Hello,
My dashboard is showing port errors and I'm trying to understand where this information is coming from ?
[image: Inline image 1]
Those are all different routers.
Here's show int of the 1st one. Are the errors being read from the input error below ? It's been on Rx: 6 for a very long time, even if I clear the counters.
xxxx-xxxx#show int g0/1/1 GigabitEthernet0/1/1 is up, line protocol is up Hardware is SPA-2X1GE-V2, address is 0026.0ba5.0a11 (bia 0026.0ba5.0a11) Description: Management Internet address is 10.75.1.3/24 MTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive not supported Full Duplex, 1000Mbps, link type is force-up, media type is RJ45 output flow-control is on, input flow-control is on ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:01, output 00:00:01, output hang never Last clearing of "show interface" counters 14:22:12 Input queue: 0/375/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 798000 bits/sec, 84 packets/sec 5 minute output rate 56000 bits/sec, 61 packets/sec 3721054 packets input, 4443301060 bytes, 0 no buffer Received 604 broadcasts (0 IP multicasts) 0 runts, 1224 giants, 0 throttles * 1224 input errors*, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 24679 multicast, 0 pause input 1957690 packets output, 267851747 bytes, 0 underruns 0 output errors, 0 collisions, 0 interface resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 pause output 0 output buffer failures, 0 output buffers swapped out
Thanks in advance!
Ross.
