I have just added a Juniper EX4200 to my kit then added it into Observium, however for some reason it does not list the ports. The JunOS is the same version as my other switches which are fine and if I discover the switch manually on CLI by device ID it appears to retrieve them fine.

I have checked the SNMP config of the device against my other ones and they are the same so assume it is maybe something else.

Any tips on how to resolve this would be appreciated.

Discovery Output is as follows...

Module [ os ] time: 0.0334s
Ports : X dsc(5)[] lo0(6)[] tap(7)[] gre(8)[] ipip(9)[] pime(10)[] pimd(11)[] mtun(12)[] lo0.0(16)[] lo0.16384(21)[] me0(33)[] me0.0(34)[] vme(35)[] vme.0(36)[] bme0(37)[] bme0.32768(38)[] bme0.32770(40)[] vcp-0(49)[] vcp-0.32768(50)[] vcp-1(51)[] vcp-1.32768(52)[] vlan(501)[] ge-0/0/0(502)[] ge-0/0/0.0(503)[] ge-0/0/1(504)[] ge-0/0/1.0(505)[] ge-0/0/2(506)[] ge-0/0/2.0(507)[] ge-0/0/3(508)[] ge-0/0/3.0(509)[] ge-0/0/4(510)[] ge-0/0/4.0(511)[] ge-0/0/5(512)[] ge-0/0/5.0(513)[] ge-0/0/6(514)[] ge-0/0/7(515)[] ge-0/0/6.0(516)[] ge-0/0/7.0(517)[] ge-0/0/8(518)[] ge-0/0/8.0(519)[] ge-0/0/9(520)[] ge-0/0/9.0(521)[] ge-0/0/10(522)[] ge-0/0/11(523)[] ge-0/0/10.0(524)[] ge-0/0/11.0(525)[] ge-0/0/12(526)[] ge-0/0/12.0(527)[] ge-0/0/13(528)[] ge-0/0/14(529)[] ge-0/0/13.0(530)[] ge-0/0/14.0(531)[] ge-0/0/15(532)[] ge-0/0/15.0(533)[] ge-0/0/16(534)[] ge-0/0/16.0(535)[] ge-0/0/17(536)[] ge-0/0/17.0(537)[] ge-0/0/18(538)[] ge-0/0/18.0(539)[] ge-0/0/19(540)[] ge-0/0/20(541)[] ge-0/0/19.0(542)[] ge-0/0/20.0(543)[] ge-0/0/21(544)[] ge-0/0/21.0(545)[] ge-0/0/22(546)[] ge-0/0/23(547)[] ge-0/0/22.0(548)[] ge-0/0/23.0(549)[] ge-0/0/24(550)[] ge-0/0/24.0(551)[] ge-0/0/25(552)[] ge-0/0/25.0(553)[] ge-0/0/26(554)[] ge-0/0/26.0(555)[] ge-0/0/27(556)[] ge-0/0/27.0(557)[] ge-0/0/28(558)[] ge-0/0/28.0(559)[] ge-0/0/29(560)[] ge-0/0/30(561)[] ge-0/0/31(562)[] ge-0/0/29.0(563)[] ge-0/0/30.0(564)[] ge-0/0/31.0(565)[] ge-0/0/32(566)[] ge-0/0/32.0(567)[] ge-0/0/33(568)[] ge-0/0/34(569)[] ge-0/0/33.0(570)[] ge-0/0/34.0(571)[] ge-0/0/35(572)[] ge-0/0/35.0(573)[] ge-0/0/36(574)[] ge-0/0/37(575)[] ge-0/0/36.0(576)[] ge-0/0/37.0(577)[] ge-0/0/38(578)[] ge-0/0/38.0(579)[] ge-0/0/39(580)[] ge-0/0/40(581)[] ge-0/0/39.0(582)[] ge-0/0/40.0(583)[] ge-0/0/41(584)[] ge-0/0/41.0(585)[] ge-0/0/42(586)[] ge-0/0/43(587)[] ge-0/0/44(588)[] ge-0/0/42.0(589)[] ge-0/0/43.0(590)[] ge-0/0/44.0(591)[] ge-0/0/45(592)[] ge-0/0/45.0(593)[] ge-0/0/46(594)[] ge-0/0/46.0(595)[] xe-0/1/0(598)[] xe-0/1/0.0(599)[] vlan.0(600)[] gr-0/0/47(603)[] gr-0/0/47.0(604)[] vlan.100(605)[] vlan.199(606)[] vlan.302(607)[] vlan.304(608)[]

Module [ ports ] time: 1.5604s
Port Stacks: ....................................................................................................................................................................................................

Module [ ports-stack ] time: 0.6286s
Processors : JUNIPER-MIB .. JUNIPER-SRX5000-SPU-MONITORING-MIB hrDevice:

Module [ processors ] time: 0.9984s
Memory : JUNIPER-MIB .. JUNIPER-SRX5000-SPU-MONITORING-MIB HOST-RESOURCES-MIB

Module [ mempools ] time: 1.4283s
IPv4 Addresses :

Module [ ipv4-addresses ] time: 0.1158s
IPv6 Addresses :

Module [ ipv6-addresses ] time: 0.2653s
Sensors & Status: JUNIPER-MIB .. JUNIPER-ALARM-MIB .. JUNIPER-DOM-MIB

Module [ sensors ] time: 2.644s
Storage : HOST-RESOURCES-MIB ......

Module [ storage ] time: 0.052s
Inventory : JUNIPER-MIB HOST-RESOURCES-MIB
Module [ inventory ] stats: 11 added
Module [ inventory ] time: 2.9178s
Discovery protocols: LLDP-MIB CISCO-CDP-MIB

Module [ discovery-protocols ] time: 0.2521s
OSPF Neighbours:

Module [ ospf-autodiscovery ] time: 0.0655s
ARP/NDP Tables :

Module [ arp-table ] time: 0.3335s

Module [ junose-atm-vp ] time: 0.0003s
BGP Sessions: BGP4-V2-MIB-JUNIPER No BGP on host

Module [ bgp-peers ] time: 0.0221s
VLANs:
Q-BRIDGE-MIB 0 100 199 302 304
Module [ vlans ] stats: 0[V+] 100[V+] 199[V+] 302[V+] 304[V+]

Module [ vlans ] time: 0.4547s

Module [ mac-accounting ] time: 0.0003s
Pseudowires : PW-STD-MIB
Module [ pseudowires ] time: 0.0388s
VRFs :

Module [ cisco-vrf ] time: 0.1992s

Module [ cisco-sla ] time: 0.0006s

Module [ vmware-vminfo ] time: 0.0005s
Cisco Class-based QoS: QoS not configured.

Module [ cisco-cbqos ] time: 0.1115s

Module [ libvirt-vminfo ] time: 0.0005s

Module [ toner ] time: 0.0004s
UCD Disk IO :

Module [ ucd-diskio ] time: 0.0379s
Wifi:

Module [ wifi ] time: 0.0088s

Module [ graphs ] time: 0.0072s
Device [ ahostnamehere ] discovered in 12.18 seconds

Memory usage: 5MB (peak: 5.25MB)
MySQL: Cell[349/0.17s] Row[150/0.11s] Rows[10/0.01s] Column[0/0s] Update[1/0s] Insert[144/0.15s] Delete[0/0s]