Hi Adam,

As of a couple of weeks ago, the Cisco recommended route for reporting from the new family of Catalyst access points (e.g. 9136) seems to be:

[AP] <===> [WLC 9800] <===> [DNA Center] <===> [API support for 3rd party reports]

NB. DNA Center is specifically shown above because Prime seems to be heading towards end-of-life status.

:-(

Darren

On Fri, 3 Mar 2023 at 15:33, Adam Armstrong <adama@observium.org> wrote:

How do they think you should be collecting AP status now?

adam.

Storer, Darren via observium wrote on 02/03/2023 01:35:

Sadly, Cisco told me that the old-style SNMP status for all the WAPs connected to 9800 WLC is not supported... Has anyone else had any success?

Thanks

Darren

On Wed, 14 Dec 2022 at 17:44, Storer, Darren <darren.storer@gmail.com> wrote:

PS. Cisco notes on SNMP monitoring the 9800 WLC can be found here:
https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9800-series-wireless-controllers/217460-monitor-catalyst-9800-wlc-via-snmp-with.html

On Wed, 14 Dec 2022 at 16:43, Storer, Darren <darren.storer@gmail.com> wrote:

Hi Adam,

For the 9800 WLC, I see:

sysObjectID          .1.3.6.1.4.1.9.1.2530

sysDescr             Cisco IOS Software [Cupertino], C9800 Software (C9800_IOSXE-K9), Version 17.9.2, RELEASE SOFTWARE (fc2)

The recent Catalyst 9136 series access points also support air quality monitoring - please let me know what you need (walk data etc.) to display the environmental data - it would be very useful.

Thanks again

Darren

On Thu, 1 Dec 2022 at 23:43, Adam Armstrong via observium <observium@lists.observium.org> wrote:

I vaguely recall something about this recently, the 9800 is an IOS device that reports as IOS, rather than running the older WLC OS?

I can't remember the reason for the complexity, I think we just need to look at the ability to allow IOS devices to poll the old WLC MIBs, though obviously not globally as 99.9% of IOS doesn't do wifi.

What is the sysObjectID and sysDescr of this device?

adam.

andri--- via observium

30 November 2022 08:38

Hi

Our organization recently upgraded from Cisco 5520 WLC to Cisco 9800 WLC.
In observium I get really good statistics about wireless client count and wireless ap count on the 5520 but not on the 9800.
I am not sure if this is something on observium side or cisco side.
But I wanted to ask if anyone has the same issue and if they found a solution. Or maybe this is just something that needs to be added.

Please let me know if there is any further information I can submit.

Best regards
Andri
_______________________________________________
observium mailing list -- observium@lists.observium.org
To unsubscribe send an email to observium-leave@lists.observium.org

--

Sent from Postbox

_______________________________________________
observium mailing list -- observium@lists.observium.org
To unsubscribe send an email to observium-leave@lists.observium.org

_______________________________________________
observium mailing list -- observium@lists.observium.org
To unsubscribe send an email to observium-leave@lists.observium.org

--

Sent from Postbox