

today i find OID for SFP monitoring in Cisco SB

in this case there is OID and CLI info from CISCO SG300-10 switch and SFP in slot GI9 with DOM support

can you add to Observium ? like Catalyst switches?

Only in CLI there is mW for Power in SNMPwalk there is dBm but same value dBm is right value for DOM monitoring

iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.5 = INTEGER: 47

iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.6 = INTEGER: 3211700

iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.7 = INTEGER: 6289

iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.8 = INTEGER: -6809

iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.9 = INTEGER: -9626

iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.10 = INTEGER: 0

iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.11 = INTEGER: 0

iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.12 = INTEGER: 0

Hrm, show snmpwalk as:

snmpwalk -v2c -c <community> -m CISCOSB-PHY-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp:/opt/observium/mibs/ciscosb <your_device> rlPhyTestGetResult

   Port      Temp  Voltage Current Output  Input   LOS

             [C]   [Volt]  [mA]    Power   Power

                                   [mWatt] [mWatt]

----------- ------ ------- ------- ------- ------- ---

    gi1     Copper

    gi2     Copper

    gi3     Copper

    gi4     Copper

    gi5     Copper

    gi6     Copper

    gi7     Copper

    gi8     Copper

    gi9       47    3.20    6.28    0.20    0.10   No

   gi10      N/A     N/A     N/A     N/A     N/A   N/A

 Temp         - Internally measured transceiver temperature

 Voltage      - Internally measured supply voltage

 Current      - Measured TX bias current

 Output Power - Measured TX output power in milliWatts

 Input Power  - Measured RX received power in milliWatts

 LOS          - Loss of signal

 N/A - Not Available, N/S - Not Supported, W - Warning, E - Error

Tom

Tomas Chott technický ředitel chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135	Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net

_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

-- 
Mike Stupalov
http://observium.org

_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

-- 
Mike Stupalov
http://observium.org