Note:
No changes in IOS 3y ago....
[email-header-praha1]
Tomas Chott technický ředitel chott@praha1.netmailto:chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135
Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.nethttp://www.praha1.net [Popis: Facebook]http://www.facebook.com/praha1net http://www.linkedin.com/pub/tomas-chott/49/97a/1aa
________________________________ Od: observium [observium-bounces@observium.org] za uživatele chott@praha1.net [chott@praha1.net] Odesláno: 21. února 2016 17:08 Komu: Observium Network Observation System Předmět: Re: [Observium] Cisco SB SFP DOM/DDM monitoring
Hi Adam
no update 209days
no changes in SFP
OK, i must find OID for gi1/0/12 and get data from SNMPWALK
[email-header-praha1]
Tomas Chott technický ředitel chott@praha1.netmailto:chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135
Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.nethttp://www.praha1.net [Popis: Facebook]http://www.facebook.com/praha1net http://www.linkedin.com/pub/tomas-chott/49/97a/1aa
________________________________ Od: observium [observium-bounces@observium.org] za uživatele Adam Armstrong [adama@memetic.org] Odesláno: 21. února 2016 17:04 Komu: observium@observium.org Předmět: Re: [Observium] Cisco SB SFP DOM/DDM monitoring
Probably after IOS update your device stopped exposing this data correctly in SNMP.
adam.
On 21/02/2016 16:02:07, chott@praha1.net chott@praha1.net wrote:
Not yet
i have DOM info into Observium some time ago
SNMP trap from Switch working fine
SFF8472-5-THRESHOLD_VIOLATION : Gi1/0/12: Rx power high warning; Operating value: -4.7 dBm, Threshold value: -7.0 dBm.
i see now to Log and in time below there is last info from Observium
2015-03-25 12:44:28 Sensor added: dbm cisco-entity-sensor 1248 GigabitEthernet1/0/12 Receive Power
Probably after update SVN Observium doesnt show this info
Tom
[email-header-praha1]
Tomas Chott technický ředitel chott@praha1.netmailto:chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135
Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.nethttp://www.praha1.net [Popis: Facebook]http://www.facebook.com/praha1net http://www.linkedin.com/pub/tomas-chott/49/97a/1aa
________________________________ Od: observium [observium-bounces@observium.org] za uživatele Adam Armstrong [adama@memetic.org] Odesláno: 21. února 2016 16:57 Komu: observium@observium.org Předmět: Re: [Observium] Cisco SB SFP DOM/DDM monitoring
Your device is at fault. This is not something we should be expected to spend time on.
adam.
On 21/02/2016 15:49:48, chott@praha1.net chott@praha1.net wrote:
Can you help we what i can do in SNMPWALK ?
[email-header-praha1]
Tomas Chott technický ředitel chott@praha1.netmailto:chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135
Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.nethttp://www.praha1.net [Popis: Facebook]http://www.facebook.com/praha1net http://www.linkedin.com/pub/tomas-chott/49/97a/1aa
________________________________ Od: observium [observium-bounces@observium.org] za uživatele Adam Armstrong [adama@memetic.org] Odesláno: 21. února 2016 16:30 Komu: observium@observium.org Předmět: Re: [Observium] Cisco SB SFP DOM/DDM monitoring
You need to verify that your device is exposing these values in SNMP before we can do anything.
adam.
On 21/02/2016 14:55:03, chott@praha1.net chott@praha1.net wrote:
Hello Mike,
Cisco SB now works fine for SFPs DOM
but still have problem with Cisco IOS device 2960/3750
i have one LAB 3750G-12S-E, from CLI i have result for SFP but nothing in Observium
mA: milliamperes, dBm: decibels (milliwatts), NA or N/A: not applicable. ++ : high alarm, + : high warning, - : low warning, -- : low alarm. A2D readouts (if they differ), are reported in parentheses. The threshold values are calibrated.
High Alarm High Warn Low Warn Low Alarm Temperature Threshold Threshold Threshold Threshold Port (Celsius) (Celsius) (Celsius) (Celsius) (Celsius) --------- ------------------ ---------- --------- --------- --------- Gi1/0/12 56.8 90.0 85.0 0.0 -4.0
High Alarm High Warn Low Warn Low Alarm Voltage Threshold Threshold Threshold Threshold Port (Volts) (Volts) (Volts) (Volts) (Volts) --------- --------------- ---------- --------- --------- --------- Gi1/0/12 3.34 3.60 3.50 3.10 3.00
Optical High Alarm High Warn Low Warn Low Alarm Transmit Power Threshold Threshold Threshold Threshold Port (dBm) (dBm) (dBm) (dBm) (dBm) --------- ----------------- ---------- --------- --------- --------- Gi1/0/12 2.9 8.1 5.0 0.0 -4.0
Optical High Alarm High Warn Low Warn Low Alarm Receive Power Threshold Threshold Threshold Threshold Port (dBm) (dBm) (dBm) (dBm) (dBm) ------- ----------------- ---------- --------- --------- --------- Gi1/0/12 -4.7 + -3.0 -7.0 -28.2 -33.0
[email-header-praha1]
Tomas Chott technický ředitel chott@praha1.netmailto:chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135
Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.nethttp://www.praha1.net [Popis: Facebook]http://www.facebook.com/praha1net http://www.linkedin.com/pub/tomas-chott/49/97a/1aa
________________________________ Od: observium [observium-bounces@observium.org] za uživatele Mike Stupalov [mike@observium.org] Odesláno: 20. února 2016 10:39 Komu: Observium Network Observation System Předmět: Re: [Observium] Cisco SB SFP DOM/DDM monitoring
Try with r7622.
On 19.02.16 17:38, chott@praha1.netmailto:chott@praha1.net wrote: here we go
CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCableLength = INTEGER: 1 CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCableChannel1 = INTEGER: 1 CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCableChannel2 = INTEGER: 1 CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCableChannel3 = INTEGER: 1 CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCableChannel4 = INTEGER: 1 CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCablePolarity1 = INTEGER: 0 CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCablePolarity2 = INTEGER: 0 CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCablePolarity3 = INTEGER: 0 CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCablePolarity4 = INTEGER: 0 CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCablePairSkew1 = INTEGER: 8 CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCablePairSkew2 = INTEGER: 0 CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCablePairSkew3 = INTEGER: 8 CISCOSB-PHY-MIB::rlPhyTestGetResult.56.rlPhyTestTableCablePairSkew4 = INTEGER: 8 CISCOSB-PHY-MIB::rlPhyTestGetResult.57.rlPhyTestTableTransceiverTemp = INTEGER: 46 CISCOSB-PHY-MIB::rlPhyTestGetResult.57.rlPhyTestTableTransceiverSupply = INTEGER : 3209300 CISCOSB-PHY-MIB::rlPhyTestGetResult.57.rlPhyTestTableTxBias = INTEGER: 6191 CISCOSB-PHY-MIB::rlPhyTestGetResult.57.rlPhyTestTableTxOutput = INTEGER: -6809 CISCOSB-PHY-MIB::rlPhyTestGetResult.57.rlPhyTestTableRxOpticalPower = INTEGER: - 9630 CISCOSB-PHY-MIB::rlPhyTestGetResult.57.rlPhyTestTableDataReady = INTEGER: 0 CISCOSB-PHY-MIB::rlPhyTestGetResult.57.rlPhyTestTableLOS = INTEGER: 0 CISCOSB-PHY-MIB::rlPhyTestGetResult.57.rlPhyTestTableTxFault = INTEGER: 0
[email-header-praha1]
Tomas Chott technický ředitel chott@praha1.netmailto:chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135
Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.nethttp://www.praha1.net [Popis: Facebook]http://www.facebook.com/praha1net http://www.linkedin.com/pub/tomas-chott/49/97a/1aa
________________________________ Od: observium [observium-bounces@observium.orgmailto:observium-bounces@observium.org] za uživatele Mike Stupalov [mike@observium.orgmailto:mike@observium.org] Odesláno: 19. února 2016 15:02 Komu: Observium Network Observation System Předmět: Re: [Observium] Cisco SB SFP DOM/DDM monitoring
Hi,
On 19.02.16 14:58, chott@praha1.netmailto:chott@praha1.net wrote: Hello, team
any news? I can share switch
Tom
[email-header-praha1]
Tomas Chott technický ředitel mailto:chott@praha1.netchott@praha1.netmailto:chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135
Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic http://www.praha1.netwww.praha1.nethttp://www.praha1.net [Popis: Facebook]http://www.facebook.com/praha1net http://www.linkedin.com/pub/tomas-chott/49/97a/1aa
________________________________ Od: chott@praha1.netmailto:chott@praha1.net Odesláno: 18. února 2016 18:59 Komu: observium@observium.orgmailto:observium@observium.org Předmět: Cisco SB SFP DOM/DDM monitoring
Hello team,
today i find OID for SFP monitoring in Cisco SB
in this case there is OID and CLI info from CISCO SG300-10 switch and SFP in slot GI9 with DOM support
can you add to Observium ? like Catalyst switches?
Only in CLI there is mW for Power in SNMPwalk there is dBm but same value dBm is right value for DOM monitoring
iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.5 = INTEGER: 47 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.6 = INTEGER: 3211700 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.7 = INTEGER: 6289 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.8 = INTEGER: -6809 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.9 = INTEGER: -9626 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.10 = INTEGER: 0 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.11 = INTEGER: 0 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.12 = INTEGER: 0 Hrm, show snmpwalk as:
snmpwalk -v2c -c <community> -m CISCOSB-PHY-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp:/opt/observium/mibs/ciscosb <your_device> rlPhyTestGetResult
Port Temp Voltage Current Output Input LOS [C] [Volt] [mA] Power Power [mWatt] [mWatt] ----------- ------ ------- ------- ------- ------- --- gi1 Copper gi2 Copper gi3 Copper gi4 Copper gi5 Copper gi6 Copper gi7 Copper gi8 Copper gi9 47 3.20 6.28 0.20 0.10 No gi10 N/A N/A N/A N/A N/A N/A
Temp - Internally measured transceiver temperature Voltage - Internally measured supply voltage Current - Measured TX bias current Output Power - Measured TX output power in milliWatts Input Power - Measured RX received power in milliWatts LOS - Loss of signal N/A - Not Available, N/S - Not Supported, W - Warning, E - Error
Tom
[email-header-praha1]
Tomas Chott technický ředitel mailto:chott@praha1.netchott@praha1.netmailto:chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135
Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic http://www.praha1.netwww.praha1.nethttp://www.praha1.net [Popis: Facebook]http://www.facebook.com/praha1net http://www.linkedin.com/pub/tomas-chott/49/97a/1aa
_______________________________________________ observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalov http://observium.org
_______________________________________________ observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalov http://observium.org