Hello!

I have a few Mikrotik RB750r2, polled by SNMPv3, and I can't have graphs working in Observium.

In those routers, I get ethernet interface oids with "/interface print oid"

[...]
 0  R  name=.1.3.6.1.2.1.2.2.1.2.1 actual-mtu=.1.3.6.1.2.1.2.2.1.4.1
       mac-address=.1.3.6.1.2.1.2.2.1.6.1 admin-status=.1.3.6.1.2.1.2.2.1.7.1
       oper-status=.1.3.6.1.2.1.2.2.1.8.1 bytes-in=.1.3.6.1.2.1.31.1.1.1.6.1
       packets-in=.1.3.6.1.2.1.31.1.1.1.7.1
       discards-in=.1.3.6.1.2.1.2.2.1.13.1 errors-in=.1.3.6.1.2.1.2.2.1.14.1
       bytes-out=.1.3.6.1.2.1.31.1.1.1.10.1
       packets-out=.1.3.6.1.2.1.31.1.1.1.11.1
       discards-out=.1.3.6.1.2.1.2.2.1.19.1
       errors-out=.1.3.6.1.2.1.2.2.1.20.

[...]

and with  "snmpwalk -v3 -u user -l authpriv -a SHA -A pass1 -x AES -X pass2 <ipdev> " y can get the values for each oid, specifically:

iso.3.6.1.2.1.31.1.1.1.6.1 = Counter64: 604689902
...

iso.3.6.1.2.1.31.1.1.1.10.1 = Counter64: 116701642

I added the device with

/opt/obserivium/add_device.php <ipdev> ap v3 user pass1 pass2 sha aes 

without errors, and discovery and poller processes ends without errors:

+---------+-----------+----------+---------+----------+----------+---------+----------+--------+---------+----+
| ifIndex | Label     | Type     | Speed   | BPS In   | BPS Out  | Data In | Data Out | PPS In | PPS Out | HC |
+---------+-----------+----------+---------+----------+----------+---------+----------+--------+---------+----+
| 1       | Ether1    | Ethernet | 100Mbps | 232kbps  | 192kbps  | 1.22MB  | 1.01MB   | 66.4   | 77.7    | Y  |
| 2       | Ether2    | Ethernet | 1Gbps   | 133kbps  | 152kbps  | 718kB   | 820kB    | 87     | 74.3    | Y  |
| 3       | Ether3    | Ethernet | 0bps    | 0bps     | 0bps     | 0B      | 0B       | 0      | 0       | Y  |
| 4       | Ether4    | Ethernet | 0bps    | 0bps     | 0bps     | 0B      | 0B       | 0      | 0       | Y  |
| 5       | Ether5    | Ethernet | 0bps    | 0bps     | 0bps     | 0B      | 0B       | 0      | 0       | Y  |
| 7       | bridge1   | Bridge   | 0bps    | 131kbps  | 149kbps  | 704kB   | 805kB    | 87.4   | 75.8    | Y  |
| 8       | ovpn-out1 | Other    | 10Mbps  | 92.1kbps | 94.1kbps | 495kB   | 505kB    | 61.7   | 63.6    | Y  |
+---------+-----------+----------+---------+----------+----------+---------+----------+--------+---------+----+

But I can get the graphs for the ports nor the others items.

¿Any suggestions?

Thanks in advance!

-Javier

_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium