Hi,
We already discover and poll these processors correctly. If you don't want alerts for specific types of processor, filter them in your alert checker config.
Observium is only generating alerts for the things you have told it to generate alerts for.
For example :
+------------------------+-------+---------+-------+
| Label | Type | Index | Usage |
+------------------------+-------+---------+-------+
| node0 FPC: FPC @ 0/*/* | junos | 7.1.0.0 | 0% |
| node0 FPC: FPC @ 2/*/* | junos | 7.3.0.0 | 0% |
| node0 Routing Engine | junos | 9.1.0.0 | 34% |
| node0 SPC slot 0 | junos | 0 | 0% |
| node1 SPC slot 0 | junos | 18 | 0% |
+------------------------+-------+---------+-------+
The first 3 are jnxOperatingCPU:
jnxOperatingDRAMSize.7.1.0.0 = 0
jnxOperatingDRAMSize.7.3.0.0 = 0
jnxOperatingDRAMSize.9.1.0.0 = 0
jnxOperatingDescr.7.1.0.0 = node0 FPC: FPC @ 0/*/*
jnxOperatingDescr.7.3.0.0 = node0 FPC: FPC @ 2/*/*
jnxOperatingDescr.9.1.0.0 = node0 Routing Engine
The final 2 are jnxJsSPUMonitoringCPUUsage (the OID you give above):
jnxJsSPUMonitoringNodeDescr.0 = node0
jnxJsSPUMonitoringNodeDescr.18 = node1
jnxJsSPUMonitoringCPUUsage.0 = 0
jnxJsSPUMonitoringCPUUsage.18 = 0
Unfortunately for legacy reasons they have the same type of "junos", which may make it slightly more complex to filter them.
adam.
On 2017-10-23 15:12:08, aas029 <aas029@yahoo.com> wrote:
I have Juniper SRX1500 firewalls for which Observium is sending false positive CPU alerts (example included below) based on feedback from Juniper.
More specifically, I was told that the OIDs used by Observium to collect CPU information are not the correct ones for this devices in particular.
Here are the OIDs that I was told should be used to monitor the data plane CPU usage (instead of the standard OIDs that poll the kernel):
.1.3.6.1.4.1.2636.3.39.1.12.1.1.1Or more specifically for forwarding plane flow (SPU) only:.1.3.6.1.4.1.2636.3.39.1.12.1.1.1.3"
Here is an Observium alert example:
|
Alert
|
Juniper Firewall CPU Usage is over 40%!
|
|
Entity
|
FPC: FEB @0/*/*
|
|
Conditions
|
processor_usage gt 40 (49)
|
|
Metrics
|
processor_usage = 49
|
|
Duration
|
4m 19s (2017-10-22 17:22:53)
|
|
Device
|
|
Device
|
host.mine
|
|
Hardware
|
SRX1500
|
|
Operating System
|
Juniper JunOS 15.1X49-D50.3 Internet Router
|
|
Location
|
lab
|
|
Uptime
|
27 days, 12h 3m 4s
|
The above alert is seen several times a day per device. I'm currently running version 17.10.8921 (Linux 2.6.32-642.13.1.el6.x86_64 [amd64]) but have seen this with different frequencies on all other versions I had.
Appreciate any information on potential fix or workaround or feedback on the Juniper response.
Thanks,
Al.