22 Jan
2019
22 Jan
'19
7:47 a.m.
Change snmp version to v1, this will disable use HC counters.
Here nothing to do in our code, since this is exactly firmware/hardware error.
Simon Mousey Smith via observium wrote on 22.01.19 16:18:
Hi,
Ok im more confused now
I added 3 more of the same switches to monitor, and ive just noticed the first 4 ports on each of the switches dont have stats? But the other 5 ports do? And plans do too?
But what I’ve also noticed in the section=ports page, the first 4 ports are 64bit and the rest are 32bit?
Could this be the problem?
And also from the looks of it, YES the ifOutOctets does increase each poller cycle
Attached is a second poller output with debug
Regards
Simon
On 22 Jan 2019, at 12:59, Markus Klock <markus@best-practice.se mailto:markus@best-practice.se> wrote:
its probably because they do not change. If you poll the ifOutOctets again, has it increased? If its the same every time Observium polls is then the rate is 0 as no new packets have exited that port. /Markus
Den tis 22 jan. 2019 kl 13:38 skrev Simon Mousey Smith via observium <observium@observium.org mailto:observium@observium.org>:
HI, The other strange thing I have noticed if I take my g1 main interface in port Yes the ifInOctets are 0, but the ifOutOctets are 595141390 But yet observium is showing ifOutOctets as 0 ??? Same with broadcastpkts? Any ideas? [1] => array( [ifIndex] => string(1) "1" [ifDescr] => string(18) "Ethernet Interface" [ifType] => string(14) "ethernetCsmacd" [ifMtu] => string(4) "1500" [ifSpeed] => string(10) "1000000000" [ifPhysAddress] => string(17) "d8:5d:4c:86:fd:37" [ifAdminStatus] => string(2) "up" [ifOperStatus] => string(2) "up" [ifLastChange] => string(13) "19:2:38:31.90" [ifInOctets] => string(1) "0" [ifInUcastPkts] => string(9) "104037994" [ifInNUcastPkts] => string(1) "0" [ifInErrors] => string(1) "0" [ifInUnknownProtos] => string(1) "0" [ifOutOctets] => string(9) "595141390" [ifOutUcastPkts] => string(1) "0" [ifOutNUcastPkts] => string(7) "4453773" [ifOutDiscards] => string(1) "0" [ifSpecific] => string(11) "zeroDotZero" [ifName] => string(2) "g1" [ifInMulticastPkts] => string(1) "0" [ifInBroadcastPkts] => string(8) "13670731" [ifOutMulticastPkts] => string(1) "0" [ifOutBroadcastPkts] => string(6) "284703" [ifHCInOctets] => string(1) "0" [ifHCInMulticastPkts] => string(1) "0" [ifHCInBroadcastPkts] => string(1) "0" [ifHCOutOctets] => string(1) "0" [ifHCOutMulticastPkts] => string(1) "0" [ifHCOutBroadcastPkts] => string(1) "0" [ifLinkUpDownTrapEnable] => string(7) "enabled" [ifHighSpeed] => string(1) "0" [ifPromiscuousMode] => string(4) "true" [ifConnectorPresent] => string(4) "true" [ifAlias] => string(6) "MainIn" [ifCounterDiscontinuityTime] => string(12) "0:0:00:00.00" [dot3StatsDuplexStatus] => string(10) "fullDuplex" [ifVlan] => string(1) "1" [ifTrunk] => string(0) "" ) Processing port ifIndex 1 with function process_port_label() Processing port ifIndex 1 with function process_port_etherlike() 64-bit, IFLASTCHANGE unknown/false, used system times. MainIn ifInOctets (0 B) 0 Bps 120 secs ifOutOctets (0 B) 0 Bps 120 secs ifInErrors (0 B) 0 Bps 120 secs ifOutErrors (0 B) 0 Bps 120 secs ifInUcastPkts (0 B) 0 Bps 120 secs ifOutUcastPkts (0 B) 0 Bps 120 secs ifInNUcastPkts (0 B) 0 Bps 120 secs ifOutNUcastPkts (0 B) 0 Bps 120 secs ifInBroadcastPkts (0 B) 0 Bps 120 secs ifOutBroadcastPkts (0 B) 0 Bps 120 secs ifInMulticastPkts (0 B) 0 Bps 120 secs ifOutMulticastPkts (0 B) 0 Bps 120 secs ifInDiscards (0 B) 0 Bps 120 secs ifOutDiscards (0 B) 0 Bps 120 secs Regards SimonOn 22 Jan 2019, at 12:19, Markus Klock via observium <observium@observium.org <mailto:observium@observium.org>> wrote: When a vendor fails to even implement IF-MIB you know they suck at SNMP... /Markus Den tis 22 jan. 2019 kl 13:11 skrev Adam Armstrong via observium <observium@observium.org <mailto:observium@observium.org>>: Ahh, stupid vendors! adam.On 2019-01-22 12:09:18, Mike Stupalov via observium <observium@observium.org <mailto:observium@observium.org>> wrote: Hi, write to vendor.. this device return empty counters (and not for all indexes): ifHCInOctets.1 = 0 ifHCInOctets.2 = 0 ifHCInOctets.3 = 0 ifHCInOctets.4 = 0 ifHCInOctets.5 = 0 ifHCOutOctets.1 = 0 ifHCOutOctets.2 = 0 ifHCOutOctets.3 = 0 ifHCOutOctets.4 = 0 but some ports still return non-HC counters: ifInOctets.6 = 1133938806 ifInOctets.7 = 555769688 ifOutOctets.1 = 595141390 ifOutOctets.2 = 708574072 ifOutOctets.3 = 4019307600 ifOutOctets.4 = 0 ifOutOctets.5 = 0 ifOutOctets.6 = 1351693276 ifOutOctets.7 = 1926878970 but anyway - we prefer HC counters, and randomly empty counters seems as device or firmware broken. Adam Armstrong via observium wrote on 22.01.19 15:04:Walk ifInOctets and ifOutOctets and see if those ports' counters are changing over time. adam.On 2019-01-22 10:25:46, Simon Mousey Smith via observium <observium@observium.org> <mailto:observium@observium.org> wrote: Hi All, Im trying to work out if the is something wrong with my switch or observium? Observium detects all the ports fine, vlans fine, But its not showing any traffic on the ports? And when I run the -dd in the poller.php the output shows that the is traffic on the ports? Attached is the debug and a screenshot showing the ports in observium Regards Simon_______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium_______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium-- Mike Stupalov Observium Limited, http://observium.org <http://observium.org/>_______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium_______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
--
Mike Stupalov
Observium Limited, http://observium.org