Yup that seems to be correct. Configured the host to be snmpv1 instead (for which snmpbulkwalk does not work) and now the ports are detected.
root@mistik:/opt/observium# ./discovery.php -h 3
<snip>
Ports : (1)[6] (2)[7] (3)[8] (4)[9] (5)[10] (6)[11] (7)[12] (8)[13] (9)[14] (10)[15] (11)[16] (12)[17] (13)[18] (14)[19] (15)[20] (16)[21] (604)[22]
Module [ ports ] time: 2.1203s
Would be nice if Observium could deal with these (old/broken) devices that does not support snmpbulkwalk and fallback to snmpwalk. Anywho, my problem is gone so thanks for the pointer!
Rgds//Thomas
On Mon, Mar 30, 2015 at 8:54 PM, Adam Armstrong adama@memetic.org wrote:
Looks like that braindead switch doesn't like bulkwalk.
adam.
On 2015-03-30 19:50, Thomas Novin wrote:
Hello
Very new to Observium, installed it yesteday. Ran into problems on the first device I added, no ports are found on this switch. I am also using Cacti which I plan to replace and there all ports are discovered and graphing works fine.
Here is an output from snmpwalk:
http://paste.ubuntu.com/10708460/ [1]
Here is an output from poller in debug:
http://paste.ubuntu.com/10708471/ [2]
And last output from discovery..
root@mistik:/opt/observium# ./discovery.php -h 3
Observium CE 0.14.11.6000
DISCOVERY
Current Revision : 6000
New Revision : 6350
dlink.xyz.lan 3 dlink
Module [ os ] time: 0.0703s
Ports :
Module [ ports ] time: 24.0653s
Port Stacks:
Module [ ports-stack ] time: 6.0483s
Processors : AGENT-GENERAL-MIB hrDevice:
Module [ processors ] time: 12.0521s
Memory : AGENT-GENERAL-MIB HOST-RESOURCES-MIB
Module [ mempools ] time: 12.0383s
IPv4 Addresses :
Module [ ipv4-addresses ] time: 36.1278s
IPv6 Addresses :
Module [ ipv6-addresses ] time: 30.0945s
Sensors: ENTITY-SENSOR-MIB
Module [ sensors ] time: 42.1179s
Storage :
Module [ storage ] time: 6.0196s
Inventory: Physical Inventory :
hrDevice :
Module [ inventory ] time: 24.1358s
Discovery protocols: LLDP-MIB CISCO-CDP-MIB
Module [ discovery-protocols ] time: 12.0836s
OSPF Neighbours:
Module [ ospf-autodiscovery ] time: 6.0253s
ARP/NDP Tables :
Module [ arp-table ] time: 18.0719s
Module [ junose-atm-vp ] time: 0.0003s
BGP Sessions: No BGP on host
Module [ bgp-peers ] time: 0.015s
VLANs:
Q-BRIDGE-MIB
Module [ vlans ] time: 6.0383s
Module [ mac-accounting ] time: 0.0003s
Module [ cisco-pw ] time: 0.0004s
Module [ cisco-vrf ] time: 0.0005s
Module [ cisco-sla ] time: 0.0004s
Module [ vmware-vminfo ] time: 0.0003s
Cisco Class-based QoS: QoS not configured.
Module [ cisco-cbqos ] time: 6.0876s
Module [ libvirt-vminfo ] time: 0.0005s
Module [ toner ] time: 0.0005s
UCD Disk IO :
Module [ ucd-diskio ] time: 6.0147s
Wifi:
Module [ wifi ] time: 0.0005s
Module [ graphs ] time: 0.0004s
Discovered in 247.1 seconds
MySQL: Cell[22/0s] Row[0/0s] Rows[49/0.01s] Column[0/0s] Update[1/0.01s] Insert[2/0.01s] Delete[0/0s]
Anyone knows what to do to graph the ports on this switch?
Rgds//Thomas
Links:
[1] http://paste.ubuntu.com/10708460/ [2] http://paste.ubuntu.com/10708471/
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium