Hi,

I have kind of the same problem, but this time with Cisco ASR routers. As you can see below.

I included the poller debug outputs.

The correct output (from a Cisco IOS router):

bgpPeerLocalAddr

bgpPeerLocalAddr.149.14.34.41 = 149.14.34.42

bgpPeerLocalAddr.172.30.253.3 = 172.30.253.66

bgpPeerLocalAddr.172.30.253.4 = 172.30.253.66

The wrong output (from a Cisco ASR router):

cbgpPeer2LocalAddr

cbgpPeer2LocalAddr.20." ..|(..........." = "20 01 06 7C 28 D4 00 00 00 00 00 00 00 00 00 03 "

cbgpPeer2LocalAddr.20." ..|(..........." = "20 01 06 7C 28 D4 00 00 00 00 00 00 00 00 00 03 "

cbgpPeer2LocalAddr.20." ..|(..........3" = "20 01 06 7C 28 D4 00 00 00 00 00 00 00 00 00 03 "

cbgpPeer2LocalAddr.20." ..|(..........4" = "20 01 06 7C 28 D4 00 00 00 00 00 00 00 00 00 03 "

cbgpPeer2LocalAddr.20." ..|(..........e" = "20 01 06 7C 28 D4 00 00 00 00 00 00 00 00 00 03 "

cbgpPeer2LocalAddr.20." ..|(..........f" = "20 01 06 7C 28 D4 00 00 00 00 00 00 00 00 00 03 "

cbgpPeer2LocalAddr.20." ..|(..........g" = "20 01 06 7C 28 D4 00 00 00 00 00 00 00 00 00 03 "

cbgpPeer2LocalAddr.ipv4."172.30.253.1" = "AC 1E FD 03 "

cbgpPeer2LocalAddr.ipv4."172.30.253.4" = "AC 1E FD 03 "

cbgpPeer2LocalAddr.ipv4."172.30.253.33" = "AC 1E FD 03 "

cbgpPeer2LocalAddr.ipv4."172.30.253.34" = "AC 1E FD 03 "

cbgpPeer2LocalAddr.ipv4."172.30.253.65" = "AC 1E FD 03 "

cbgpPeer2LocalAddr.ipv4."172.30.253.66" = "AC 1E FD 03 "

cbgpPeer2LocalAddr.ipv4."172.30.253.67" = "AC 1E FD 03 "

It looks like Observium is showing the first output correct, but not the second. Can this be fixed someway?

Regards,

Bastiaan

From: Tom Paseka [mailto:tom+lists@cloudflare.com]
Sent: vrijdag 18 oktober 2013 22:47
To: Mike Stupalov
Cc: Observium Network Observation System
Subject: Re: [Observium] Random Unicode Characters in BGP Polling / hex2ip

Resolution:

# echo $LANG

en_GB

# export LANG=en_GB.UTF-8

On Fri, Oct 18, 2013 at 12:40 AM, Mike Stupalov <landy2005@gmail.com> wrote:

On 18.10.2013 10:24, Tom Paseka wrote:
> Looks like a bug in snmp on the box - a raw snmpget shows the same
> weirdness.
>
> Sorry for noise!

Anyway, please send an output for debug poller/discovery.

Also note that you need to do snmpget with option -On,
because net-snmp default tries to translate hex data into string..

>
>
> On Thu, Oct 17, 2013 at 11:09 PM, Mike Stupalov <landy2005@gmail.com

> <mailto:landy2005@gmail.com>> wrote:
>
>     Please pastebin (on send file) for debug polling out:
>     php ./poller.php -d -m bgp-peers -h <your_juniper> > /tmp/poller.out
>
>     also for discovery (if possible):
>     php ./discovery.php -d -m bgp-peers -h <your_juniper> >
>     /tmp/discovery.out
>
>     --
>     Mike Stupalov
>

>     Tom Paseka __ 18 октября 2013 г. 5:31:10 написал:

>
>>     <snip>
>>         [jnxBgpM2PeerRemoteAddr] => � |�
>>         [jnxBgpM2PeerLocalAddr] => � }<
>>     <snip>
>>
>>     Is this well known?
>
>

--
Mike Stupalov