Spencer Ryan | Senior Systems Administrator | sryan@arbor.net

Arbor Networks

+1.734.794.5033 (d) | +1.734.846.2053 (m)

www.arbornetworks.com

On Tue, Nov 17, 2015 at 9:22 AM, Gediminas Karčmarinas <gediminas@kava.lt> wrote:

Hello,
Maybe is some way to get better performance with poller.php ?
poller-wrapper.py(24406): /opt/observium/poller-wrapper.py: polled 1310 devices in 270 seconds with 40 workers

I already disable in what I don't need in '/opt/observium/includes/defaults.inc.php'
$config['mibs']['SNMPv2-MIB'] = 1;
$config['mibs']['IF-MIB'] = 1;
$config['mibs']['OSPF-MIB'] = 0;
$config['mibs']['EIGRP-MIB'] = 0;
$config['mibs']['CISCO-MAC-ACCOUNTING-MIB'] = 0;
$config['mibs']['JUNIPER-MAC-MIB'] = 0;
$config['mibs']['IP-MIB'] = 1;
$config['mibs']['IPV6-MIB'] = 0;
$config['mibs']['CISCO-IETF-IP-MIB'] = 0;
$config['mibs']['BGP4-V2-MIB-JUNIPER'] = 0;
$config['mibs']['FORCE10-BGP4-V2-MIB'] = 0;
$config['mibs']['BGP4-MIB'] = 0;
$config['mibs']['CISCO-BGP4-MIB'] = 0;
$config['mibs']['CISCO-CEF-MIB'] = 0;
$config['mibs']['ENTITY-MIB'] = 0;
$config['mibs']['CISCO-ENTITY-SENSOR-MIB'] = 0;
$config['mibs']['ENTITY-SENSOR-MIB'] = 0;
$config['mibs']['CISCO-IETF-PW-MPLS-MIB'] = 0;
$config['mibs']['CISCO-RTTMON-MIB'] = 0;
$config['mibs']['MPLS-L3VPN-STD-MIB'] = 0;
$config['mibs']['MPLS-VPN-MIB'] = 0;
$config['mibs']['FOUNDRY-SN-SWITCH-GROUP-MIB'] = 0;
$config['mibs']['LLDP-MIB'] = 0;
$config['mibs']['BRIDGE-MIB'] = 0;
$config['mibs']['HOST-RESOURCES-MIB'] = 0;
$config['mibs']['Juniper-UNI-ATM-MIB'] = 0;
$config['mibs']['UCD-SNMP-MIB'] = 0;
$config['mibs']['UCD-DISKIO-MIB'] = 0;
$config['mibs']['Q-BRIDGE-MIB'] = 0;
$config['mibs']['VMWARE-VMINFO-MIB'] = 0;
$config['mibs']['EtherLike-MIB'] = 0;

$config['poller_modules']['unix-agent'] = 0;
$config['poller_modules']['ipmi'] = 0;
$config['poller_modules']['sensors'] = 1;
$config['poller_modules']['status'] = 1;
$config['poller_modules']['processors'] = 1;
$config['poller_modules']['mempools'] = 1;
$config['poller_modules']['storage'] = 1;
$config['poller_modules']['netstats'] = 1;
$config['poller_modules']['hr-mib'] = 0;
$config['poller_modules']['ucd-mib'] = 0;
$config['poller_modules']['ipSystemStats'] = 1;
$config['poller_modules']['ports'] = 1;
$config['poller_modules']['bgp-peers'] = 0;
$config['poller_modules']['junose-atm-vp'] = 0;
$config['poller_modules']['toner'] = 0;
$config['poller_modules']['ucd-diskio'] = 0;
$config['poller_modules']['wifi'] = 0;
$config['poller_modules']['ospf'] = 0;
$config['poller_modules']['cisco-ipsec-flow-monitor'] = 0;
$config['poller_modules']['cisco-remote-access-monitor'] = 0;
$config['poller_modules']['cisco-cef'] = 0;
$config['poller_modules']['cisco-sla'] = 0;
$config['poller_modules']['mac-accounting'] = 0;
$config['poller_modules']['arista-software-ip-forwarding']= 0;
$config['poller_modules']['cipsec-tunnels'] = 0;
$config['poller_modules']['loadbalancer'] = 0;
$config['poller_modules']['cisco-cbqos'] = 0;
$config['poller_modules']['cisco-eigrp'] = 0;
$config['poller_modules']['netscaler-vsvr'] = 0;
$config['poller_modules']['aruba-controller'] = 0;
$config['poller_modules']['entity-physical'] = 0;
$config['poller_modules']['applications'] = 0;
$config['poller_modules']['fdb-table'] = 1;
$config['poller_modules']['graphs'] = 1;
$config['poller_modules']['cisco-vpdn'] = 0;
$config['poller_modules']['wmi'] = 0;

Hardware : SSD INTEL
MEM : 14GB
CPU : Intel(R) Xeon(R) CPU E3-1270 v3 @ 3.50GHz

_______________________________________________
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium