Hi all,

 

Our event log is clogging up with multiple current and voltage threshold entries, for example see below;

Current gi24 PoE Current above threshold: 0.158 A (> 0.1155 A)

Current gi3 PoE Current above threshold: 0.115 A (> 0.102 A)

Voltage gi24 PoE Voltage above threshold: 119 V (> 63.25 V)

Voltage gi9 PoE Voltage above threshold: 113 V (> 60.95 V)

 

Apologies if this is a dumb question, as I’m knew to the software, but does anyone know a good way of removing these entries besides adjusting the threshold of every network device.

Monitoring voltages and currents isn’t a high priority for us, so happy to turn these off globally.

 

Many thanks for your help.

 

Regards,

John Borrow
Systems Administrator
T: 02 8438 9432

M: 0419 269267