On 13 Jul 2017, at 15:13, John Klasa <John.Klasa@itiviti.com> wrote:

Hi, thanks for that. It says this.

Performance & Output
RRDTool Output: ERROR: for a logarithmic yaxis you must specify a lower-limit > 0
RRDtool Runtime: 0.013s | Total time: 0.014s

Any suggestion?


John Klasa
Managed Services • Itiviti
Senior Network Administrator

From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong
Sent: den 13 juli 2017 15:54
To: 'Observium' <observium@observium.org>
Subject: Re: [Observium] Juniper SRX340

If you click on a graph to get to the graph browser there's an option on the right hand side to show the rrd command.
This will also show you whatever error is causing that graph to not be generated.
Adam.
Sent from http://www.bluemail.me/r?b=10066 
On 13 Jul 2017, at 14:40, John Klasa <mailto:John.Klasa@itiviti.com> wrote:
Hi, I have an issue with a SRX340 device running 15.1X49-D90 and it seems to poll sessions from the device but Observium is unable to graph and draw the graphs? 
Looks like this. 


Any debugging I can do to find out? I did a poller –dd and it looks like this:
 
less /var/tmp/fw5.log | egrep -i session 
 
SQL[SELECT @@SESSION.sql_mode;]
SQL[SELECT @@SESSION.sql_mode;]
jnxJsSPUMonitoringCurrentFlowSession.0 = 184
jnxJsSPUMonitoringMaxFlowSession.0 = 262144
jnxJsSPUMonitoringCurrentCPSession.0 = 0
jnxJsSPUMonitoringMaxCPSession.0 = 0
              [jnxJsSPUMonitoringCurrentFlowSession] => string(3) "184"
              [jnxJsSPUMonitoringMaxFlowSession]     => string(6) "262144"
              [jnxJsSPUMonitoringCurrentCPSession]   => string(1) "0"
              [jnxJsSPUMonitoringMaxCPSession]       => string(1) "0"
ds[CurrentFlowSession].index = 0
ds[CurrentFlowSession].type = "GAUGE"
ds[CurrentFlowSession].minimal_heartbeat = 600
ds[CurrentFlowSession].min = 0.0000000000e+00
ds[CurrentFlowSession].max = 1.0000000000e+11
ds[CurrentFlowSession].last_ds = "195"
ds[CurrentFlowSession].value = 1.1503313835e+04
ds[CurrentFlowSession].unknown_sec = 0
ds[MaxFlowSession].index = 1
ds[MaxFlowSession].type = "GAUGE"
ds[MaxFlowSession].minimal_heartbeat = 600
ds[MaxFlowSession].min = 0.0000000000e+00
ds[MaxFlowSession].max = 1.0000000000e+11
ds[MaxFlowSession].last_ds = "262144"
ds[MaxFlowSession].value = 1.5464229241e+07
ds[MaxFlowSession].unknown_sec = 0
ds[CurrentCPSession].index = 2
ds[CurrentCPSession].type = "GAUGE"
ds[CurrentCPSession].minimal_heartbeat = 600
ds[CurrentCPSession].min = 0.0000000000e+00
ds[CurrentCPSession].max = 1.0000000000e+11
ds[CurrentCPSession].last_ds = "0"
ds[CurrentCPSession].value = 0.0000000000e+00
ds[CurrentCPSession].unknown_sec = 0
ds[MaxCPSession].index = 3
ds[MaxCPSession].type = "GAUGE"
ds[MaxCPSession].minimal_heartbeat = 600
ds[MaxCPSession].min = 0.0000000000e+00
ds[MaxCPSession].max = 1.0000000000e+11
ds[MaxCPSession].last_ds = "0"
ds[MaxCPSession].value = 0.0000000000e+00
ds[MaxCPSession].unknown_sec = 0
    'CurrentFlowSession' => array('label' => 'CurrentFlowSession'),
    'MaxFlowSession' => array('label' => 'MaxFlowSession'),
    'CurrentCPSession' => array('label' => 'CurrentCPSession'),
    'MaxCPSession' => array('label' => 'MaxCPSession'),
                        fdb_count,jnxJsSPUMonitoringFlowSessions, jnxJsSPUMonitoringCPSessions, poller_perf
 
It seems Observium is getting the value from the device? 
 
Regards
 
-John


observium mailing list
mailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium