Thanks,
Do this setting (snmp-server community hiddencommunity RO SystemOwner) also works for SNMP v3 ?
On Mon, Jul 29, 2019 at 9:31 AM Klimek, Denis < DKlimek@stadtwerke-norderstedt.de> wrote:
Hmm… looks like that your device is not offering any sensor information.
Please try pulling those sensor values by hand with snmpget/snmpwalk to check if your device is offering them.
Otherwise check your SNMP RO settings. Try with: “snmp-server community hiddencommunity RO SystemOwner” and/or upgrade IOS-XR.
Mit freundlichem Gruß
Stadtwerke Norderstedt
*Denis Klimek*
Professional Network Engineer
IP-Systemtechnik
Tel: 040 / 521 04 – 1049
Mobil: 0151 / 652 219 06
dklimek@stadtwerke-norderstedt.de
www.stadtwerke-norderstedt.de
*Von:* observium [mailto:observium-bounces@observium.org] *Im Auftrag von *Edvinas Kairys via observium *Gesendet:* Freitag, 26. Juli 2019 14:02 *An:* Markus Klock *Cc:* Edvinas Kairys; Observium Network Observation System *Betreff:* Re: [Observium] Question about health graphs on IOS-XR
here we go:
On Fri, Jul 26, 2019 at 2:39 PM Markus Klock markus@best-practice.se wrote:
Strange.
Its still not running debug mode.
Try moving the -d before -m.
/Markus
Den fre 26 juli 2019 13:00Edvinas Kairys edvinas.email@gmail.com skrev:
I think i do OK.
On Fri, Jul 26, 2019 at 12:52 PM Markus Klock markus@best-practice.se wrote:
You do not use the right symbol in front of the debug flag. You can see the - is a little bit longer in front of the "-d" in your command which makes it ignore the debug flag. (or this mail just changed font?)
Use the -d and put all the output on pastebin or similar as the text output will be huge.
/Markus
Den fre 26 juli 2019 10:59Edvinas Kairys via observium < observium@observium.org> skrev:
and i hadn't removed anything:
infra [root@observ001prvitx ~]# /opt/observium/discovery.php -h ny2asr01 -m sensors –d
/ _ \ | |__ ___ ___ _ __ __ __(_) _ _ _ __ ___ | | | || '_ \ / __| / _ | '__|\ \ / /| || | | || '_ ` _ \ | |_| || |_) |__ | __/| | \ V / | || |_| || | | | | | ___/ |_.__/ |___/ ___||_| _/ |_| __,_||_| |_| |_| Observium Professional 19.7.9962 http://www.observium.org
##### Starting discovery run at 2019-07-26 08:58:30 #####
##### ny2asr01 [362] #####
o OS Type iosxr o OS Group cisco o SNMP Version v3 o Last discovery 2019-07-26 10:41:36 o Last duration 7.97 seconds
##### Module Start: sensors #####
o CISCO-ENTITY-SENSOR-MIB o CISCO-ENVMON-MIB Fans o CISCO-ENTITY-FRU-CONTROL-MIB o CISCO-POWER-ETHERNET-EXT-MIB o POWER-ETHERNET-MIB o ENTITY-SENSOR-MIB o CISCO-RF-MIB cRFCfgRedundancyOperMode [!]cRFStatusUnitState [!]cRFStatusPeerUnitState [!]
o Duration 7.73s
##### ny2asr01 [362] completed discovery modules at 2019-07-26 08:58:38 #####
o Discovery time 7.7355 seconds
##### Finished discovery run at 2019-07-26 08:58:38 #####
o Devices Discovered 1 o Discovery Time 8.008 secs o Memory usage 14MB (peak: 14MB) o MySQL Usage Cell[1/0s] Row[5/0.001s] Rows[36/0.015s] Column[1/0s] Update[1/0.005s] Insert[1/0.004s] Delete[1/0.006s] o RRDTool Usage infra [root@observ001prvitx ~]#
On Fri, Jul 26, 2019 at 11:44 AM Edvinas Kairys edvinas.email@gmail.com wrote:
it provides, i just need to add keyword named *PHY *to get those:
show controllers tenGigE 0/0/2/3 *phy* Fri Jul 26 10:43:13.640 Summer
SFP EEPROM port: 3 Xcvr Type: SFP Xcvr Code: SFP-10G-LR Encoding: 64B66B Bit Rate: 10300 Mbps Link Reach 9u fiber (Km): 10000 meter Link Reach 9u fiber (100m): 10000 meter Vendor Name: CISCO-SUMITOMO Vendor OUI: 00.00.5f Vendor Part Number: SPP5200LR-C6 (rev.: B ) Laser wavelength: 1310 nm (fraction: 0.00 nm) Optional SFP Signal: Tx_Disable, Tx_Fault, LOS Vendor Serial Number: SPC1820003Z Date Code (yy/mm/dd): 14/05/12 lot code: 78 Diagnostic Monitoring: DOM, Int. Cal., Enhanced Options: SW RX LOS Mon., SW TX Fault Mon, SW TX Disable, Alarm/Warning Flags
MSA Data 0x0000: 03 04 07 20 00 00 00 00 : 00 00 00 06 67 00 0a 64 0x0010: 00 00 00 00 43 49 53 43 : 4f 2d 53 55 4d 49 54 4f 0x0020: 4d 4f 20 20 00 00 00 5f : 53 50 50 35 32 30 30 4c 0x0030: 52 2d 43 36 20 20 20 20 : 42 20 20 20 05 1e 00 06 0x0040: 00 1a 00 00 53 50 43 31 : 38 32 30 30 30 33 5a 20 0x0050: 20 20 20 20 31 34 30 35 : 31 32 37 38 68 f0 03 4f 0x0060: 00 00 0b a2 64 ac 18 cb : 55 a5 90 85 ec 03 97 1f 0x0070: 2e b1 97 00 00 00 00 00 : 00 00 00 00 bd 13 55 a4
Thresholds: Alarm High Warning High Warning Low Alarm Low Temperature: +75.000 C +70.000 C +0.000 C -5.000 C Voltage: 3.630 Volt 3.465 Volt 3.135 Volt 2.970 Volt Bias: 90.000 mAmps 84.000 mAmps 24.000 mAmps 20.000 mAmps Transmit Power: 2.23870 mW (3.49996 dBm) 1.12200 mW (0.49993dBm) 0.15140 mW (-8.19874 dBm) 0.06030 mW (-12.19683 dBm) Receive Power: 2.23870 mW (3.49996 dBm) 1.12200 mW (0.49993 dBm) 0.03630 mW (-14.40093 dBm) 0.01450 mW (-18.38632 dBm) Temperature: 36.688 Voltage: 3.293 Volt Tx Bias: 47.504 mAmps Tx Power: 0.44510 mW (-3.51542 dBm) Rx Power: 0.10330 mW (-9.85900 dBm) Oper. Status/Control: EEPROM Memory (A2 lower) 0x0100: 4b 00 fb 00 46 00 00 00 : 8d cc 74 04 87 5a 7a 76 0x0110: af c8 27 10 a4 10 2e e0 : 57 73 02 5b 2b d4 05 ea 0x0120: 57 73 00 91 2b d4 01 6b : 00 00 00 00 00 00 00 00 0x0130: 00 00 00 00 00 00 00 00 : 00 00 00 00 00 00 00 00 0x0140: 00 00 00 00 3f 80 00 00 : 00 00 00 00 01 00 00 00 0x0150: 01 00 00 00 01 00 00 00 : 01 00 00 00 00 00 00 3c 0x0160: 24 b0 80 a7 5c c8 11 63 : 04 09 00 00 00 00 00 00 0x0170: 00 00 00 00 00 00 00 00 : 00 00 00 00 00 00 00 01
CLEI Code: COUIA75CAA Part Number: 10-2457-02 (ver.: V02 ) Temp/Alarm/Power Flags: COM, commercial 0C to 70C Minimum Temperature: 0 Maximum Temperature: 70 Calibration Constants: LBC Scale, Temperature, Laser bias current,Output power, Product Id: SFP-10G-LR EEPROM Memory (A2 upper) 0x0180: 43 4f 55 49 41 37 35 43 : 41 41 31 30 2d 32 34 35 0x0190: 37 2d 30 32 56 30 32 20 : 01 00 46 00 00 00 00 b0 0x01a0: 00 00 00 00 00 00 00 00 : 00 00 8c dd 94 00 ac a5 0x01b0: d6 cd 00 00 1e 00 50 3e : 11 70 0f 2d 00 00 aa aa 0x01c0: 53 46 50 2d 31 30 47 2d : 4c 52 20 20 20 20 20 20 0x01d0: 20 20 20 20 32 33 00 00 : 00 00 00 00 00 00 00 2e 0x01e0: 20 26 2b 30 33 36 2b 36 : 00 00 00 00 00 00 00 00 0x01f0: 00 00 00 00 00 6b 00 00 : ff ff ff ff 00 00 00 00
Maybe this is the problem ?
On Fri, Jul 26, 2019 at 11:26 AM Klimek, Denis via observium < observium@observium.org> wrote:
@Edvinas: As you see: Your optic is not transmitting any information for those values. Or you entered wrong command on Cisco CLI ;-) Also your debug log from ./discovery is too small. Looks like you removed most of the information....
Mit freundlichem Gruß Stadtwerke Norderstedt
Denis Klimek
Professional Network Engineer IP-Systemtechnik
Tel: 040 / 521 04 – 1049 Mobil: 0151 / 652 219 06
dklimek@stadtwerke-norderstedt.de www.stadtwerke-norderstedt.de
-----Ursprüngliche Nachricht----- Von: observium [mailto:observium-bounces@observium.org] Im Auftrag von emilio brambilla via observium Gesendet: Freitag, 26. Juli 2019 09:20 An: observium@observium.org Cc: emilio brambilla Betreff: Re: [Observium] Question about health graphs on IOS-XR
hello,
On 26/07/2019 08:49, Edvinas Kairys via observium wrote:
hello !
/opt/observium/discovery.php -h ny2asr01 -m sensors –d
don't know if it's the same problem or a different one, but as we have sensors involved I'm adding this:
since 2019-07-14, after upgrade to r9962, our observium instance lost all temperature sensors on all cisco devices (many cisco switch and routers with both ios and iosxr)
it is still graphing other brands devices temperatures.
--
bye,
emilio
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium