Hi,

On 03.02.2015 11:41, Karsten Schwarz wrote:
Hi Mike,

disabling CEF is the worst thing to do on a cisco switch.
The Problem is just type error in the polling script.

The polled OID name is _not_ CISCO-CEF-MIB::cefFIBSummaryEntry!
It is CISCO-CEF-MIB::CefFIBSummaryEntry

The Mib lists the the description as
:cefFIBSummaryEntry, but the value name is CISCO-CEF-MIB::CefFIBSummaryEntry
You are sure that know this better than me? ;)

CefFIBSummaryEntry is syntax description for cefFIBSummaryEntry.


regards


Karsten Schwarz
Plateau des Systèmes d'Information
Infrastructure


Centre Hospitalier du Nord
120, avenue Salentiny
L-9080 Ettelbruck

+352 8166-63418
karsten.schwarz@chdn.lu
http://www.chdn.lu





From:        Mike Stupalov <mike@observium.org>
To:        Observium Network Observation System <observium@observium.org>
Date:        29.01.2015 20:39
Subject:        Re: [Observium] An interesting issue with Cisco 2960Cs...
Sent by:        "observium" <observium-bounces@observium.org>




Try latest revision (r6218).
For my test device (WS-C2960C-8PC-L) polling time reduced from 124.78s -> to 17.52s (without disabling any module) :)


On Thu, Jan 29, 2015 at 7:14 PM, Richard Kuhns <rjk@wintek.com> wrote:
Hi Colin,

On 01/29/15 08:19, Colin Stubbs wrote:
> Hi Richard
>
> You're right, 2960C's are L2 only; and my understanding is the same in
> that they shouldn't be doing CEF at all.
>
> That said they're a similar hardware flavour to 2960S/3560X/3750X
> hardware, which can have L3 features enabled, so the software release in
> use probably has CEF code riddled right the way thru it.
>
> What happens when you attempt to run CEF related commands on the CLI, e.g.
>  - show cef background

This command isn't available.

>  - show platform ip unicast cef-idb

This command returns immediately with no output.

> e.g. are they available, do they return anything, does the CPU spike
> with the CLI commands too?

Nope, no CPU spike.

> The other obvious questions:
>  1) Which IOS version are you running?

We've now tested on 12.2(55)EX, 15.0(2)SE7, and 15.2(1)E3. All have the
same problem. I can use snmpbulkwalk to query
CISCO-CEF-MIB::cefFIBSummaryEntry and the SNMP ENGINE process CPU use
jumps to over 80%, and stays there for 20 to 50 seconds.

>  2) Is it the latest stable/recommended release?
>

15.0(2)SE7 is.

> -Colin
>

Hopefully this info will be useful to other Observium users. It's
definitely a Cisco problem, not an Observium problem. As long as we
remember to disable cisco-cef when installing a 2960C everything is fine.


        - Richard


--
Richard Kuhns <
rjk@wintek.com>     Main Number:      765-742-8428
Wintek Corporation                 Direct:           765-269-8541
427 N 6th Street                   Internet Support: 765-269-8503
Lafayette, IN 47901-2211           Consulting:       765-269-8504
_______________________________________________
observium mailing list

observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium



--

Mike Stupalov
http://observium.org/_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium




Pensez à l'environnement avant d'imprimer ce message / Think of the environment before printing out this message


-- 
Mike Stupalov
http://observium.org