I tested snmpwalk myself but I beleave the device/software is somewhat buggy. The snmpwalk gives me timeouts at random points and the cpu of the device goed to 100%

So we have to resolve this first. Cisco TAC is the next stop for us 😊. If we get this resolved we will get back to you…

Best regards,

Jorgo Schmitz
Senior Engineer

Hi Jorgo,

 better if you provide full snmp dump from device as:

snmpbulkwalk -v2c -c <community> --hexOutputLength=0 -ObentxU <hostname> .1 > myagent.snmpwalk
snmpbulkwalk -v2c -c <community> --hexOutputLength=0 -ObentxU <hostname> .1.3.6.1.4.1 >> myagent.snmpwalk

and much better if you provide temporary snmp access to device,
can limit access from ip 77.222.50.30

Jorgo Schmitz via observium wrote on 22/08/2019 13:03:

Hi Adam,

 

Below my answers:

 

RFC1213-MIB::sysObjectID.0 = OID: RFC1155-SMI::enterprises.9.1.2332

RFC1213-MIB::sysDescr.0 = STRING: "IE1000 Industrial Ethernet Switch, Version: 1.8.0#2018-08-08T06:17:24+00:00"

Kind regards,,

Jorgo Schmitz
Senior Engineer

Korton is verhuisd! Ons nieuwe adres is Pondweg 1, 2153 PK Nieuw-Vennep.
Our new address: Pondweg 1, 2153 PK Nieuw-Vennep.

Van: observium <observium-bounces@observium.org> Namens Adam Armstrong via observium
Verzonden: donderdag 22 augustus 2019 11:25
Aan: 'Observium' <observium@observium.org>
CC: adama@memetic.org
Onderwerp: Re: [Observium] Cisco IE-1000

 

What is the sysObjectID and sysDescr for this device?

 

You can get these with:

 

snmpget -v2c -c <community> <ip> sysObjectID.0 sysDescr.0

 

Adam.

 

From: observium <observium-bounces@observium.org> On Behalf Of Jorgo Schmitz via observium
Sent: 22 August 2019 09:46
To: observium@observium.org
Cc: Jorgo Schmitz <J.Schmitz@korton.nl>
Subject: [Observium] Cisco IE-1000

 

Hello all,

 

I have a question regarding Cisco IE-1000-4P2S-LM switch. With following specs:

 

Image                 : ie1000-universalk9-mz.spa.1.8.0.bin

Version               : 1.8.0

Chipset ID          : VSC7428

Board Type        : IE-1000-4P2S-LM

Port Count         : 6

Product              : Cisco IE1000 Switch

Code Revision   : f61c61e+

 

Is it a supported device by observium?  Because observium does not seem to be recognize the device correctly. It is also does not recognized as Cisco. Does anyone has any idea how to resolve this?

Kind regards,

Jorgo Schmitz
Senior Engineer

_______________________________________________

observium mailing list

observium@observium.org

http://postman.memetic.org/cgi-bin/mailman/listinfo/observium