It's is possible disable on PORTS that's not show FDB Table?
On 2015-11-18 14:45, Gediminas Karčmarinas wrote:
after remove : ifEntry Time is about 8 sec with : Port (1) VLAN == 1250ifDescr ifAdminStatus ifMtu ifType ifPhysAddress ifTrunk bps(52bps/707bps)bytes(922B/12.1kB)pkts(35.4mpps/42.5mpps) withuot : ort (1) HighSpeed, VLAN == 1250bps(24bps/797bps)bytes(82B/2.63kB)pkts(37.0mpps/74.0mpps)
On 2015-11-18 14:12, Adam Armstrong wrote:
You can run that module in debug mode, and can see how long SNMP queries take :
./poller.php -h <device> -m ports -d
adam.
On 18/11/2015 11:42:06, Gediminas Karčmarinas gediminas@kava.lt wrote:
How to check what port module is used time ? ( example : error or other) Module [ mempools ] time: 0.0208s Polling IP-MIB ipSystemStats ipv4 ipv6 Module [ ipSystemStats ] time: 0.0771s Caching Oids: ifEntry ifXEntry dot3StatsDuplexStatus Port D-Link DGS-3120-24SC R4.04.R009 Port 1 on Unit 1(1) dot3Duplex, VLAN == 1bps(301Mbps/144Mbps)bytes(2.7GB/1.3GB)pkts(28.5kpps/21.9kpps) Port D-Link DGS-3120-24SC R4.04.R009 Port 2 on Unit 1(2) dot3Duplex, VLAN == 1bps(1.23Mbps/21.2Mbps)bytes(11.3MB/194MB)pkts(218pps/404pps) Port D-Link DGS-3120-24SC R4.04.R009 Port 3 on Unit 1(3) dot3Duplex, VLAN == 1bps(4.27Mbps/22.2Mbps)bytes(39.1MB/204MB)pkts(707pps/802pps) Port D-Link DGS-3120-24SC R4.04.R009 Port 4 on Unit 1(4) dot3Duplex, VLAN == 1bps(641kbps/91.3kbps)bytes(5.89MB/858kB)pkts(117pps/68.8pps) Port D-Link DGS-3120-24SC R4.04.R009 Port 5 on Unit 1(5) dot3Duplex, VLAN == 1bps(29.3Mbps/26.3Mbps)bytes(269MB/241MB)pkts(3.4kpps/2.88kpps) Port D-Link DGS-3120-24SC R4.04.R009 Port 6 on Unit 1(6) dot3Duplex, VLAN == 1bps(2.02Mbps/13.9Mbps)bytes(18.5MB/128MB)pkts(510pps/650pps) Port D-Link DGS-3120-24SC R4.04.R009 Port 7 on Unit 1(7) dot3Duplex, VLAN == 1bps(4.39Mbps/17.5Mbps)bytes(40.3MB/161MB)pkts(862pps/1.53kpps) Port D-Link DGS-3120-24SC R4.04.R009 Port 8 on Unit 1(8) dot3Duplex, VLAN == 1bps(6.83Mbps/22.6Mbps)bytes(62.6MB/208MB)pkts(1.05kpps/1.44kpps) Port D-Link DGS-3120-24SC R4.04.R009 Port 9 on Unit 1(9) dot3Duplex, VLAN == 1bps(3.33Mbps/20.2Mbps)bytes(30.5MB/185MB)pkts(738pps/931pps) Port D-Link DGS-3120-24SC R4.04.R009 Port 10 on Unit 1(10) dot3Duplex, VLAN == 1bps(40.9Mbps/31.7Mbps)bytes(375MB/291MB)pkts(4.22kpps/3.58kpps) Port D-Link DGS-3120-24SC R4.04.R009 Port 11 on Unit 1(11) dot3Duplex, VLAN == 1bps(6.71Mbps/19.4Mbps)bytes(61.6MB/178MB)pkts(1kpps/933pps) Port D-Link DGS-3120-24SC R4.04.R009 Port 12 on Unit 1(12) dot3Duplex, VLAN == 1bps(105kbps/22.8Mbps)bytes(991kB/209MB)pkts(81.3pps/124pps) Port D-Link DGS-3120-24SC R4.04.R009 Port 13 on Unit 1(13) dot3Duplex, VLAN == 1bps(103kbps/1.59Mbps)bytes(976kB/14.5MB)pkts(112pps/209pps) Port D-Link DGS-3120-24SC R4.04.R009 Port 14 on Unit 1(14) dot3Duplex, VLAN == 1bps(7.37Mbps/9.02Mbps)bytes(67.6MB/82.8MB)pkts(862pps/897pps) Port D-Link DGS-3120-24SC R4.04.R009 Port 15 on Unit 1(15) dot3Duplex, VLAN == 1bps(314kbps/15.9Mbps)bytes(2.88MB/146MB)pkts(355pps/655pps) Port D-Link DGS-3120-24SC R4.04.R009 Port 16 on Unit 1(16) dot3Duplex, VLAN == 1bps(4.59Mbps/19.1Mbps)bytes(42.1MB/176MB)pkts(640pps/854pps) Port D-Link DGS-3120-24SC R4.04.R009 Port 17 on Unit 1(17) dot3Duplex, VLAN == 1bps(10.2Mbps/34.9Mbps)bytes(94.3MB/320MB)pkts(1.72kpps/2.23kpps) Port D-Link DGS-3120-24SC R4.04.R009 Port 18 on Unit 1(18) dot3Duplex, VLAN == 1bps(8.45Mbps/14.4Mbps)bytes(77.6MB/132MB)pkts(1.31kpps/1.78kpps) Port D-Link DGS-3120-24SC R4.04.R009 Port 19 on Unit 1(19) dot3Duplex, VLAN == 1bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Port D-Link DGS-3120-24SC R4.04.R009 Port 20 on Unit 1(20) dot3Duplex, VLAN == 1bps(953kbps/49.0Mbps)bytes(8.75MB/450MB)pkts(1.3kpps/3.89kpps) Port D-Link DGS-3120-24SC R4.04.R009 Port 21 on Unit 1(21) dot3Duplex, VLAN == 1bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Port D-Link DGS-3120-24SC R4.04.R009 Port 22 on Unit 1(22) dot3Duplex, VLAN == 1bps(2.25Mbps/6.81Mbps)bytes(20.6MB/62.5MB)pkts(586pps/791pps) Port D-Link DGS-3120-24SC R4.04.R009 Port 23 on Unit 1(23) dot3Duplex, VLAN == 1bps(5.67Mbps/37.8Mbps)bytes(52.0MB/347MB)pkts(1.21kpps/2.16kpps) Port D-Link DGS-3120-24SC R4.04.R009 Port 24 on Unit 1(24) dot3Duplex, VLAN == 1bps(4.4Mbps/33.2Mbps)bytes(40.3MB/304MB)pkts(876pps/1.8kpps) Port D-Link DGS-3120-24SC R4.04.R009 Port 25 on Unit 1(25) dot3Duplex, VLAN == 1bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Port D-Link DGS-3120-24SC R4.04.R009 Port 26 on Unit 1(26) dot3Duplex, VLAN == 1bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Module [ ports ] time: 15.9878s
On 2015-11-18 11:57, Tom Laermans wrote:
Sure you can, just remove them from the device ;-)
On 2015-11-18 10:42, Adam Armstrong wrote:
You can't delete ports.
Adam.
Sent with AquaMail for Android http://www.aqua-mail.com
On 18 November 2015 5:01:51 am Chaman Rathee chaman.rathee@progression.com wrote:
Hi Team,
I have many ports that are showing down atobservium monitoring system.
So, please suggest how to delete “Down Ports” in observium.
………
With Best Regards,
Chaman Rathee
Mob. No:- +91-9560055816
Fabrikam
Privileged or confidential information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), please delete this message and kindly notify the sender by an emailed reply. Opinions, conclusions and other information in this message that do not relate to the official business of Progression and its associate entities shall be understood as neither given nor endorsed by them.
observium mailing list observium@observium.org mailto:observium%40observium.org http:/ /postman.memetic.org/cgi-bin/mailman/ listinfo/ observium http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
