Hi Chip,

Your filesystem was full or some other corruption has occured.

do : 

rm /opt/observium/rrd/router.local.com/port-62.rrd

And it should correct itself.

This happens when an rrd file is created incorrectly, usually because the disk is full and can't be read back later. Make sure your disk isn't full, and if it's an SSD, beware you may need to replace it!

adam.

On 14/09/2015 21:52:27, Chip Pleasants <wpleasants@gmail.com> wrote:

Hi All,

I'm seeing "error drawing graph" on several of our Cisco ASR's interfaces, so I'm hoping someone coupe point me in the right direction.  I'm running Centos 6.6 with the latest rrdtool rrdtool-1.3.8-7.el6-x86_64 and CE version 0.15.6.6430.  I've removed the specific graph rrd file then run the following two commands for debugging purposes.  php ./discovery.php -d -h router.local.com php ./poller.php -d -h router.local.com.   The file is 0 bytes for some reason.  Oddly enough two of the three interfaces issues are with BDI interfaces. The weird part is there is one BDI interface on each box that is displaying correctly.  Let me know if you any anything else to assist in troubleshooting. 

Thanks,

Chip

Port BDI3004(62) replacing with 64-bit...

dot3Duplex, VLAN == TELECOM TRANSIT // CID:  // CONTACT: 

 ifInOctets (583452815 B) 2244049.2884615 Bps 260 secs

 ifOutOctets (34747474 B) 133644.13076923 Bps 260 secs

 ifInErrors (0 B) 0 Bps 260 secs

 ifOutErrors (0 B) 0 Bps 260 secs

 ifInUcastPkts (5021371 B) 19312.965384615 Bps 260 secs

 ifOutUcastPkts (50407 B) 193.87307692308 Bps 260 secs

bps(17.9Mbps/1.07Mbps)bytes(556MB/33.1MB)pkts(19.3kpps/193pps)RRD[%g/usr/bin/rrdtool create /opt/observium/rrd/router.local.com/port-62.rrd \

      DS:INOCTETS:DERIVE:600:0:12500000000 \

      DS:OUTOCTETS:DERIVE:600:0:12500000000 \

      DS:INERRORS:DERIVE:600:0:12500000000 \

      DS:OUTERRORS:DERIVE:600:0:12500000000 \

      DS:INUCASTPKTS:DERIVE:600:0:12500000000 \

      DS:OUTUCASTPKTS:DERIVE:600:0:12500000000 \

      DS:INNUCASTPKTS:DERIVE:600:0:12500000000 \

      DS:OUTNUCASTPKTS:DERIVE:600:0:12500000000 \

      DS:INDISCARDS:DERIVE:600:0:12500000000 \

      DS:OUTDISCARDS:DERIVE:600:0:12500000000 \

      DS:INUNKNOWNPROTOS:DERIVE:600:0:12500000000 \

      DS:INBROADCASTPKTS:DERIVE:600:0:12500000000 \

      DS:OUTBROADCASTPKTS:DERIVE:600:0:12500000000 \

      DS:INMULTICASTPKTS:DERIVE:600:0:12500000000 \

      DS:OUTMULTICASTPKTS:DERIVE:600:0:12500000000 --step 300 RRA:AVERAGE:0.5:1:2016  RRA:AVERAGE:0.5:6:2976  RRA:AVERAGE:0.5:24:1440  RRA:AVERAGE:0.5:288:1440                         RRA:MIN:0.5:6:1440      RRA:MIN:0.5:96:360       RRA:MIN:0.5:288:1440                         RRA:MAX:0.5:6:1440      RRA:MAX:0.5:96:360       RRA:MAX:0.5:288:1440 %n]

rrd_dontneed: Argument 'rrd_file' is NULL.

RRD[cmd[update /opt/observium/rrd/router.local.com/port-62.rrd N:2646180175082:22831627397426:0:0:22904108823:35248380163:0:0:0:0:0:0:0:0:0]

stdout[ERROR: mmaping file '/opt/observium/rrd/router.local.com/port-62.rrd': Invalid argument]

stderr[]]

_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium