Observium uses FQDN

GRTNX, RobJE

On Jun 9, 2013 6:20 PM, "Muhammad Alihyder Bhuiyan" <alihyder_cse@hotmail.com> wrote:
>
> Dear Sir,
>
> I Successfully install Observium at my office but i can not add my Device on Observium for monitoring . Here all are Cisco Device and I checked that snmpwalk is working. I can ping my all cisco device by name when try to add by cli command and also from GUI but the given error message shown: Could not ping dhanmondi.
>
> It may be mentioned here that, i checked everything as per this command: Usage (SNMPv1/2c): ./addhost.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6] But still same error message shown.
>
> I also check it :
> vi config.php and add the following part.
> $config['fping'] = "/usr/sbin/fping";
>
> but can not find fping file/folder to this location /usr/sbin .
>
>
> Therefore you are requested to provide me instruction step by step for solving this problem. See the bellow message for your kind information.
>
> root@Observium:/opt/observium# ping dhanmondi
> PING dhanmondi.mblbd.com (192.168.102.2) 56(84) bytes of data.
> 64 bytes from dhanmondi.mblbd.com (192.168.102.2): icmp_req=1 ttl=252 time=1.87 ms
> 64 bytes from dhanmondi.mblbd.com (192.168.102.2): icmp_req=2 ttl=252 time=2.03 ms
> 64 bytes from dhanmondi.mblbd.com (192.168.102.2): icmp_req=3 ttl=252 time=1.96 ms
> ^C
> --- dhanmondi.mblbd.com ping statistics ---
> 3 packets transmitted, 3 received, 0% packet loss, time 2003ms
> rtt min/avg/max/mdev = 1.872/1.956/2.038/0.084 ms
> root@Observium:/opt/observium#
>
>
> root@Observium:/opt/observium# ./addhost.php dhanmondi (my snmp communicty) v2c
> Could not ping dhanmondi
> Could not ping dhanmondi
>
> Observium v0.13.6.4140
> Add Host Tool
>
> Usage (SNMPv1/2c): ./addhost.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6]
> Usage (SNMPv3)   : Config Defaults : ./addhost.php <hostname> any v3 [user] [port] [udp|udp6|tcp|tcp6]
>                    No Auth, No Priv : ./addhost.php <hostname> nanp v3 [user] [port] [udp|udp6|tcp|tcp6]
>                       Auth, No Priv : ./addhost.php <hostname> anp v3 <user> <password> [md5|sha] [port] [udp|udp6|tcp|tcp6]
>                       Auth,    Priv : ./addhost.php <hostname> ap v3 <user> <password> <enckey> [md5|sha] [aes|dsa] [port] [ud           p|udp6|tcp|tcp6]
> Remember to run discovery for the host afterwards.
>
>
> root@Observium:/opt/observium#
>
> Waiting for your quick step by step instruction for solving my problem.
>
>
>
>
>
> --
> Thanks &
>
> Warm Regards.
>
> =============================
> Engr. Md. Alihyder Bhuiyan
> ( B.Sc. Engg. in CSE, CCNA, MCSA )
> Executive Officer (Networking)
> IT Division, Head Office
> Mercantile Bank Limited.
> Level-7, Sun Moon Star Tower
> 37 Dilkusha C/A, Dhaka-1000
> Tel   : +88 02 7113714, 7113717, 7110020, Ext: 517
> Mob : +88 01191 001 606
>    +88 01552 444 262
>      +88 01611 001 606
>
>
>
> > From: rob_vanhooren@mac.com
> > Date: Sat, 8 Jun 2013 20:31:57 -0400
> > To: observium@observium.org
> > Subject: [Observium] backend DB
> >
> > curious whether anyone's farted around with using MariaDB or *gasp* PostgreSQL for their install.
> >
> >
> > _______________________________________________
> > observium mailing list
> > observium@observium.org
> > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
>
> _______________________________________________
> observium mailing list
> observium@observium.org
> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
>