Hmm… looks like that your device is not offering any sensor information.
Please try pulling those sensor values by hand with snmpget/snmpwalk to check if your device is offering them.
Otherwise check your SNMP RO settings. Try with: “snmp-server community hiddencommunity RO SystemOwner” and/or upgrade IOS-XR.
Mit freundlichem Gruß
Stadtwerke Norderstedt
Denis Klimek
Professional Network Engineer
IP-Systemtechnik
Tel: 040 / 521 04 – 1049
Mobil: 0151 / 652 219 06
dklimek@stadtwerke-norderstedt.de
www.stadtwerke-norderstedt.de
Von: observium [mailto:observium-bounces@observium.org]
Im Auftrag von Edvinas Kairys via observium
Gesendet: Freitag, 26. Juli 2019 14:02
An: Markus Klock
Cc: Edvinas Kairys; Observium Network Observation System
Betreff: Re: [Observium] Question about health graphs on IOS-XR
Strange.
Its still not running debug mode.
Try moving the -d before -m.
You do not use the right symbol in front of the debug flag. You can see the - is a little bit longer in front of the "-d" in your command which makes it ignore the debug flag. (or this mail just changed font?)
Use the -d and put all the output on pastebin or similar as the text output will be huge.
and i hadn't removed anything:
infra [root@observ001prvitx ~]# /opt/observium/discovery.php -h ny2asr01 -m sensors –d
___ _ _
/ _ \ | |__ ___ ___ _ __ __ __(_) _ _ _ __ ___
| | | || '_ \ / __| / _ \| '__|\ \ / /| || | | || '_ ` _ \
| |_| || |_) |\__ \| __/| | \ V / | || |_| || | | | | |
\___/ |_.__/ |___/ \___||_| \_/ |_| \__,_||_| |_| |_|
Observium Professional 19.7.9962
http://www.observium.org
##### Starting discovery run at 2019-07-26 08:58:30 #####
##### ny2asr01 [362] #####
o OS Type iosxr
o OS Group cisco
o SNMP Version v3
o Last discovery 2019-07-26 10:41:36
o Last duration 7.97 seconds
##### Module Start: sensors #####
o CISCO-ENTITY-SENSOR-MIB
o CISCO-ENVMON-MIB Fans
o CISCO-ENTITY-FRU-CONTROL-MIB
o CISCO-POWER-ETHERNET-EXT-MIB
o POWER-ETHERNET-MIB
o ENTITY-SENSOR-MIB
o CISCO-RF-MIB cRFCfgRedundancyOperMode [!]cRFStatusUnitState [!]cRFStatusPeerUnitState [!]
o Duration 7.73s
##### ny2asr01 [362] completed discovery modules at 2019-07-26 08:58:38 #####
o Discovery time 7.7355 seconds
##### Finished discovery run at 2019-07-26 08:58:38 #####
o Devices Discovered 1
o Discovery Time 8.008 secs
o Memory usage 14MB (peak: 14MB)
o MySQL Usage Cell[1/0s] Row[5/0.001s] Rows[36/0.015s] Column[1/0s] Update[1/0.005s] Insert[1/0.004s] Delete[1/0.006s]
o RRDTool Usage
infra [root@observ001prvitx ~]#
it provides, i just need to add keyword named PHY to get those:
show controllers tenGigE 0/0/2/3 phy
Fri Jul 26 10:43:13.640 Summer
SFP EEPROM port: 3
Xcvr Type: SFP
Xcvr Code: SFP-10G-LR
Encoding: 64B66B
Bit Rate: 10300 Mbps
Link Reach 9u fiber (Km): 10000 meter
Link Reach 9u fiber (100m): 10000 meter
Vendor Name: CISCO-SUMITOMO
Vendor OUI: 00.00.5f
Vendor Part Number: SPP5200LR-C6 (rev.: B )
Laser wavelength: 1310 nm (fraction: 0.00 nm)
Optional SFP Signal: Tx_Disable, Tx_Fault, LOS
Vendor Serial Number: SPC1820003Z
Date Code (yy/mm/dd): 14/05/12 lot code: 78
Diagnostic Monitoring: DOM, Int. Cal.,
Enhanced Options: SW RX LOS Mon., SW TX Fault Mon, SW TX Disable, Alarm/Warning Flags
MSA Data
0x0000: 03 04 07 20 00 00 00 00 : 00 00 00 06 67 00 0a 64
0x0010: 00 00 00 00 43 49 53 43 : 4f 2d 53 55 4d 49 54 4f
0x0020: 4d 4f 20 20 00 00 00 5f : 53 50 50 35 32 30 30 4c
0x0030: 52 2d 43 36 20 20 20 20 : 42 20 20 20 05 1e 00 06
0x0040: 00 1a 00 00 53 50 43 31 : 38 32 30 30 30 33 5a 20
0x0050: 20 20 20 20 31 34 30 35 : 31 32 37 38 68 f0 03 4f
0x0060: 00 00 0b a2 64 ac 18 cb : 55 a5 90 85 ec 03 97 1f
0x0070: 2e b1 97 00 00 00 00 00 : 00 00 00 00 bd 13 55 a4
Thresholds: Alarm High Warning High Warning Low Alarm Low
Temperature: +75.000 C +70.000 C +0.000 C -5.000 C
Voltage: 3.630 Volt 3.465 Volt 3.135 Volt 2.970 Volt
Bias: 90.000 mAmps 84.000 mAmps 24.000 mAmps 20.000 mAmps
Transmit Power: 2.23870 mW (3.49996 dBm) 1.12200 mW (0.49993 dBm) 0.15140 mW (-8.19874 dBm) 0.06030 mW (-12.19683 dBm)
Receive Power: 2.23870 mW (3.49996 dBm) 1.12200 mW (0.49993 dBm) 0.03630 mW (-14.40093 dBm) 0.01450 mW (-18.38632 dBm)
Temperature: 36.688
Voltage: 3.293 Volt
Tx Bias: 47.504 mAmps
Tx Power: 0.44510 mW (-3.51542 dBm)
Rx Power: 0.10330 mW (-9.85900 dBm)
Oper. Status/Control:
EEPROM Memory (A2 lower)
0x0100: 4b 00 fb 00 46 00 00 00 : 8d cc 74 04 87 5a 7a 76
0x0110: af c8 27 10 a4 10 2e e0 : 57 73 02 5b 2b d4 05 ea
0x0120: 57 73 00 91 2b d4 01 6b : 00 00 00 00 00 00 00 00
0x0130: 00 00 00 00 00 00 00 00 : 00 00 00 00 00 00 00 00
0x0140: 00 00 00 00 3f 80 00 00 : 00 00 00 00 01 00 00 00
0x0150: 01 00 00 00 01 00 00 00 : 01 00 00 00 00 00 00 3c
0x0160: 24 b0 80 a7 5c c8 11 63 : 04 09 00 00 00 00 00 00
0x0170: 00 00 00 00 00 00 00 00 : 00 00 00 00 00 00 00 01
CLEI Code: COUIA75CAA
Part Number: 10-2457-02 (ver.: V02 )
Temp/Alarm/Power Flags: COM, commercial 0C to 70C
Minimum Temperature: 0
Maximum Temperature: 70
Calibration Constants: LBC Scale, Temperature, Laser bias current, Output power,
Product Id: SFP-10G-LR
EEPROM Memory (A2 upper)
0x0180: 43 4f 55 49 41 37 35 43 : 41 41 31 30 2d 32 34 35
0x0190: 37 2d 30 32 56 30 32 20 : 01 00 46 00 00 00 00 b0
0x01a0: 00 00 00 00 00 00 00 00 : 00 00 8c dd 94 00 ac a5
0x01b0: d6 cd 00 00 1e 00 50 3e : 11 70 0f 2d 00 00 aa aa
0x01c0: 53 46 50 2d 31 30 47 2d : 4c 52 20 20 20 20 20 20
0x01d0: 20 20 20 20 32 33 00 00 : 00 00 00 00 00 00 00 2e
0x01e0: 20 26 2b 30 33 36 2b 36 : 00 00 00 00 00 00 00 00
0x01f0: 00 00 00 00 00 6b 00 00 : ff ff ff ff 00 00 00 00
Maybe this is the problem ?
@Edvinas: As you see: Your optic is not transmitting any information for those values. Or you entered wrong command on Cisco CLI ;-)
Also your debug log from ./discovery is too small. Looks like you removed most of the information....
Mit freundlichem Gruß
Stadtwerke Norderstedt
Denis Klimek
Professional Network Engineer
IP-Systemtechnik
Tel: 040 / 521 04 – 1049
Mobil: 0151 / 652 219 06
dklimek@stadtwerke-norderstedt.de
www.stadtwerke-norderstedt.de
-----Ursprüngliche Nachricht-----
Von: observium [mailto:observium-bounces@observium.org] Im Auftrag von emilio brambilla via observium
Gesendet: Freitag, 26. Juli 2019 09:20
An: observium@observium.org
Cc: emilio brambilla
Betreff: Re: [Observium] Question about health graphs on IOS-XR
hello,
On 26/07/2019 08:49, Edvinas Kairys via observium wrote:
> hello !
>
> /opt/observium/discovery.php -h ny2asr01 -m sensors –d
>
don't know if it's the same problem or a different one, but as we have
sensors involved I'm adding this:
since 2019-07-14, after upgrade to r9962, our observium instance lost
all temperature sensors on all cisco devices (many cisco switch and
routers with both ios and iosxr)
it is still graphing other brands devices temperatures.
--
bye,
emilio
_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium