The answer is in the CLI output when you tried adding the device there.
==== # ./add_device.php jr01 home v2c 161 udp Observium CE 18.9.9420 Add Device(s)
Try to add jr01: Trying v2c community *** [0] ... No reply on given community *** using v2c. Could not reach jr01 with given SNMP parameters using v2c. Devices failed: 1. ====
Your device is not answering your SNMP queries. I'd start by checking the following:
- wrong community string - wrong dns/hosts entry - snmpd on the target not listening/bound correctly for remote v2c queries - local firewall on target device
Cheers,
Michael
On 8 Sep 2018, at 1:17 pm, Michael michael@smarsz.com wrote:
The answer is in the CLI output when you tried adding the device there.
==== # ./add_device.php jr01 home v2c 161 udp Observium CE 18.9.9420 Add Device(s)
Try to add jr01: Trying v2c community *** [0] ... No reply on given community *** using v2c. Could not reach jr01 with given SNMP parameters using v2c. Devices failed: 1. ====
Your device is not answering your SNMP queries. I'd start by checking the following:
- wrong community string
- wrong dns/hosts entry
- snmpd on the target not listening/bound correctly for remote v2c queries
- local firewall on target device
Cheers,
Michael
On 8 Sep 2018, at 10:42 am, Adam Armstrong adama@memetic.org wrote:
No, I mean that poller run was pointless because how are you going to poll something which isn't even in observium?
Adam.
Sent from BlueMail On 8 Sep 2018, at 01:01, Roland Hill roland.lists@hillnet.co.nz wrote: On Fri, 07 Sep 2018 or thereabouts, Adam Armstrong came forth with:
You do not have any devices in the database called "jr01".
I deleted jr01 yesterday thinking that re-adding it might magically fix whatever the issue is.
jr01 exists, can be founf on the network and has snmp running.
==== # fping jr01 jr01 is alive
# systemctl status snmpd ● snmpd.service - Simple Network Management Protocol (SNMP) Daemon. Loaded: loaded (/lib/systemd/system/snmpd.service; enabled; vendor preset: enabled) Active: active (running) since Fri 2018-09-07 17:59:00 NZST; 17h ago Process: 1118 ExecStartPre=/bin/mkdir -p /var/run/agentx (code=exited, status=0/SUCCESS) Main PID: 1121 (snmpd) Tasks: 1 (limit: 4915) CGroup: /system.slice/snmpd.service └─1121 /usr/sbin/snmpd -Lsd -Lf /dev/null -u Debian-snmp -g Debian-snmp -I -smux mteTrigger mteTriggerConf -f
# ps aux | grep snmpd Debian-+ 1121 0.0 0.1 65024 11364 ? Ss Sep07 0:44 /usr/sbin/snmpd -Lsd -Lf /dev/null -u Debian-snmp -g Debian-snmp -I -smux mteTrigger mteTriggerConf -f
====
Adding the device jr01 from the command line fails:
==== # ./add_device.php jr01 home v2c 161 udp Observium CE 18.9.9420 Add Device(s)
Try to add jr01: Trying v2c community *** [0] ... No reply on given community *** using v2c. Could not reach jr01 with given SNMP parameters using v2c. Devices failed: 1. ====
I'm out of idea's but will go back to first principles and walk the install guide again just in case I have overlooked anything. jr01 has previously been discovered okay, but maybe I changed something and don't remember.
I appreciate your help Adam. _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium