Hello,
Thank you for the quick response.
Possibly. The sensors are not currently failing, so I cannot verify for certain, but there is some sensor related output available via SNMP, from the IPMI interface of at least one of the machines, that looks similar to the sensors that were reported as failing in the IPMI output.
Regards,
________________________________________ From: Klimek, Denis DKlimek@Stadtwerke-Norderstedt.de Sent: Tuesday, March 22, 2022 15:16 To: Observium Cc: Karl-André Skevik Subject: AW: IPMI discrete unit sensors
[You don't often get email from dklimek@stadtwerke-norderstedt.de. Learn why this is important at http://aka.ms/LearnAboutSenderIdentification.]
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
Hi,
Are those information also exposed via SNMP from the IPMI device?
Mit freundlichem Gruß wilhelm.tel GmbH
Denis Klimek
Carrier Manager & Professional Network Engineer IP-Systemtechnik
Tel: +49 (0) 40 / 521 04 – 1049 -> Work From Home Mobil: +49 (0) 151 / 652 219 06
dklimek@stadtwerke-norderstedt.de https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.wilhelm...
______________________________________________
Postanschrift: wilhelm.tel GmbH Heidbergstraße 101-111 22846 Norderstedt
Geschäftsführer: Jens Seedorff, Theo Weirich Vorsitzender des Aufsichtsrats: Christoph Mendel Handelsregister: HRB 4216 NO, Amtsgericht Kiel Umsatzsteuer ID: DE 81 299 7663
-----Ursprüngliche Nachricht----- Von: observium observium-bounces@observium.org Im Auftrag von Karl-André Skevik via observium Gesendet: Dienstag, 22. März 2022 15:12 An: observium@observium.org Cc: Karl-André Skevik karlas@nr.no Betreff: [Observium] IPMI discrete unit sensors
Hello,
We have several machines with IPMI configured in observium. Some of these machines have had hardware failures, such as power supply or disk failures, and we can see the failure status when polling the machines via ipmitool, but there are no warnings reported by observium. The unit of these sensor values is "discrete".
Does observium support this type of sensor, and if so, is it possible to configure observium to warn about failures in these sensors?
Regards, _______________________________________________ observium mailing list observium@observium.org https://eur01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fpostman.mem...