[Observium] Re: TBOX - SNMP line not have index part"

11 Feb 2025


      I just look at the changelog and get 'snmp_flags' => OBS_SNMP_ALL_NOINDEX
It works perfectly.
Thank you.
Thomas BONNEAU
________________________________
De : Bonneau Thomas via observium observium@lists.observium.org
Envoyé : dimanche 9 février 2025 15:44
À : observium@lists.observium.org observium@lists.observium.org
Cc : Bonneau Thomas thomas.bonneau@prestataires.lumiere.fr
Objet : [Observium] TBOX - SNMP line not have index part"
Hello,
I try to add a new os and a new mib in my Observium.
The device is a TBOX from Ovarro.
The device is old so the bulk mode does not work.
I managed to add custom OID.
I managed to get metadata but sensors and status do not work because ". SNMP line 'prgrun = 1' not have index part"
Is there a way to make it work?
$os = "semaphore-tbox-os";
$config['os'][$os]['sysObjectID'][]                 = ".1.3.6.1.4.1.27982";
$config['os'][$os]['sysDescr'][]                    = "Configuration Energie-Annexes";
$config['os'][$os]['snmp']['nobulk']                = TRUE;
$config['os'][$os]['snmp']['max-rep']               = 0;
$config['os'][$os]['type']                          = "power";
$config['os_group'][$os_group]['mib_blacklist']     = $config['os_group']['default']['mibs'];
$config['os'][$os]['mibs'][]                 = "SEMAPHORE-RTU-MIB";
$mib = 'SEMAPHORE-RTU-MIB';
$config['mibs'][$mib]['enable'] = 1;
$config['mibs'][$mib]['mib_dir'] = 'semaphore';
$config['mibs'][$mib]['identity_num'] = '.1.3.6.1.4.1.27982';
$config['mibs'][$mib]['descr'] = 'Semaphore RTU MIB.';
$config['mibs'][$mib]['sysname'][] = array('oid' => '.1.3.6.1.4.1.27982.1.7.2.23.0');
$config['mibs'][$mib]['version'][] = array('oid' => '.1.3.6.1.4.1.27982.1.7.2.26.0');
$config['mibs'][$mib]['sysdescr'][] = array('oid' => '.1.3.6.1.4.1.27982.1.7.2.23.0');
$config['mibs'][$mib]['syslocation'][] = array('oid' => '.1.3.6.1.4.1.27982.1.7.2.24.0');
$config['mibs'][$mib]['sensor'][] = array('oid' => 'prgrun',
                                          'class' => 'gauge',
                                          'descr' => 'prgrun',
                                          'oid_num' => '.1.3.6.1.4.1.27982.1.7.1.28161');
$config['mibs'][$mib]['status'][] = array(
                                          'oid_num' => '.1.3.6.1.4.1.27982.1.7.1.20519',
                                          'oid'       => 'presbat',
                                          'descr'     => 'presbat',
                                          'measured'  => 'presbat',
                                          'type'      => '0ok');
$type = '0ok';
$config['mibs'][$mib]['states'][$type][0] = array('name' => '0', 'event' => 'ok');
$config['mibs'][$mib]['states'][$type][1] = array('name' => '1', 'event' => 'alert');
The debug :
] prgrun [
CMD[/usr/bin/snmptranslate -On -Pu -m SEMAPHORE-RTU-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp:/opt/observium/mibs/semaphore 'SEMAPHORE-RTU-MIB::prgrun']
CMD EXITCODE[0]
CMD RUNTIME[0.0094s]
STDOUT[
.1.3.6.1.4.1.27982.1.7.1.28161
]
SNMP TRANSLATE (CMD): 'SEMAPHORE-RTU-MIB::prgrun' -> '.1.3.6.1.4.1.27982.1.7.1.28161'
OS-specific no-bulk definition.
CMD[/usr/bin/snmpwalk -v2c -c *** -Pud -Ih -OQUsb -m SEMAPHORE-RTU-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp:/opt/observium/mibs/semaphore 'udp':'fth-arch-tbox01-yvfi':'161' prgrun]
CMD EXITCODE[0]
CMD RUNTIME[0.0153s]
STDOUT[
prgrun = 1
]
SNMP STATUS[TRUE]
Warning. SNMP line 'prgrun = 1' not have index part
]
 o SEMAPHORE-RTU-MIB    presbat [OS-specific no-bulk definition.
CMD[/usr/bin/snmpwalk -v2c -c *** -Pud -Ih -OQUsb -m SEMAPHORE-RTU-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp:/opt/observium/mibs/semaphore 'udp':'fth-arch-tbox01-yvfi':'161' presbat]
CMD EXITCODE[0]
CMD RUNTIME[0.0146s]
STDOUT[
presbat = 0
]
SNMP STATUS[TRUE]
Warning. SNMP line 'presbat = 0' not have index part
] disjdepartbt [OS-specific no-bulk definition.
CMD[/usr/bin/snmpwalk -v2c -c *** -Pud -Ih -OQUsb -m SEMAPHORE-RTU-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp:/opt/observium/mibs/semaphore 'udp':'fth-arch-tbox01-yvfi':'161' disjdepartbt]
CMD EXITCODE[0]
CMD RUNTIME[0.0144s]
STDOUT[
disjdepartbt = 0
]
SNMP STATUS[TRUE]
Warning. SNMP line 'disjdepartbt = 0' not have index part
]
Thanks in advance.
Thomas