Bandwidth won't need to be set unless you want some arbitrary limit that is lower than the line rate. Sounds like it's a 10G interface that runs at 10G, so the bandwidth statement would be superfluous.
*Spencer Ryan* | Senior Systems Administrator | sryan@arbor.net *Arbor Networks* +1.734.794.5033 (d) | +1.734.846.2053 (m) www.arbornetworks.com
On Tue, Feb 24, 2015 at 3:40 PM, Leroux, Steve sleroux@ntl.nt.net wrote:
Make sure your conditions is “any”.
Also, check your switch interface “bandwidth” setting. Make sure it’s set to the properly.
Example:
Int GigabitEthernet 0/0
bandwidth 1000000Steve Leroux
Technical Operations Manager
NorthernTel, a division of Bell Aliant
*From:* Arya, Renuka [BSD] - MED [mailto:rarya@medicine.bsd.uchicago.edu] *Sent:* Tuesday, February 24, 2015 3:30 PM
*To:* Observium Network Observation System *Subject:* Re: [Observium] Alert Checker on Observium
Thanks Steve!
I was able to get the alert configured on one of my switches.
But doesn't looks like it is working. The rule says send out an alert when the traffic percentage is more than 50 % (In our case which should be more than 5 Gbps).
I ran a performance tool for 15 minutes giving me a throughput of ~9 Gbps on ethernet port 1 but I do not see any alerts in the alert check. See attachments.
*From:* observium [observium-bounces@observium.org] on behalf of Leroux, Steve [sleroux@ntl.nt.net] *Sent:* Tuesday, February 24, 2015 12:23 PM *To:* Observium Network Observation System *Subject:* Re: [Observium] Alert Checker on Observium
Change your Device match to * and Entity match to *.
After that it working, work at narrowing your hostname and entity.
Steve Leroux
Technical Operations Manager
NorthernTel, a division of Bell Aliant
*From:* Arya, Renuka [BSD] - MED [mailto:rarya@medicine.bsd.uchicago.edu rarya@medicine.bsd.uchicago.edu] *Sent:* Tuesday, February 24, 2015 1:16 PM *To:* Observium Network Observation System *Subject:* Re: [Observium] Alert Checker on Observium
Thanks Kevin!
I did clicked the 'regenerate' button but does not see a match.
I wonder if my alert is set right, since it doesn't seems to have any match. I see everything as 0/0/0/0.
Steve, I tried changing the entity match to ifDescr not match Loopback* but see the same thing.
Regards
Renuka
*From:* observium [observium-bounces@observium.org] on behalf of Leroux, Steve [sleroux@ntl.nt.net] *Sent:* Tuesday, February 24, 2015 12:04 PM *To:* Observium Network Observation System *Subject:* Re: [Observium] Alert Checker on Observium
Hi Renuka,
Here’s what mine looks like. Got 192 interfaces being monitored.
Steve Leroux
*From:* Arya, Renuka [BSD] - MED [mailto:rarya@medicine.bsd.uchicago.edu rarya@medicine.bsd.uchicago.edu] *Sent:* Tuesday, February 24, 2015 12:14 PM *To:* Observium Network Observation System *Subject:* [Observium] Alert Checker on Observium
Hi All,
I am just starting to use alert checker in Observium.
I started with a basic alert checker on one of my switches but not sure if it is working. See attachment.
I wanted Observium to set an alerts if the traffic on any of the ports exceeds 50%.
I ran a network performance tool on one of my machine (sending traffic at 8-9 Gbps) but I don't see any alerts been generated.
Thanks!
Regards
Renuka
This email is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged and confidential. If the reader of this email message is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is prohibited. If you have received this email in error, please notify the sender and destroy/delete all copies of the transmittal.
Thank you.
This email is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged and confidential. If the reader of this email message is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is prohibited. If you have received this email in error, please notify the sender and destroy/delete all copies of the transmittal.
Thank you.
This email is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged and confidential. If the reader of this email message is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is prohibited. If you have received this email in error, please notify the sender and destroy/delete all copies of the transmittal.
Thank you.
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
