That’s exactly where it comes from.
--
Jay
From:
observium <observium-bounces@observium.org> on behalf of "Ross [Eve IT]" <ross@eve-it.net>
Reply-To: Observium Public Support <observium@observium.org>
Date: Thursday, March 23, 2017 at 1:37 PM
To: "observium@observium.org" <observium@observium.org>
Subject: [Observium] port errors
Hello,
My dashboard is showing port errors and I'm trying to understand where this information is coming from ?
Those are all different routers.
Here's show int of the 1st one.
Are the errors being read from the input error below ?
It's been on Rx: 6 for a very long time, even if I clear the counters.
xxxx-xxxx#show int g0/1/1
GigabitEthernet0/1/1 is up, line protocol is up
Hardware is SPA-2X1GE-V2, address is 0026.0ba5.0a11 (bia 0026.0ba5.0a11)
Description: Management
Internet address is
10.75.1.3/24[10.75.1.3]
MTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive not supported
Full Duplex, 1000Mbps, link type is force-up, media type is RJ45
output flow-control is on, input flow-control is on
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:01, output 00:00:01, output hang never
Last clearing of "show interface" counters 14:22:12
Input queue: 0/375/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 798000 bits/sec, 84 packets/sec
5 minute output rate 56000 bits/sec, 61 packets/sec
3721054 packets input, 4443301060 bytes, 0 no buffer
Received 604 broadcasts (0 IP multicasts)
0 runts, 1224 giants, 0 throttles
1224 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 24679 multicast, 0 pause input
1957690 packets output, 267851747 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 pause output
0 output buffer failures, 0 output buffers swapped out
Thanks in advance!
Ross.