I got also that whith the poller -h <hostname> -d command : 

[4] => Array

        (

            [ifIndex] => 4

            [ifDescr] => eth2

            [ifType] => ethernetCsmacd

            [ifMtu] => 1500

            [ifSpeed] => 4294967295

            [ifPhysAddress] => 0:25:90:25:ed:94

            [ifAdminStatus] => up

            [ifOperStatus] => up

            [ifLastChange] => 0:0:00:00.00

            [ifInOctets] => 2658142616

            [ifInUcastPkts] => 350641961

            [ifInNUcastPkts] => 30127

            [ifInDiscards] => 776355

            [ifInErrors] => 0

            [ifInUnknownProtos] => 0

            [ifOutOctets] => 2304886570

            [ifOutUcastPkts] => 3859691055

            [ifOutNUcastPkts] => 0

            [ifOutDiscards] => 0

            [ifOutErrors] => 0

            [ifOutQLen] => 0

            [ifSpecific] => zeroDotZero

            [ifName] => eth2

            [ifInMulticastPkts] => 30127

            [ifInBroadcastPkts] => 0

            [ifOutMulticastPkts] => 0

            [ifOutBroadcastPkts] => 0

            [ifHCInOctets] => 964730816920

            [ifHCInUcastPkts] => 4645609257

            [ifHCInMulticastPkts] => 30127

            [ifHCInBroadcastPkts] => 0

            [ifHCOutOctets] => 796873836330

            [ifHCOutUcastPkts] => 3859691055

            [ifHCOutMulticastPkts] => 0

            [ifHCOutBroadcastPkts] => 0

            [ifHighSpeed] => 10000

            [ifPromiscuousMode] => false

            [ifConnectorPresent] => true

            [ifAlias] =>

            [ifCounterDiscontinuityTime] => 0:0:00:00.00

        )

ifOutOctets and ifInOctets seem to have valid values

But when i run the same command again, the values are exactly the same, althought this a server with huge traffic.

MIB seems not been updated...

2012/10/24 Adam Armstrong <adama@memetic.org>

Yeah, that doesn't help us see what was returned by SNMP, does it?

On 24/10/2012 13:27, Bruno Galeppe wrote:

For each interface got something like that :

SQL[SELECT *, `ports`.`port_id` as `port_id` FROM  `ports` LEFT JOIN  `ports-state` ON  `ports`.port_id =  `ports-state`.port_id WHERE `device_id` = '2'] validvalidvalidvalidvalidvalidvalidvalidvalid

Port lo(1) HC HC VLAN ==

 ifInOctets (0 B) 0 Bps 10 secs

 ifOutOctets (0 B) 0 Bps 10 secs

 ifInErrors (0 B) 0 Bps 10 secs

 ifOutErrors (0 B) 0 Bps 10 secs

 ifInUcastPkts (0 B) 0 Bps 10 secs

 ifOutUcastPkts (0 B) 0 Bps 10 secs

bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps)OK u:0.00 s:0.01 r:1.80

RRD[^[[32mupdate /opt/observium/rrd/xxxxxx.xxxxxx.com/port-1.rrd N:28330012544:28330012544:0:0:4273103:4273103:0:0:0:0:0:0:0:0:0^[[0m]

SQL[INSERT INTO `ports-state` (`port_id`)  VALUES ('1')]

Warning: QDB - Insert failed. in /opt/observium/includes/dbFacile.php on line 81

state inserted

SQL[UPDATE `ports-state` set `poll_time` ='1351102961',`poll_period` ='10',`ifInOctets` ='28330012544',`ifInOctets_rate` ='0',`ifInOctets_delta` ='0',`ifOutOctets` ='28330012544',`ifOutOctets_rate` ='0',`ifOutOctets_delta` ='0',`ifInErrors` ='0',`ifInErrors_rate` ='0',`ifInErrors_delta` ='0',`ifOutErrors` ='0',`ifOutErrors_rate` ='0',`ifOutErrors_delta` ='0',`ifInUcastPkts` ='4273103',`ifInUcastPkts_rate` ='0',`ifInUcastPkts_delta` ='0',`ifOutUcastPkts` ='4273103',`ifOutUcastPkts_rate` ='0',`ifOutUcastPkts_delta` ='0',`ifInOctets_perc` ='0',`ifOutOctets_perc` ='0',`ifOctets_rate` ='0',`ifUcastPkts_rate` ='0',`ifErrors_rate` ='0' WHERE `port_id` = '1'] 1 updated

Port eth0(2) HC VLAN ==

 ifInOctets (0 B) 0 Bps 10 secs

 ifOutOctets (0 B) 0 Bps 10 secs

 ifInErrors (0 B) 0 Bps 10 secs

 ifOutErrors (0 B) 0 Bps 10 secs

 ifInUcastPkts (0 B) 0 Bps 10 secs

 ifOutUcastPkts (0 B) 0 Bps 10 secs

Warning: Division by zero in /opt/observium/includes/polling/ports.inc.php on line 304

Warning: Division by zero in /opt/observium/includes/polling/ports.inc.php on line 305

2012/10/24 Adam Armstrong <adama@memetic.org>

try poller.php -h <hostname> -d

adam.

On 24/10/2012 13:08, Bruno Galeppe wrote:

Hi,

Tried "tcpdump -i eth2 -n port 161"

-> nothing captured :/

Tried "php discovery.php -h all - iirc" and then  "/opt/observium/poller.php -h all" still got :

"Polling IP-MIB ipSystemStats

Caching Oids: ifEntry ifXEntry dot3StatsDuplexStatusvalidvalidvalidvalidvalidvalidvalidvalidvalid

Port lo(1) HC HC VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps)

Port eth0(2) HC VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps)

Port eth1(3) HC VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps)

Port eth2(4) HC HC HighSpeed VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps)

Port eth3(5) HC VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps)

Port dummy0(6) HC VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps)

Port tunl0(7) HC VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps)

Port sit0(8) HC VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps)

Port ip6tnl0(9) HC VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps)"

Can i have a paste of your snmpd.conf ?

Thx.

2012/10/24 Pieter De Wit <pieter@insync.za.net>

Hi,

On your observium box, run "tcpdump -i eth"X" -n port 161" and see how much traffic is going to the machine monitored. It sounds like the initial SNMP check works, following which it dies. I saw this on a Ubuntu install where something (ufw, iirc) wasn't happy with the SNMP traffic.

Perhaps you should also rediscover the machines (discovery -h all - iirc)

OR

Make sure that you have permission in SNMP to read that MIB. I have a very very very basic snmpd.conf that I deploy onto the machines.

Cheers,

Pieter

On 25/10/2012 05:01, Bruno Galeppe wrote:

:)

I certainly did something wrong, but can't figure what

I followed the Ubuntu SVN Installation instructions on a Ubuntu 12.04 system.

In fact i got one big peak at initialisation (thought it was because the mib never been interrogated), but nothing else after that.

2012/10/24 Adam Armstrong <adama@memetic.org>

Hrm. These things are quite difficult to diagnose.

Did you follow the install instructions properly, and are using a supported OS?

(hint: you didn't, otherwise it would work properly)

adam.

On 24/10/2012 10:51, Bruno Galeppe wrote:

Other graph (cpu, ram, disk space...) are ok (except proccess graph which indicate always 1 process for all devices don't know why)

2012/10/24 Adam Armstrong <adama@memetic.org>

What about the other graphs?

adam.

On 24/10/2012 10:46, Bruno Galeppe wrote:

all the traffic graphs

2012/10/24 Adam Armstrong <adama@memetic.org>

Is this just the device traffic graph, or all of the traffic graphs?

adam.

On 24/10/2012 10:43, Bruno Galeppe wrote:

Hi,

I set up several devices on Obervium, no problem so far, except for the Traffic Graphs which remain empty.

For example : http://img4.hostingpics.net/pics/168961data.jpg

The RRD file exist, but the data always return 0.00

How can I debug that ? Is there an snmpwalk command to help understand the problem ?

Regards,

_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium