![](https://secure.gravatar.com/avatar/3bbbd945c333b8013d0dfa23058f65b9.jpg?s=120&d=mm&r=g)
Hi,
On 19.02.16 14:58, chott@praha1.net wrote:
Hello, team
any news? I can share switch
Tom
email-header-praha1
*Tomas Chott technický ředitel***
chott@praha1.net mailto:chott@praha1.net* *Phone:*+420 245 004 005 *Mobile:*+420 733 123 135***
*Metropolitní síť Praha 1 z.s.p.o.* Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net http://www.praha1.net
Popis: Facebook http://www.facebook.com/praha1nethttp://www.linkedin.com/pub/tomas-chott/49/97a/1aa
*Od:* chott@praha1.net *Odesláno:* 18. února 2016 18:59 *Komu:* observium@observium.org *Předmět:* Cisco SB SFP DOM/DDM monitoring
Hello team,
today i find OID for SFP monitoring in Cisco SB
in this case there is OID and CLI info from CISCO SG300-10 switch and SFP in slot GI9 with DOM support
can you add to Observium ? like Catalyst switches?
Only in CLI there is mW for Power in SNMPwalk there is dBm but same value dBm is right value for DOM monitoring
iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.5 = INTEGER: 47 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.6 = INTEGER: 3211700 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.7 = INTEGER: 6289 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.8 = INTEGER: -6809 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.9 = INTEGER: -9626 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.10 = INTEGER: 0 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.11 = INTEGER: 0 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.12 = INTEGER: 0
Hrm, show snmpwalk as:
snmpwalk -v2c -c <community> -m CISCOSB-PHY-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp:/opt/observium/mibs/ciscosb <your_device> rlPhyTestGetResult
Port Temp Voltage Current Output Input LOS [C] [Volt] [mA] Power Power [mWatt] [mWatt]
gi1 Copper gi2 Copper gi3 Copper gi4 Copper gi5 Copper gi6 Copper gi7 Copper gi8 Copper gi9 47 3.20 6.28 0.20 0.10 No
gi10 N/A N/A N/A N/A N/A N/A
Temp - Internally measured transceiver temperature Voltage - Internally measured supply voltage Current - Measured TX bias current Output Power - Measured TX output power in milliWatts Input Power - Measured RX received power in milliWatts LOS - Loss of signal N/A - Not Available, N/S - Not Supported, W - Warning, E - Error
Tom
email-header-praha1
*Tomas Chott technický ředitel***
chott@praha1.net mailto:chott@praha1.net* *Phone:*+420 245 004 005 *Mobile:*+420 733 123 135***
*Metropolitní síť Praha 1 z.s.p.o.* Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net http://www.praha1.net
Popis: Facebook http://www.facebook.com/praha1nethttp://www.linkedin.com/pub/tomas-chott/49/97a/1aa
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium