Does anyone else have a three phase ups. I was wanting to know if it is using the UPS-MIB and that you've done something to get all three phases shown as graphs ?
I've done a debug on the discovery and it is clear that all phases are returned by the bulkwalk statements.
so far i've created ./html/images/os/emerson.png and ./includes/polling/os/emerson.inc.php and added to my config.php the following: $os = "emerson"; $config['os'][$os]['text'] = "Emerson UPS"; $config['os'][$os]['type'] = "power"; $config['os'][$os]['over'][0]['graph'] = "device_voltage"; $config['os'][$os]['over'][0]['text'] = "Voltage"; $config['os'][$os]['over'][1]['graph'] = "device_current"; $config['os'][$os]['over'][1]['text'] = "Current"; $config['os'][$os]['over'][2]['graph'] = "device_frequency"; $config['os'][$os]['over'][2]['text'] = "Frequency"; $config['os'][$os]['sysObjectID'][] = ".1.3.6.1.2.1.33"; $config['os'][$os]['mibs'][] = "UPS-MIB";
root@dc3monitor2:/opt/observium# snmpwalk dc6ups01 -v2c -c xxxxx -M /opt/observium/mibs -m UPS-MIB upsMIB UPS-MIB::upsIdentManufacturer.0 = STRING: Chloride UPS-MIB::upsIdentModel.0 = STRING: 80Net UPS-MIB::upsIdentUPSSoftwareVersion.0 = STRING: 10h01517 V4.00.100312 (5135) / 10h01531 V1.10.100326,10h01530 V UPS-MIB::upsIdentAgentSoftwareVersion.0 = STRING: 3.15.3397 UPS-MIB::upsIdentName.0 = STRING: dc6ups01 UPS-MIB::upsIdentAttachedDevices.0 = STRING: none UPS-MIB::upsBatteryStatus.0 = INTEGER: batteryNormal(2) UPS-MIB::upsSecondsOnBattery.0 = INTEGER: 0 seconds UPS-MIB::upsEstimatedMinutesRemaining.0 = INTEGER: 164 minutes UPS-MIB::upsEstimatedChargeRemaining.0 = INTEGER: 100 percent UPS-MIB::upsBatteryVoltage.0 = INTEGER: 5440 0.1 Volt DC UPS-MIB::upsBatteryCurrent.0 = INTEGER: 2 0.1 Amp DC UPS-MIB::upsBatteryTemperature.0 = INTEGER: 19 degrees Centigrade UPS-MIB::upsInputLineBads.0 = Counter32: 56 UPS-MIB::upsInputNumLines.0 = INTEGER: 3 UPS-MIB::upsInputFrequency.1 = INTEGER: 499 0.1 Hertz UPS-MIB::upsInputFrequency.2 = INTEGER: 499 0.1 Hertz UPS-MIB::upsInputFrequency.3 = INTEGER: 499 0.1 Hertz UPS-MIB::upsInputVoltage.1 = INTEGER: 245 RMS Volts UPS-MIB::upsInputVoltage.2 = INTEGER: 245 RMS Volts UPS-MIB::upsInputVoltage.3 = INTEGER: 243 RMS Volts UPS-MIB::upsInputCurrent.1 = INTEGER: 30 0.1 RMS Amp UPS-MIB::upsInputCurrent.2 = INTEGER: 30 0.1 RMS Amp UPS-MIB::upsInputCurrent.3 = INTEGER: 31 0.1 RMS Amp UPS-MIB::upsInputTruePower.1 = INTEGER: 7500 Watts UPS-MIB::upsInputTruePower.2 = INTEGER: 7500 Watts UPS-MIB::upsInputTruePower.3 = INTEGER: 7700 Watts UPS-MIB::upsOutputSource.0 = INTEGER: normal(3) UPS-MIB::upsOutputFrequency.0 = INTEGER: 499 0.1 Hertz UPS-MIB::upsOutputNumLines.0 = INTEGER: 3 UPS-MIB::upsOutputVoltage.1 = INTEGER: 241 RMS Volts UPS-MIB::upsOutputVoltage.2 = INTEGER: 239 RMS Volts UPS-MIB::upsOutputVoltage.3 = INTEGER: 239 RMS Volts UPS-MIB::upsOutputCurrent.1 = INTEGER: 384 0.1 RMS Amp UPS-MIB::upsOutputCurrent.2 = INTEGER: 288 0.1 RMS Amp UPS-MIB::upsOutputCurrent.3 = INTEGER: 328 0.1 RMS Amp UPS-MIB::upsOutputPower.1 = INTEGER: 7900 Watts UPS-MIB::upsOutputPower.2 = INTEGER: 6200 Watts UPS-MIB::upsOutputPower.3 = INTEGER: 7200 Watts UPS-MIB::upsOutputPercentLoad.1 = INTEGER: 27 percent UPS-MIB::upsOutputPercentLoad.2 = INTEGER: 20 percent UPS-MIB::upsOutputPercentLoad.3 = INTEGER: 23 percent UPS-MIB::upsAlarmsPresent.0 = Gauge32: 0 UPS-MIB::upsTestId.0 = OID: UPS-MIB::upsTestNoTestsInitiated UPS-MIB::upsTestSpinLock.0 = INTEGER: 53 UPS-MIB::upsTestResultsSummary.0 = INTEGER: 1082939236 UPS-MIB::upsTestResultsDetail.0 = STRING: UPS-MIB::upsTestStartTime.0 = Timeticks: (0) 0:00:00.00 UPS-MIB::upsTestElapsedTime.0 = Wrong Type (should be INTEGER): Timeticks: (654440200) 75 days, 17:53:22.00 UPS-MIB::upsShutdownType.0 = INTEGER: 0 UPS-MIB::upsShutdownAfterDelay.0 = INTEGER: 0 seconds UPS-MIB::upsStartupAfterDelay.0 = INTEGER: 0 seconds UPS-MIB::upsRebootWithDuration.0 = INTEGER: 0 seconds UPS-MIB::upsAutoRestart.0 = INTEGER: 0 UPS-MIB::upsConfigInputVoltage.0 = INTEGER: 240 RMS Volts UPS-MIB::upsConfigInputFreq.0 = INTEGER: 500 0.1 Hertz UPS-MIB::upsConfigOutputVoltage.0 = INTEGER: 240 RMS Volts UPS-MIB::upsConfigOutputFreq.0 = INTEGER: 500 0.1 Hertz UPS-MIB::upsConfigOutputVA.0 = INTEGER: 99900 Volt-Amps UPS-MIB::upsConfigOutputPower.0 = INTEGER: 90000 Watts UPS-MIB::upsConfigLowBattTime.0 = INTEGER: 0 minutes UPS-MIB::upsConfigAudibleStatus.0 = INTEGER: 0 UPS-MIB::upsConfigLowVoltageTransferPoint.0 = INTEGER: 168 RMS Volts UPS-MIB::upsConfigHighVoltageTransferPoint.0 = INTEGER: 274 RMS Volts
thanks
Peter Hine Senior Technical Support Engineer (Servers) FCoA ITS peter.hine@familycourt.gov.au
********************************************************************** The information contained in this e-mail (including any attachments) is for the exclusive use of the addressee. If you are not the intended recipient please notify the sender immediately and delete this e-mail. It is noted that legal privilege is not waived because you have read this e-mail. **********************************************************************