I assume that this would be the interface name on a Mikrotik and not a Label I didn’t see any specifics around this on the documentation
/interface ethernet> print Flags: X - disabled, R - running, S - slave # NAME MTU MAC-ADDRESS ARP SWITCH 0 RS Core: sfp-sfpplus1- Trunk to 6509 2000 4C:5E:0C:13:CB:B1 enabled 1 R Core: sfp-sfpplus2 - Link to DC9 2000 4C:5E:0C:13:CB:B2 enabled
vs the Cisco version which does work as expected
interface TenGigabitEthernet3/7 description TRUNK TO 7600 - TenG4/8 switchport switchport trunk encapsulation dot1q
On 31 Jan 2019, at 12:21, Mike Stupalov mike@observium.org wrote:
Are you sure that correctly configured ports on device?
Show your config for an port for example..
Lyndon Labuschagne wrote on 31.01.19 11:42:
Ok,
So the info is now correct, Observium is now showing the port description as Core: not CoreCore:
But as yet I am not seeing the port listed under Core ports in Observium. or Transit or Peering etc.
On 30 Jan 2019, at 22:56, Mike Stupalov <mike@observium.org mailto:mike@observium.org> wrote:
Ok, should be fixed in r9696.
But this is veeeery strange port ifDescr.
Lyndon Labuschagne via observium wrote on 30/01/2019 14:29:
Great Thanks 👍
On 30 Jan 2019, at 13:28, Adam Armstrong via observium observium@observium.org mailto:observium@observium.org wrote:
Hmm. Mike probably needs to look at this, since the rewriting code is his 😊
Adam.
-----Original Message----- From: observium observium-bounces@observium.org mailto:observium-bounces@observium.org On Behalf Of Lyndon Labuschagne via observium Sent: 30 January 2019 11:20 To: Observium observium@observium.org mailto:observium@observium.org Cc: Lyndon Labuschagne lyndonl@mobiletorque.co.za mailto:lyndonl@mobiletorque.co.za; adama@memetic.org mailto:adama@memetic.org Subject: Re: [Observium] Port label parsing - Mikrotik possible bug?
##### Module Start: ports #####
o Caching Oids ifDescr ifType ifOperStatus ifAlias ifName ifHighSpeed ifInMulticastPkts ifOutMulticastPkts ifInBroadcastPkts ifOutBroadcastPkts ifHCInOctets ifHCOutOctets ifHCInUcastPkts ifHCOutUcastPkts ifHCInMulticastPkts ifHCOutMulticastPkts ifHCInBroadcastPkts ifHCOutBroadcastPkts ifInOctets ifOutOctets ifInUcastPkts ifOutUcastPkts ifInNUcastPkts ifOutNUcastPkts ifInDiscards ifOutDiscards ifInErrors ifOutErrors ifInUnknownProtos ifMtu ifSpeed ifPhysAddress ifAdminStatus ifLastChange ifPromiscuousMode ifConnectorPresent, ifIndex: 1 2 3 4 5 6 7 8 10 12 13 14 15 16 17 18 19 20 21 22 23 25 26 27 28 29 30 31 32 33 34 35 36 37 o ADSL-LINE-MIB o EtherLike-MIB dot3StatsDuplexStatus o IP-MIB
Port Disabled. +---------+---------------------------+---------------------------+---------+----------+----------+---------+----------+--------+---------+----+ | ifIndex | Label | Type | Speed | BPS In | BPS Out | Data In | Data Out | PPS In | PPS Out | HC | +---------+---------------------------+---------------------------+---------+----------+----------+---------+----------+--------+---------+----+ | 1 | CoreCore: sfp-sfpplus1- T | Ethernet | 10Gbps | 1.32Gbps | 287Mbps | 12.1GB | 2.64GB | 147k | 110k | Y | | | runk to 6509 | | | | | | | | | | | 2 | CoreCore: sfp-sfpplus2 - | Ethernet | 1Gbps | 15.8Mbps | 40.2Mbps | 149MB | 378MB | 4.64k | 5.85k | Y | | | Link to DC9 | | | | | | | | | | | 3 | CoreCore: sfp-sfpplus3 DF | Ethernet | 1Gbps | 47.6Mbps | 219Mbps | 448MB | 2.02GB | 16.1k | 22.3k | Y |
On 30 Jan 2019, at 13:18, Adam Armstrong via observium observium@observium.org mailto:observium@observium.org wrote:
What is an "ifIndex listing"?
Adam.
-----Original Message----- From: observium observium-bounces@observium.org mailto:observium-bounces@observium.org On Behalf Of Lyndon Labuschagne via observium Sent: 30 January 2019 11:11 To: Observium observium@observium.org mailto:observium@observium.org Cc: Lyndon Labuschagne lyndonl@mobiletorque.co.za mailto:lyndonl@mobiletorque.co.za Subject: [Observium] Port label parsing - Mikrotik possible bug?
Hi
I have picked up that the port cable parsing does not seem to work on Mikrotik routers,
a port description of
Core: sfp-sfpplus1- Trunk to 6509
becomes
CoreCore: sfp-sfpplus1- Trunk to 6509
An SNMP walk gives be the below
iso.3.6.1.2.1.2.2.1.2.1 = STRING: "Core: sfp-sfpplus1- Trunk to 6509" iso.3.6.1.2.1.31.1.1.1.1.1 = STRING: "Core: sfp-sfpplus1- Trunk to 6509" iso.3.6.1.2.1.55.1.5.1.2.1 = STRING: "Core: sfp-sfpplus1- Trunk to 6509”
If I run a poller on the device, the “Descr” under the sensors display shows the correct "Core: sfp-sfpplus1- Trunk to 6509” but later on under the ifIndex listing the Label there is CoreCore: sfp-sfpplus1- Trunk to 6509
Regards _______________________________________________ observium mailing list observium@observium.org mailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org mailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org mailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org mailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org mailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalov Observium Limited, http://observium.org http://observium.org/
-- Mike Stupalov Observium Limited, http://observium.org http://observium.org/