Yes it does. On your device page on the right side under “Temperature”, you’ll have the expected “Battery” entry which represents the obvious, and then you’ll have a second entry which represents the temperature probe. 

On an AP9619, that entry will be listed as “Integrated”.

On an AP9631, that entry will be listed as “Port 1 Temp 1”.

At least that’s what I’m seeing on my 15 APC UPS units…  :D

…Ron

From: observium [mailto:observium-bounces@observium.org] On Behalf Of Vincent Aniello
Sent: Sunday, June 07, 2015 7:20 PM
To: observium@observium.org
Subject: [Observium] Environmental monitoring on an APC Smart-UPS

I have an APC Smart-UPS 1500 with a network management card that includes environmental monitoring.  When Observium discovers the device the battery temperature is displayed, but not the temperature from the probe connected to the management card.  Does Observium have the ability to show the temperature from the probe on the management card?

Thanks.

--Vincent

--
This message has been scanned for viruses and dangerous content by
E.F.A. Project, and is believed to be clean.
Click here to report this message as spam.