Re: [Observium] APC ATS - continued

- try switch to SNMP v2c (I sure your device support it) - write TAC to vendor - downgrade firmware :)

I tested on another ATS device and not see issue.

Jacek.Dabrowski@selgros.pl wrote:

hmm I'm afraid you can be right, but unfortunately I'm using the latest version available.

Pozdrawiam

Jacek Dąbrowski

*From:*Mike Stupalov mike@stupalov.ru *On Behalf Of *Mike Stupalov *Sent:* Friday, August 31, 2018 2:27 PM *To:* Dąbrowski Jacek Jacek.Dabrowski@selgros.pl *Cc:* observium@observium.org *Subject:* Re: [Observium] APC ATS - continued

This is firmware/hardware issue, try to upgrade device firmware.

SNMPv2-MIB does not matter here, since in poller all oids requested by numeric oids.

When walked (snmpwalk) table - value returned, when try to snmpget specific oid - return error.

Jacek.Dabrowski@selgros.pl mailto:Jacek.Dabrowski@selgros.pl wrote:

Done, I see all the time SNMPv2-MIB no PowerNet-MIB in poller.

SNMPv2-MIB its wrong mib for this device.

Pozdrawiam

Jacek Dąbrowski


*From:*Mike Stupalov <mike@stupalov.ru> <mailto:mike@stupalov.ru>
*On Behalf Of *Mike Stupalov
*Sent:* Friday, August 31, 2018 1:36 PM
*To:* Observium <observium@observium.org>
<mailto:observium@observium.org>; Dąbrowski Jacek
<Jacek.Dabrowski@selgros.pl> <mailto:Jacek.Dabrowski@selgros.pl>
*Subject:* Re: [Observium] APC ATS - continued

Hi,

 please attach output for poller debug:

./poller.php -d -m sensors -h <device>



    Jacek.Dabrowski@selgros.pl <mailto:Jacek.Dabrowski@selgros.pl>

    31 August 2018 at 12:21

    Hello Adam,

    My Observium now:

    *Observium*

    	

    18.8.9403 (27th August 2018)

    But in GUI nothing has changed, new debug in the attachments.

    Pozdrawiam

    Jacek Dąbrowski



    *From:*observium <observium-bounces@observium.org>
    <mailto:observium-bounces@observium.org> *On Behalf Of *Adam
    Armstrong
    *Sent:* Wednesday, August 29, 2018 8:16 PM
    *To:* observium@observium.org <mailto:observium@observium.org>
    *Subject:* Re: [Observium] APC ATS - continued

    I checked locally on an ATS system before I noticed the
    version was old, and those OIDs used in the poller are
    correct, so it is probably a bug that was fixed.

    adam.




    _______________________________________________
    observium mailing list
    observium@observium.org <mailto:observium@observium.org>
    http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

    Adam Armstrong <mailto:adama@memetic.org>

    29 August 2018 at 21:16

    I checked locally on an ATS system before I noticed the
    version was old, and those OIDs used in the poller are
    correct, so it is probably a bug that was fixed.

    adam.

    _______________________________________________
    observium mailing list
    observium@observium.org <mailto:observium@observium.org>
    http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

    Jacek.Dabrowski@selgros.pl <mailto:Jacek.Dabrowski@selgros.pl>

    29 August 2018 at 21:02

    OK, I will check soon in the new version.

    Pozdrawiam

    Jacek Dąbrowski



    *From:*observium <observium-bounces@observium.org>
    <mailto:observium-bounces@observium.org> *On Behalf Of *Adam
    Armstrong
    *Sent:* Wednesday, August 29, 2018 6:35 PM
    *To:* observium@observium.org <mailto:observium@observium.org>
    *Subject:* Re: [Observium] APC ATS - continued

    Last Changed Rev: 9073

    Last Changed Date: 2018-03-02 23:37:46 +0100 (Fri, 02 Mar 2018)

    Please don't report issues with ancient versions.

    Thanks,

    adam.




    _______________________________________________
    observium mailing list
    observium@observium.org <mailto:observium@observium.org>
    http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

    Adam Armstrong <mailto:adama@memetic.org>

    29 August 2018 at 19:34

    Last Changed Rev: 9073

    Last Changed Date: 2018-03-02 23:37:46 +0100 (Fri, 02 Mar 2018)

    Please don't report issues with ancient versions.

    Thanks,

    adam.

    _______________________________________________
    observium mailing list
    observium@observium.org <mailto:observium@observium.org>
    http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

    Jacek.Dabrowski@selgros.pl <mailto:Jacek.Dabrowski@selgros.pl>

    29 August 2018 at 19:03

    Hello,

    I am coming back with the topic of APC ATS, maybe someone will
    help.

    The subject of the correct voltage after the discovery, the
    value is correct, when pooler finish working the value disappears.

    As I noticed during the discovery, is viewed source in
    *PowerNet-MIB* in debug mode , the pooler process in debug is
    searched in *SNMPv2-MIB* !!!

    Is it some bug ?

    Details in the attachments.

    Regards

    Jacek Dąbrowski






    _______________________________________________
    observium mailing list
    observium@observium.org <mailto:observium@observium.org>
    http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

-- 
Mike Stupalov
Observium Limited, http://observium.org

-- Mike Stupalov Observium Limited, http://observium.org