same problem here - lot’s of false positive alarms. any quick fix suggestions on how to remedy the symptoms?
cheers, Andreas
On 20. Oct 2019, at 17:48, Ryan, Spencer via observium <observium@observium.org mailto:observium@observium.org> wrote:
Since updating to 10134 we’ve seen some odd behavior out of our high interface utilization alerts.
The alert itself is very simple, device matches *, entity is ifType equals ethernetCsmacd, and the test conditions are any of:
ifInOctets_perc ge 80 ifOutOctets_perc ge 80
Which has worked fine forever.
Now it’s throwing alarms on an odd mix of devices (UBNT, Palo Alto, Arista, Kemp VLM, Infoblox) for ports that are down/down loopbacks or HA interfaces not connected.
All of the ports it is alarming on show this in the data (Speed 0, and down/down):
ifSpeed=>0 ifHighSpeed=>0 ifOperStatus=>down ifAdminStatus=>down
Any idea what changed or why it’s alarming on these now? I’m guessing its trying to do the 80% math on….0 but I’d imagine that shouldn’t even run if the port is admin+operationally down.
This is a mgmt interface on an arista (which is unconnected and admin down):
https://pastebin.com/JsNvre40 https://pastebin.com/JsNvre40
As you can see the *_perc calcs are 0, it almost seems some kind of divide by 0 error.
Thanks in advance!
Spencer Ryan | Senior Systems Administrator | spencer.ryan@netscout.com mailto:spencer.ryan@netscout.com Arbor Networks | The security division of NETSCOUT +1.734.794.5033 (d) | +1.734.846.2053 (m) www.arbornetworks.com http://www.arbornetworks.com/
observium mailing list observium@observium.org mailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium http://postman.memetic.org/cgi-bin/mailman/listinfo/observium