Hi Adam
There are various devices, Rocket M5, Powerbeam M5, Airfiber 5X and 5XHD as well as a number of AC versions and LTU radios
They all seem to show the MAC addresses under iso.3.6.1.2.1.2.2.1.6.4
snmpwalk -v1 -c "SNMPKEY" 172.22.69.10 iso.3.6.1.2.1.2.2.1.6.4
iso.3.6.1.2.1.2.2.1.6.4 = Hex-STRING: E0 63 DA BF 8F 56
E0 63 DA BF 8F 56 is the WLAN0 MAC Addr. Which is the Ubiquity Serial number, at least for the radios. I am not 100% sure is this it the correct field but testing over multiple radio versions it does seem to always show the correct MAC / Serial
Not sure if that helps you to help me at all?
From: observium <observium-bounces@observium.org> on behalf of adama--- via observium <observium@observium.org>
Reply to: Observium <observium@observium.org>
Date: Monday, 25 April 2022 at 17:51
To: 'Observium' <observium@observium.org>
Cc: <adama@observium.org>
Subject: Re: [Observium] Ubiquity Serial Numbers / Wireless (WLAN) mac
We have a few OIDs to get serials from various bits of ubnt kit.
Where is it in SNMP on your devices? What are they?
Adam.
From: observium <observium-bounces@observium.org> On Behalf Of Lyndon Labuschagne via observium
Sent: 25 April 2022 16:10
To: observium@observium.org
Cc: Lyndon Labuschagne <lyndonl@mobiletorque.co.za>
Subject: [Observium] Ubiquity Serial Numbers / Wireless (WLAN) mac
Hi
A few years ago we were able to pull the Ubiquiti Radio MAC / Serial numbers from the Observium DB.
I no longer see any serial numbers listed for Ubiquiti devices if I query the device table in the DB directly, and it’s not shown on the device screen in the Observium interface.
When running a manual poller.php run the serial number field is <empty>, Is there something that changed on the Observium or Ubiquiti side or is the a module that I may need to enable?
Any ideas or input would be welcome.
Regards
Lyndon
_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium